Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
The drilling of hole on the tank was correct , however the plastic material waste which was inside the tank was not removed , tephlon tape applied is incorrect total wastage of tape , first you installed a black material then the vedio was edited it was shown in white . Save money and material of the owner so that it would be a learning opportunity for other PLUMBERS who do the outdated work and also for the new plumbers. Good luck for more improved vedios .
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Are bhai sahab app plastik ka pipe and feeting use kr rahe ho to app ko tank nipal ke sath union lgane ki kya jrurat hai directly connect kijiye na aur kabhi bhi tanki ko change karna ho to pipe line katna hi padega tab bhi lga sakte ho ap union
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Near tank first shall be valve and then other fittings should be started, so whenever any maintenance work is to be done , can be taken up after shutting of the valve.
Union kaun hisab se phle dya hai bhai agar hmko union kholkar pani stock Krna hga tb kya kroge.mai yeh kaam se satisfied nhi hu.....phle valve lgta hai uske baad union..
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Bhai hmari summer 1" inch Hain toh inlet 1" Hoga Toh outlet tank connector Kitna inch mein lagaye or basin Takk Kitna inch mein rahega plz batana Bhai ???
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Why you apply such a lot of tuflan tape ??what is the purpose of using some agent between treads?? It ll not reach full thread dear, and it may create crack in the coupling in the future , due to pressure in the coupling... you can apply litharge and glycerene mix instead
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Koi galat nahi hai fitting me bhai ball walve chahe aage kar do chahe union ko aage kar do isme koi galat nahi hai o to sirf tanki ko aalag karne ke liye kiya jata hai bhai
Avoid using excess gum and press firmly after putting the joints. Another important thing , routing the line from the motor should be close to the wall. If you route the way you have routed, it will be a disturbance while using the floor for any purpose.
Bro u made one mistake before using the unions first u should fit the gate volve then union, 2ndly instead of using double elbow u could easily use one tee and one elbow and that would be better and cheaper, first use tee the upper side of the tee u should connect the exhaust.
كنت باتعمل بعد المحبس القطعه التي على حرف T باتستفيد منها تهويه الى الاعلى والاتجاها الاخر الى الاسفل و وسط القطعه يكون باتجاه الخزان ومنها تكسب نزول اقوى للماء لانه المكان الصحيح للتهوية ومنها توفر للقطعتين التي على شكل L الذي اسرفت فيهم دون فائده .. وتحياتي وتمنياتي لك بالتوفيق
@@mohamedmansoor3652 I’m been plumbing for 10 years. If you are using this much Teflon with this head pressure then just quit your job. YOU ARE NOT a plumber Mohamed.
सबसे बड़ी चुनौती ये है कि टैंक के फर्श में (सरफेस पर)पानी निकास की व्यवस्था बहुत ही जरूरी है।वाटर टैंक बनाने वालों को एक ऐसी व्यवस्था करनी चाहिए, जिससे नीचे जो गंदगी-मिट्टी जमा होने पर टैंक के अंदर साफ करना बड़ा दूभर और मेहनती काम हो जाता है,उसकी व्यवस्था सबसे जरूरी है। अतः टैंक बनाने वालों को कोई नई तकनीक से फर्स की गंदगी सुलभ तरह से साफ हो कि व्यवस्था बनानी चाहिए ।प्रायः होता ये है कि गंदगी साफ नही होने से बहुत से इक्विपमेंट RO मशीन वैगेरह गंदगी-मिट्टी की वजह से बहुत जल्दी जाम वो खराब होते हैं। अतः इस काम पर विशेष ध्यान देकर यदि टैंक बनता है तो वो ज्यादा पसंद करेंगे लोग। उसकी बिक्री भी अधिक होगी।👌
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Eso de usar teflon es prehistorico Ahora llevan una goma o orrin como lo llamen en su pais el fabricante te suministra todo el equipo de instalacion completo
Why you don't install valve before Union now your union and valve both useless if incase anyone have to do something on this pipe line he have to waste all water then he can separate the line....
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
மிகவும் நல்ல பதிவு சார். அனைவரும் பார்த்து தெரிந்து கொள்ளுங்கள். இந்த பதிவு. கொடுத்த. உங்களுக்கு மிகவும் நன்றி சார். அனைவரும் பார்த்து தெரிந்து கொள்ளலாம் மேகநாதன்
Yo veo que usa de ese teflón que es delgado y bien malo y que fuera de eso trae menos que el resto, yo en esas condiciones le mando un rollo de ese teflon basura también 🤷🏽♂️🤷🏽♂️🤷🏽♂️
Es duniya kapahla anokha plumber maine apni jindagi me pahli baar dekha hai 😂😂😂😂😂😂😂
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
ਵਾਲਵਾਲਵ ਪਹਿਲਾਂ ਫਿਰ ਯੂਨੀਅਨ ਲੱਗਣਾ ਸੀ ਤੁਸੀਂ ਦੋ ਕੀਤਾ ਗਲਤ ਹੈ
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Only two wraps of Teflon tape needed on tapered threads,
NOT THE WHOLE ROLL!
Nhi vo thik kiya hai cause it won't be leak
I think, they say: put the tape on it.... Yeees and roll roll and roll :)
In that case, i think it can leak
Water tank threads are called NPT threads and they are tapered and get tight after only three turns, a minimal amount of tape is required.
Why would you put union first it supposed to shutoff valve to tank then union and yes clean as you go.
Amma
Union before stop cork
@@ifeanyigchukwu4975 5th
I also want to say that😜😜😜
Only he want to make video but he dont know where is wrong🤭🤭🤭
The drilling of hole on the tank was correct , however the plastic material waste which was inside the tank was not removed , tephlon tape applied is incorrect total wastage of tape , first you installed a black material then the vedio was edited it was shown in white . Save money and material of the owner so that it would be a learning opportunity for other PLUMBERS who do the outdated work and also for the new plumbers. Good luck for more improved vedios .
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
वीडियो मस्त है भइया जी बॉल बॉल पहले होना चाहिए गलत कम में view ज्यादा मिलता है दोस्त
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Nice video😊😊😊 good job bro👍👍
Itna time leliya yar aur union se pahle ball wall lagana chahiye na agese khayal rakhna yar good job 👍
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Bhai Tum nea tank nipal kea badd kya kya lagya please reply bhai good feeting🎉🎉🎉
Thank you
Bai sahab pehle gate valve lage ga ya union...
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Why so much white seal tap ...Teflon tape is wound, less also can do I think, instead of full role consuming
Gate valve k baad Union lagana chahiye,from Bangladesh
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
RIGHT BRO YAHI M DEKH RAHA HU YAAR
ही plumbing ची माहिती सर्वानाच उपयोगी आहे
This pluming technology is useful to everyone.
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Are bhai sahab app plastik ka pipe and feeting use kr rahe ho to app ko tank nipal ke sath union lgane ki kya jrurat hai directly connect kijiye na aur kabhi bhi tanki ko change karna ho to pipe line katna hi padega tab bhi lga sakte ho ap union
Thank you
Connect to the tank you must put valve before union
Hahahaha... before too long the floor would be crawling with pipes too...
Yes bro
Also the air pipe should be before valve
Silencio pipe or swr pipe dono ek Hoti Hain ya dono alag ????
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Why all of the Teflon tape?
Near tank first shall be valve and then other fittings should be started, so whenever any maintenance work is to be done , can be taken up after shutting of the valve.
ua-cam.com/video/iSnPO7U8AhU/v-deo.html
All moter ka deta sirf 1 mint mai nikale
Correct 1st ball valve and then should be next union you know why because how to repair if trouble shuth
@@reantadeo1266
@Rean Tadeo
U r right!!
whats the purpose of the two long tube facing up?
لاخراج الهواء من الانابيب عند ملئ الخزان عند الافراغ
For air
Air tube
টেপে গুলু লাগাতে ২০ বছরে দেখিনি, প্রথম দেখে অবাক হলাম, কোন টেকনিকেল কলেজের চাএ ভাই
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Union kaun hisab se phle dya hai bhai agar hmko union kholkar pani stock Krna hga tb kya kroge.mai yeh kaam se satisfied nhi hu.....phle valve lgta hai uske baad union..
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Bhai hmari summer 1" inch Hain toh inlet 1" Hoga
Toh outlet tank connector Kitna inch mein lagaye or basin Takk Kitna inch mein rahega plz batana Bhai ???
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Good video bhai air trr KO leboow ke jga lga dete to or unyan ki jga Ball KO 😁
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
The Air Valves should have come before the Unions
and also you have turned the Unions
Ive never in my life seen somebody use that much virgin tape in my entire life 🤣🤣
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
It baffles me too. Then to add pipe cement!!
In India, most of the plumbers like that. When the fittings are in correct size, no need of Teflon tape.
Bai sahab jo kam kr rahe ye kam bagair fit kiye b kr skte the
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Why you apply such a lot of tuflan tape ??what is the purpose of using some agent between treads?? It ll not reach full thread dear, and it may create crack in the coupling in the future , due to pressure in the coupling... you can apply litharge and glycerene mix instead
Why using too much Teflon... Its causes crack the male adapter.and for the end cap why you using solvent..? Then what's the benefit of end cap...?
Or sar ap ny uoniyan bhi pahly lagai hy wol sy
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
Sir khali teflon tape pani kasy rok sakta daga to lagaya nh
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
Bhai cam to flat kr the ho.phele union rhega .ush ke bad volwall rhega.nahi to thki Ka Phani bagar girne legaga
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
First valve and then union to be fitted.
Right
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Electricals and plumbing tools video bro
Super bro 🤣😂🤣😂🤣😂🤣😂
yes you are right！
Kitna easy ho gaya hai pipe ka fitting kerna 😃😃😃
Are waha kitni achi fitting ki....Hamare yaha naye ladke bhi purane tarike fitting kar rahe
which one is cames 1st union or gate valve
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Tank sea 2 hole kiya naa usmea pipe connection thiyaa uska connection ka name kya hea?
Koun sa plumber hai jo ballvalve union ke baad lagata hai
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
I'm new subscriber bhai
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Uniyan pele laga k sabit kar diya ki aap bhot ache pilamwar ho ....🙏🏻
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Nice good job ☺️👍👌💯
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Bhai Kam to galat Kar rahe ho ball valv Union ke pahale lagata hai
Yes
Right
Koi galat nahi hai fitting me bhai ball walve chahe aage kar do chahe union ko aage kar do isme koi galat nahi hai o to sirf tanki ko aalag karne ke liye kiya jata hai bhai
@@AjitKumar-oj7rl tanki ka pani kaise rok skte fir agar pipe line me kahi leek ho to🤔
Yes
Mea bi bhai plumbing apprentice pea hu🎉🎉
Thank you
Your instructions are great. Love your vide and learn much. Keep up the good work!
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Es una exajeracion de teflon,me equivoco?
Wc standard, Union 1st then valve?
Thank you
Avoid using excess gum and press firmly after putting the joints.
Another important thing , routing the line from the motor should be close to the wall. If you route the way you have routed, it will be a disturbance while using the floor for any purpose.
Thank you sir for comment
@@learnpassearnprofessional7467 Thank you for taking my advice in a right spirit.
Wellcome sir
W0al00q
Bro u made one mistake before using the unions first u should fit the gate volve then union, 2ndly instead of using double elbow u could easily use one tee and one elbow and that would be better and cheaper, first use tee the upper side of the tee u should connect the exhaust.
Show us how to install solar water heater?
I love you anuraag bai pro cricket expert love you❤😘🤟🤟🤟❤ from India🇮🇳🇮🇳🇮🇳
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
That is wrong installation gate valve first after uninon...why? If the union lake you drain first water?hehehe...
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
You right
Are you in Uganda 🇺🇬 please location and contacts in which district and how much 6layers 5000liters please
Thank you
@@learnpassearnprofessional7467 am in Uganda 🇺🇬 please I want it location and contacts 🙏
This guys spends more in Teflon tape than I pipes
🤣🤣
Yes. I was also thinking the same
Too much tape man
Customer Ke Paise ke tha kaam with material nahi tha 😝😹
APVC or CPVC Pipe & fittings are durable than pvc pipe & fittings.
Gate valve, union நுக்கும் tank கிற்கும் இடையில் இருப்பது நல்லது.
ஆமாம்,
அது stop valve
كنت باتعمل بعد المحبس القطعه التي على حرف T باتستفيد منها تهويه الى الاعلى والاتجاها الاخر الى الاسفل و وسط القطعه يكون باتجاه الخزان ومنها تكسب نزول اقوى للماء لانه المكان الصحيح للتهوية ومنها توفر للقطعتين التي على شكل L الذي اسرفت فيهم دون فائده .. وتحياتي وتمنياتي لك بالتوفيق
I cant read the Arabic literature... however thank you very much for your feedback.
May God bless you
Teflon tape sales video!
Why dont connect both outlet? So only circulation inside tank
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Bhai Ji union bad me lagani thi pehle gait valve lagti
Correct
An entire roll of Teflon for one fitting. My boss would fire me on the spot.
You are not plumber rong installation
@@mohamedmansoor3652 I’m been plumbing for 10 years. If you are using this much Teflon with this head pressure then just quit your job. YOU ARE NOT a plumber Mohamed.
Valve k bad elbow ki jaga Tee Laga dete Air k lye tou zada acha tha
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Sorry for saying but you should put valve before union
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
सबसे बड़ी चुनौती ये है कि टैंक के फर्श में
(सरफेस पर)पानी निकास की व्यवस्था बहुत ही
जरूरी है।वाटर टैंक बनाने वालों को एक ऐसी
व्यवस्था करनी चाहिए, जिससे नीचे जो गंदगी-मिट्टी जमा होने पर टैंक के अंदर साफ करना
बड़ा दूभर और मेहनती काम हो जाता है,उसकी
व्यवस्था सबसे जरूरी है।
अतः टैंक बनाने वालों को कोई नई तकनीक से फर्स की गंदगी सुलभ तरह से साफ हो कि
व्यवस्था बनानी चाहिए ।प्रायः होता ये है कि
गंदगी साफ नही होने से बहुत से इक्विपमेंट
RO मशीन वैगेरह गंदगी-मिट्टी की वजह से
बहुत जल्दी जाम वो खराब होते हैं।
अतः इस काम पर विशेष ध्यान देकर यदि
टैंक बनता है तो वो ज्यादा पसंद करेंगे लोग।
उसकी बिक्री भी अधिक होगी।👌
How to repair mild hall in middle part of the tank
Tank mein itna Bada hole Kis Liye bahut gap Rah raha hai cal ko bahut problem bhi ho sakta hai
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Keya name he konsa fitting lagaraye koch nahi boltaye ye kaisa video banaraye bai koch to bolo ya nam malom nahi tomko
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Ok then make video with all details and with good explain not matter how long the video
Baal walb ke baad union lgane ka n bro?
Nice.video....🙏🙏🙏🙏🙏
Thank you
first bend me tee dalta to..vein pipe usme daal sakte the...1 bend kam ho jata thaa
Hhùb
itni derr main tank k saath pressure pump bhi laga deta c.p.v.c. aashirwaad hota toh
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Kyo Bhai get wall ke jagah par union laga rahe ho.
1. Get wall
2.union
3.air pipe
Que tal jajajajajaja te pasaste de lanza con los 4 kilos de teflón para cada conector mucho gasto
Yo veo que es de eso teflón malo y delgado que no sella nada.
Clean as you go. The plumber or tech doesn't have to wait until he finished the job before do the cleaning
Air vent ke pipe wrong Lage hain air lock ho gi confirm
@@muhammadrafique2889 को
this more than 400 liters tank bro
Aquí en México a esos trabajadores les llamamos chambones! Pésimo trabajo!
First Tank Nipeel Tee Elbow Ball Vall Last Uonin Pipee Fitting Karana Bhai
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you
Is this really 400 litres tank ?
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Please reply is it 400 litre water tank or not ? Nobody would share & like such wrong videos.
Y saab jo gate valve ke paas elwo hai baha par tee lga dete 2 elwo weste hone se bach jate aur air vi niklti
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Bhaii unian se phle valve lgana k howh
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
u shud use two 45 instead of 90° bend for better water pressure
Thank you
من الأمثل تركيب المحبس قبل الاكور التجميع
Ball Valve to union se pehle lgana chahiye or or elbow ki jagah t lgate to usi Mai air system bhi ban jata or bend bhi mil jata
Good
Plumber Is V V Good Mechanic fitting V V Well Thanks Take 1 hr
العمل فيه خطأ التنفيس الخاص بالخزان يجب ان يكون عند نقطة نزول الماء وليس تنفيس على البلاط ...،
والخطأ الثاني القفل او الكاك لازم قبل النونيه مو بعدها
Elbo ki jgah t lgegi bhai
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
100 percentage the plumber belong to Orissa. Where he learnt plumbing. Great Oriya plumber.
I have 10 years expierence in Sadie bay wrong your installation about water tank why you put 1st union valve
Thank you
Is it 400 ltr tank.but in appearance its big and a higher cap one.
I don't know... I think they need more Teflon tape.😅🤣
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
The vent pipes should be on the vertical down pipe
Thank you so much for your comments. Please share our videos to your friends and family. Like us support us for more.
Val valve unions k phila lagna chya
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Sir
Air lock pipe should be kept before the bend...
UA-cam/DCS vizag
Yes,
Later on we modified thank you for your valuable feedback.
May God bless you
Very easy and perfect fitting
Eso de usar teflon es prehistorico
Ahora llevan una goma o orrin como lo llamen en su pais el fabricante te suministra todo el equipo de instalacion completo
Que raro si en estados unidos siguen usando el teflon o pasta teflon
Prehistórico??😂😂😂😂
Pasta sella roscas Siller.
It's high time to change the hacksaw blade. What a rusty one he is using
Har bar union khil k lagana chaye solution joint me ja sakta hai or union useless ho jayega
Why you don't install valve before Union now your union and valve both useless if incase anyone have to do something on this pipe line he have to waste all water then he can separate the line....
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
अगर पाइप की मेंटीनेंस की जाए बिना पानी खालई किए तो कैसे करेंगे ????
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Used 4 rolls of Teflon tape- wtf?
😂😂😂👍
OMB WALL MAGIC COAT 🔥 क्या आप गर्मी से परेशान हैं क्या आप गर्मी से मुक्त होना चाहते हैं यदि हा तो हम आपके लिए लाए हैं गर्मी कम करने वाली बाहरी कोटिंग
Thank you
Which company of tank
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Phle valve lgana tha gr union m koi problem hogyi phir kese pani ko rokoge
That wasn't perfect!
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Air pipe bro????
Thank you
Good job
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Sath bol k bataya bhi kryn
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
மிகவும் நல்ல பதிவு சார். அனைவரும் பார்த்து தெரிந்து கொள்ளுங்கள். இந்த பதிவு. கொடுத்த. உங்களுக்கு மிகவும் நன்றி சார். அனைவரும் பார்த்து தெரிந்து கொள்ளலாம்
மேகநாதன்
''
Yo veo que usa de ese teflón que es delgado y bien malo y que fuera de eso trae menos que el resto, yo en esas condiciones le mando un rollo de ese teflon basura también 🤷🏽♂️🤷🏽♂️🤷🏽♂️