Best idea for quick disconnect I’ve seen! Idk how many YT videos I watch where people don’t have those and it really makes me question their IQ. Maybe they don’t fish in current or waves but I wouldn’t want to get in a bind and have to grab a knife to cut myself loose cuz now you’re in a sketchy situation and holding a blade!
I use a strong floating bungeecord as anchorline it gives a very smoth and comforty time on the water, as a quick release i have Cam Cleat, works very good. And on the anchottrolley i have a carabiner i just snap in the anchorline then i dont have to pull it true the ring.
Nice rig but I would reconsider the rope attachment location on the anchor, recovery is important so tie the rope to the bottom hole on that anchor and the run rope up side of anchor and zip tie to the top of anchor. That way when stuck you can pull anchor in opposite direction breaking zip tie and pull from bottom of,anchor disslodging the grapples from underneath whatever is holding down.
Should mention to use a small zip tie. They're pretty tough if you get one to big. Also the force you use to break the zip tie is instantly reversed when it breaks so mind your balance when you have to break it. The ones I use have an 18 pound tensel strength. Also remember that the ring of the anchor can slip past the now wide open top end of the anchor. I put another small zip tie in the top hole not attached to the line and left a short end of it sticking out to help stop the ring from slidding off. Just my 2 cents. Maybe it'll help someone?
I posted a video just like this one about a year ago trying to explain this exact same thing about "quick release" anchor. I did this because there weren't any real quick release videos that truly allowed the anchor to release quickly. the way I've done it is very similar to your method. But however the method the main thing is safety and being able to get that anchor away is a safe deal. i wish more folks would see how effective this method is
Thanks. Interesting how you made a handle for your anchor storage unit. Going to buy a 5’ piece of 3” PVC and make two storage units like yours. My wife watched your anchor video and wants one too. Guess we’ll have anchors before we have kayaks. Keep um coming!
@@SRadigFishing think I'll just put the cords through the stainless steel hard ware where the carry handles are on the front and rear so I don't have to drill holes in my kayak.😁
It is the type used on sail boat rigging. I will try to get you a picture. I got mine from a friend who repacks industrial life rafts, it is one of the parts they change out to re-certify.
I'm new to kayak fishing and have been looking for videos to help me. This one is outstanding! Thank you. What weight of anchor shud I be using for my single person fishing kayak?
Steve - one more question - any idea what size the quick release is? I'm looking at them on Amazon but have no idea which one to get. Size 2 comes in a 2 pack for about $18 but I'm not sure if it's the right size for the setup. Thanks again for a great video. Can't tell you how many times I've watched it.
@@soundsofstardom8713 this is what I bought on Amazon and they work great!! www.amazon.com/gp/product/B0771NR9ZF/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Nice video, thanks for taking the time to publish this. I just bought the Yakattack HD Lever-Loc trolley. I have the same PA14 as you. I have only one outing in my yak at this time and I’m trying to figure out if the Port (left) side would be the best to install the trolley. What are all the factors considered when choosing a side? I do cast right handed but the one time I went out I usually casted from the right side and then out off the Port (left) side of the yak (so I was retrieving from the left side). For me to cast out to the STBD (right side) I have to cast more over my head (rarely do this). I’m considering installing on the right side (STBD). Also, what system do you use to lock your trolley to the bow or stern? Finally, could I just use a zig-sag or regular cleat with my anchor line? Seems to me a system like yours, you are limited to a fixed length of anchor rope. I do only fish 10-25’ depths in mostly still water.
I side arm cast and retrieve from the right. It is really no big deal if you do tangle, the boat is stable enough to reach out to either end. I am at about 80 trips and love this kayak. I did a pro's and con's at 55 trips on my channel. Really the only con is the price!
@@SRadigFishing I also have the question regarding adjusting your anchor rope length. It appears your length is fixed. How do you adjust for shallow water? I fish both lakes and salt water. Depths vary between only a few feet to 40 feet. Building the PVC carrier this weekend. That looks so much better than the bag my kit came with.
@@jeffcarter2144 It is shallow everywhere around here, about 8 feet deep at the most. I have about 25 feet of line and that has been enough so far but I carry an extra 50 feet to add on if needed.
All well and good but...you have the anchor tied incorrectly. You tie a claw anchor from the bottom and zip tie the main line to the top loop (NOTE: Only the zip tie goes through the top loop holding the anchor line) so if the anchor gets hung up you can pop the zip tie and the anchor pulls up from the bottom unsnagged.
Do you ever want to anchor in the middle of your kayak? Also what is a situation you would need to quick disconnect? I'm trying to learn as much as I can before I purchase my first Kayak. ( I mostly plan on fishing in calm lakes until i really understand everything then move into my states rivers)
Yes I have anchored in the middle to be broad side to an outlet, you must be in low current to do this and be stable. The main reason to quick release is when you hook up with a big fish that might spool you so you can chase them down.
S. Radig Fishing i bought a dog leash today, just need to figure out a way to keep it floating, if I need to throw it. Have it clipped on to my seat with an S carabiner. I guess maybe I could put a pool noodle on the leash housing
I connect my rope to the bottom eye of the anchor and use a very small cable tie, through the top eye and around the anchor chain. If I get snagged, a sharp tug, the cable tie breaks and the anchor is pulled up backwards from the bottom eye.
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
5 years on and you’re still helping the younger generation keep safe! Installed an identical set up on my kayak today.
Thanks for watching!
That's the best trolley explanation I've seen yet. I'll be a hobie angle noob here in a few months so thanks for the great info.
Best idea for quick disconnect I’ve seen! Idk how many YT videos I watch where people don’t have those and it really makes me question their IQ. Maybe they don’t fish in current or waves but I wouldn’t want to get in a bind and have to grab a knife to cut myself loose cuz now you’re in a sketchy situation and holding a blade!
Thanks, I agree with you 100 percent. My main use is when a big red decides to go in circles around the kayak when close to landing.
Thanks for the video. You’ve developed some innovative ideas over the years that I will adopt. No point in reinventing the wheel!!
best explanation of a anchor trolley and and anchor. ( Melbourne Australia)
I use a strong floating bungeecord as anchorline it gives a very smoth and comforty time on the water, as a quick release i have Cam Cleat, works very good. And on the anchottrolley i have a carabiner i just snap in the anchorline then i dont have to pull it true the ring.
Nice rig but I would reconsider the rope attachment location on the anchor, recovery is important so tie the rope to the bottom hole on that anchor and the run rope up side of anchor and zip tie to the top of anchor. That way when stuck you can pull anchor in opposite direction breaking zip tie and pull from bottom of,anchor disslodging the grapples from underneath whatever is holding down.
Your 100% correct. I do that when in other places but the main areas around here that I fish are all mud bottom. Should have shown and expressed that.
@@SRadigFishing how did you set up your quick anchor disconnect. Couldnt tell from the video....
@@jpa1967 I have it tied wit 1/4 inch nylon rope.
Should mention to use a small zip tie. They're pretty tough if you get one to big. Also the force you use to break the zip tie is instantly reversed when it breaks so mind your balance when you have to break it. The ones I use have an 18 pound tensel strength. Also remember that the ring of the anchor can slip past the now wide open top end of the anchor. I put another small zip tie in the top hole not attached to the line and left a short end of it sticking out to help stop the ring from slidding off. Just my 2 cents. Maybe it'll help someone?
I agree. As a newbie this is the best explanation I have seen. Thanks!
I posted a video just like this one about a year ago trying to explain this exact same thing about "quick release" anchor. I did this because there weren't any real quick release videos that truly allowed the anchor to release quickly. the way I've done it is very similar to your method. But however the method the main thing is safety and being able to get that anchor away is a safe deal. i wish more folks would see how effective this method is
I will check out your video to see if I can use some of your system to improve mine. Thanks.
Ingenious! I think this is how I’m going to set my anchor system up for my kayak. 🤗 Thanks!
Great idea. Thanks for sharing.
Great video. Think this is one of the best ones yet that really explains how it works. Thanks!
Nice idea to store the anchor and rope buddy. I like it!
Thanks. Interesting how you made a handle for your anchor storage unit. Going to buy a 5’ piece of 3” PVC and make two storage units like yours. My wife watched your anchor video and wants one too. Guess we’ll have anchors before we have kayaks. Keep um coming!
Hope it works out for you. I have had better storage since going this route.
@@SRadigFishing please share. What better solution did you go with after this?
@@chazzman8206 still staying with this one.
What an awesome idea great video, I want to put one on my kayak but I don't want to drill holes in my kayak.
I know the feeling, I don't want to drill holes in mine either.
@@SRadigFishing think I'll just put the cords through the stainless steel hard ware where the carry handles are on the front and rear so I don't have to drill holes in my kayak.😁
Safety first. Great idea. Thanks buddy.
Everything about this clip is helpful and informative, thank you!
Thanks for watching.
Great video and great cheap storage thank you very much 👍
Well I enjoyed that video! Thank you!
Great explanation and recommendations. Thank you for this video
quick release is a good idea, but I wish you would have given us a close-up shot of the quick release.
It is the type used on sail boat rigging. I will try to get you a picture. I got mine from a friend who repacks industrial life rafts, it is one of the parts they change out to re-certify.
I'm new to kayak fishing and have been looking for videos to help me. This one is outstanding! Thank you. What weight of anchor shud I be using for my single person fishing kayak?
You won't need more than 5 pounds. We are mostly mud here so I don't have much experience anchoring a kayak on rocky bottoms.
I just received my new slate blue vibe seaghost 110 and I was looking for the best way to anchor .
I hope you enjoy kayak fishing and your new kayak. Good luck.
Great video, thank you.
I have the same setup except I tie up on the cleat 😃👌
Steve - one more question - any idea what size the quick release is? I'm looking at them on Amazon but have no idea which one to get. Size 2 comes in a 2 pack for about $18 but I'm not sure if it's the right size for the setup. Thanks again for a great video. Can't tell you how many times I've watched it.
Can't find any size or numbers at all on these. I would say it has about a 1 inch throat or loop closed size whatever you call it.
i can't find anything but hose couplers??? what exactly are they called???
@@soundsofstardom8713 this is what I bought on Amazon and they work great!! www.amazon.com/gp/product/B0771NR9ZF/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
Nice video, thanks for taking the time to publish this. I just bought the Yakattack HD Lever-Loc trolley. I have the same PA14 as you. I have only one outing in my yak at this time and I’m trying to figure out if the Port (left) side would be the best to install the trolley. What are all the factors considered when choosing a side? I do cast right handed but the one time I went out I usually casted from the right side and then out off the Port (left) side of the yak (so I was retrieving from the left side). For me to cast out to the STBD (right side) I have to cast more over my head (rarely do this). I’m considering installing on the right side (STBD). Also, what system do you use to lock your trolley to the bow or stern? Finally, could I just use a zig-sag or regular cleat with my anchor line? Seems to me a system like yours, you are limited to a fixed length of anchor rope. I do only fish 10-25’ depths in mostly still water.
I side arm cast and retrieve from the right. It is really no big deal if you do tangle, the boat is stable enough to reach out to either end. I am at about 80 trips and love this kayak. I did a pro's and con's at 55 trips on my channel. Really the only con is the price!
@@SRadigFishing I also have the question regarding adjusting your anchor rope length. It appears your length is fixed. How do you adjust for shallow water? I fish both lakes and salt water. Depths vary between only a few feet to 40 feet. Building the PVC carrier this weekend. That looks so much better than the bag my kit came with.
@@jeffcarter2144 It is shallow everywhere around here, about 8 feet deep at the most. I have about 25 feet of line and that has been enough so far but I carry an extra 50 feet to add on if needed.
All well and good but...you have the anchor tied incorrectly. You tie a claw anchor from the bottom and zip tie the main line to the top loop (NOTE: Only the zip tie goes through the top loop holding the anchor line) so if the anchor gets hung up you can pop the zip tie and the anchor pulls up from the bottom unsnagged.
Your 100% correct but it is all mud here in Louisiana and we don't have to worry about losing an anchor. I should be using a plow style here.
Do you ever want to anchor in the middle of your kayak? Also what is a situation you would need to quick disconnect? I'm trying to learn as much as I can before I purchase my first Kayak. ( I mostly plan on fishing in calm lakes until i really understand everything then move into my states rivers)
Yes I have anchored in the middle to be broad side to an outlet, you must be in low current to do this and be stable. The main reason to quick release is when you hook up with a big fish that might spool you so you can chase them down.
Hi good vid and idea how long is the pvc to keep anchor rope and float in ? Tia
4" diameter and about 24" long.
Hi thnx so much Ross from Australia
What about if you want to adjust the length of your rope? I’ve heard of using a retractable dog leash. Trying to get some ideas.
Just a suggestion, if you come up with anything that works please let us know. I will try anything out. Dog leash is a good idea!
S. Radig Fishing i bought a dog leash today, just need to figure out a way to keep it floating, if I need to throw it. Have it clipped on to my seat with an S carabiner. I guess maybe I could put a pool noodle on the leash housing
Thanks
Where can we buy this Quick Disconnect part?
I get them at a sailboat supply store. They use them in the running rigging. Called a quick disconnect shackle.
Great vid! How long is your anchor rope?
25 foot and I keep another 25 feet to add if needed. I very rarely actually anchor, too worried about where the fish might be.
@@SRadigFishing same here. I’ve been looking for a quick release option for anchoring. Your video helped. Thank you
that quick release seems to hang up on the rope every time
Nice brooo...
thanks dad
What kind of quick disconnect is that and where would I buy one? Thanks
It is a quick disconnect stainless shackle like used on sailboats. Most marine supply stores will have them.
How does the bouey keep from sinking of it's at a fixed point on the rope?
Mostly fish less than 6 feet deep around here. Not much deep water close in at this area.
Is there another name for the stainless steel quick connect? I can not make a visual on the tutorial.
Quick disconnect shackle, used mostly on sail boats. I will try to get a picture to send you.
What if your in shallow water and you don't need to use all of your line? Can you still make the quick release work somehow?
I just tie a drop knot at whatever length I need.
@@SRadigFishing thank you i will look into how to make one of those
Steve - what weight anchor are you using and how much anchor line will your PVC storage hold? Thanks
I think it is an 8 pound anchor. and I have 50 feet of line on it.
Thanks Steve. Your answer saved me trial and error time copying your anchoring system.
is that a 3 or 5 lb anchor? I am currently using a 5 for my kayak with no trolley system and am doing some research to get a trolley set up
Its five pounds. We are totally mud bottom here so I don't have to worry about hanging up.
How do you adjust anchor depth?
Mostly fish real shallow water here so I just have 20 foot of line made up. Don't adjust for depth.
Steve - do you use a 3 or 4 inch pvc for your anchor storage? Thanks?
3 inch.
Where did you buy that clip or snap that you have for your quick release system?
I got it from a friend. They are quick releases used on sail boats. They work great but the price will be ridicoulous!
Found some on amazon for a reasonable price and good reviews
What kind of anchor is it
Small 5 pound folding.
👍🏽
I connect my rope to the bottom eye of the anchor and use a very small cable tie, through the top eye and around the anchor chain. If I get snagged, a sharp tug, the cable tie breaks and the anchor is pulled up backwards from the bottom eye.
That has been in my to do list, I am going to set the anchor up exactly like that. Thanks
was that a fart at 3:55?
=P
Just a noise from the peddle drive!
@@SRadigFishing heheh just messin!
@@glenfishing LOL, you made me look, I have been known to Fart during videos!
Great ideas, thanks