We don’t usually, but thought it would be fun since it was the first oil change on that machine and it had been making a bad noise at times during gear shifts.
Awsome video . Philip Arizona Kid here . This will help me do my first LOF . My channel I think I will stick with trail rides . But can’t promise . Ha ha
Haha I’ve lost count of how many top ends I’ve had to rebuild because of them old filters, new ones you have to get a hammer to put the cover back on if they’re backwards. Most of the machines I’ve seen it happen on are running fram filters that haven’t been marked. Also, valves need checked 😉 probably don’t need adjusted but I’ve seen em tight tight like 3 thou before
Also don't trust Honda when you purchase a filter that it's the right filter even though you've given them all the information you could possibly give them for the bike.
Which manual are you using? We followed page 147 of the manual that came with the machine which is for a 2020 Foreman Rubicon Deluxe (TRX520 FA7). It states to add approximately 4.0 US quarts of oil to the crankcase, let it idle for 3-5 mins, let it sit for 2-3 mins, and then add more oil if necessary.
Southwest ORV You are correct. Thanks for the reply To clarify I was wrong. Bc I was looking at the 520 manual transmission model It holds 3.2 quarts All other models hold 4 quarts Mine is a 520 fm6 EPS with footshift
Just you. 😁 That's what new oil looks like, or oil after 100 miles in this case. Might have looked watery with the flashlight shining through it. Thanks for watching.
We put it in right. The story in the video was a time when he did an oil change and someone had put it in backwards. Lol. Like you said, the filter says which way it goes.
This is the part number that is recommended on Partzilla for the 2020 Deluxe model (TRX 520 FA7): Honda 15412-HP7-A01. www.partzilla.com/product/honda/15412-HP7-A01?ref=49b3d9cd8e4cbfd1f9b9fbfad305a89f25a45266
Southwest ORV I actually went to auto zone and bought the same thing but it’s Kot the factory filter. So the spring doesn’t have anything to press against when putting cover back on :/
So that part number wasn't the right one? I remember the dealership actually gave us the wrong one and it sounds similar to what you had. My buddy does a lot of service work on atv's and had the right one on hand so we installed it. I don't know exactly what part number he had, but he orders off of Partizlla.
I’ve never seen cutting up a filter after a change. Nice
We don’t usually, but thought it would be fun since it was the first oil change on that machine and it had been making a bad noise at times during gear shifts.
Very helpful . Thank you for taking the time to do this.
You're welcome! We aim to help.
Thank you for sharing this video I’ve been waiting on my local Honda atv dealer 3 weeks too change my oil I’ll just do it myself next time!
Sure. It's really not too hard, especially with how good the owners manual explains it all with illustrations.
Great video, thank you! Fixing to change the oil in my 2022 rubi
You’re welcome! Thanks for watching.
Gracias! Apenas compre una honda rubicon 2020 deluxe como la que tienes. Gracias por el video
I barely got one ATV like you got thanks for the video!
De nada. Felicidades por tu compra. Espero que lo disfrutes tanto como nosotros!
Hope we see more maintenance videos on the 2020 Rubicon 520
Sure will.
Awsome video . Philip Arizona Kid here . This will help me do my first LOF . My channel I think I will stick with trail rides . But can’t promise . Ha ha
Thanks. Have fun on the trails.
I liked it, I subscribed. Thank you
Thanks!
Awesome job thanks for the info.
You bet! Glad it was beneficial.
Thanks very much, very helpful.
You're welcome! Glad it helped.
Thanks for sharing
Thanks for watching! Hopefully it was helpful.
Haha I’ve lost count of how many top ends I’ve had to rebuild because of them old filters, new ones you have to get a hammer to put the cover back on if they’re backwards. Most of the machines I’ve seen it happen on are running fram filters that haven’t been marked. Also, valves need checked 😉 probably don’t need adjusted but I’ve seen em tight tight like 3 thou before
Thanks for the tip!
Hope to see coolant and Gear oil change video
We'll definitely do some more service videos.
So why you didn’t do a valve adjustment
Didn't seem to need a valve adjustment at 100 miles.
So the service doesn’t need the differentials fluid to be changed?
That I’m not sure of. We were just doing an oil change “how to” video.
Amazon has everything
Very true!
What kind of oil dose it take ??
Honda HP4S is our preferred oil.
What kind of oil did you use 10 W 30 0r 10W-40 and do you know any places to get a oil filter online?
I used 10W 40. I bought the filter from the dealership, but my friend has gotten it from Partzilla.
Anyone have a link to a kit for this oil change? Exact model just 2021
I don't. I ended up buying the oil and filter from the dealership.
You put that oil filter on there backwards!
Several folks have pointed that out now. Thanks for watching!
He put it in right that model goes in that way spring on outside.
Also don't trust Honda when you purchase a filter that it's the right filter even though you've given them all the information you could possibly give them for the bike.
Makes sense! Always double check. I agree.
How much oil does it take?
4 quarts per the manual.
4.6 liters if you change the filter
Manual states 3.2 quarts
You added a gallon?
That’s 4 quarts
Which manual are you using? We followed page 147 of the manual that came with the machine which is for a 2020 Foreman Rubicon Deluxe (TRX520 FA7). It states to add approximately 4.0 US quarts of oil to the crankcase, let it idle for 3-5 mins, let it sit for 2-3 mins, and then add more oil if necessary.
Southwest ORV
You are correct. Thanks for the reply
To clarify
I was wrong.
Bc I was looking at the 520 manual transmission model
It holds 3.2 quarts
All other models hold 4 quarts
Mine is a 520 fm6
EPS with footshift
Nice. Glad we both had it right for our machines. :)
Isn’t there 2 drain plugs on the Rubicon ?
is it just me or does he have very watery oil ????
Just you. 😁 That's what new oil looks like, or oil after 100 miles in this case. Might have looked watery with the flashlight shining through it. Thanks for watching.
It's a break in oil
The oil filter is in backwards if you read i side of it it says outside or inside😭😭😂😂
We put it in right. The story in the video was a time when he did an oil change and someone had put it in backwards. Lol. Like you said, the filter says which way it goes.
You put the oil filter in backwards 😂😂😂
Coo-coo for cocoa puffs! We put it in correctly. ;)
Southwest ORV what oil filter part number did you use
This is the part number that is recommended on Partzilla for the 2020 Deluxe model (TRX 520 FA7): Honda 15412-HP7-A01.
www.partzilla.com/product/honda/15412-HP7-A01?ref=49b3d9cd8e4cbfd1f9b9fbfad305a89f25a45266
Southwest ORV I actually went to auto zone and bought the same thing but it’s Kot the factory filter. So the spring doesn’t have anything to press against when putting cover back on :/
So that part number wasn't the right one? I remember the dealership actually gave us the wrong one and it sounds similar to what you had. My buddy does a lot of service work on atv's and had the right one on hand so we installed it. I don't know exactly what part number he had, but he orders off of Partizlla.