Mr B 👍, you've been pretty busy in the hobby, wrenching, modifying 😅. Only one servo to replace 🙄... Damn. Hopefully after that some more quality running time! That force seems to perform pretty good, good work👌.... How do you like it? Probably need a lot more feul in stock now. 🛢️🚛Think that's thirsty. Great vid again man 👊
Thanks Kings, i've been wrenching a lot but i havent been able to burn more than two tanks in a row with this savage, its a shame.. I like the force 32, cheap and reliable but after the modds its kinda more difficult to start and tune... I did not have time to tune it properly since my servo died quickly
@@TastyBRC yeah, wrenching is fun, but two tanks in a row 😲 is not. Hopefully better luck from now on for some nice bashing fun. 🙏 Curious how the engine performs when it's dailed in....... 👊
@@TastyBRC I feel for ya, it's always disappointing when you go on a mission and get your truck out only for something to fail on you but hey at least you didn't end up with a runaway and lots of parts to replace. I hope nothing fails on you next time
I made fangs, increased the timing numbers by opening the crankshaft window and enlarged the exhaust port. Add me on FB and ill send you a photo of my carb 👍
hello friend i wanted to buy the .36 for my savage xl, what do you think? now I have the nitro star s25, would the force .36 be much worse? the gears and would they suffer ? Thank you
salut l'ami, j'ai fini de courir dans mon force.36 installé sur le savage x, j'ai besoin de vos conseils, j'ai une couronne en fer 47T qui use mes dents de cloche, que puis-je faire ? en quels matériaux ces 2 composants doivent-ils être constitués ? je vais suivre ton conseil merci
Salut, il n'y a que 2 causes possibles à l'usure prématuré de ta cloche d'embrayage: mauvais entre-dent ou cloche de mauvaise qualité. J'ai eu ce problème avec des cloches de très mauvaise qualité Alixprss. Avec des cloches HPI et l'entre-dent correctement réglé tu n'auras pas ce problème. Quelle est la marque de la cloche et couronne que tu utilises actuellement ?
@@TastyBRC la couronne en métal est un 47t de chez aliexpress, la cloche est maintenant abîmée je ne sais pas de quelle marque il s'agit. pense qu'il n'a été détruit que pendant le cambriolage au ralenti. donc vous recommandez la couronne et la cloche en métal de qualité, sont-elles toutes les deux en métal dans votre vidéo ?
@@TastyBRC la couronne en métal est un 47t de chez aliexpress, la cloche est maintenant abîmée je ne sais pas de quelle marque il s'agit. pense qu'il n'a été détruit que pendant le cambriolage au ralenti. donc vous recommandez la couronne et la cloche en métal de qualité, sont-elles toutes les deux en métal dans votre vidéo ?
@@kvdb3865 Tu as la cause du problème, mauvaise qualité des pièces ! J'utilise une couronne acier Robinson Racing, les plus solides, mais les HPI sont très bien. J'utilise aussi une cloche d'embrayage HPI, elles sont très durables. Les deux pièces sont en acier.
Bro what happend at the end beacues it's the same as my Force 32 over raving mad I changed the clutch shoes but nothing still goes mad when I start it up then cuts out
@@rcmirza70 washers 😅 sry, i need to improve my english. I run OS P4 turbo plugs in every single turbo engine i own, except picco. OS P3 are too hot imo. I also have a hobao 30 but havent tried it yet! It will be in a next video
Hey my Dude!! Niiiiceee video :-) I"ve still waiting that my nearly new but "used" Savage will delivered to me ;-) Anyway ,I was busy doing some more nitro related video stuff to my channel ,like my new video where I show my nitro formula 1 with some light but efficient mods..^^ Do you allready found a suitable Crankcase in order to rebuild your LRP?
Thanks 👍 i will check your videos tonight, i've been busy with this video lately. I bought an sh28 wich id the same engine but..... bad surprise too, that will be another video. Did you find a savage ss?
@@TastyBRC Welcome my dude! Damn..that sounds not good :-( Unfortunately even I had searching the market for arround 10 weeks I wasn"t able to find a Savage X "SS" on proper conditions,only bad ones..However I was able to found one Savage XL 5.9 (The 2014 edition on the orange chassis ) in plenty good allmost new conditions ..It wasn"t cheap,but i have prefered to pay more money for a good one than waist my money to buy a half dead chassis.. I"ve allready bought it,but still waiting to get it .Actually he is staying at home of a good friend from me round about 600km from here..However,it is allready paid and it is mine,that is the most important thing!Even I still must admit that I can"t wait to get him here..
Nothing like a savage sweet tune to my 👂
Love to see the Savage running
Thanks
🍎❤🚘
✌️
Awesome! Great video
Thanks 👍👍
I just rebuilt my Force .32 nitro engine gonna try it in my savage bro
💯💯💯❤️❤️❤️
Mr B 👍, you've been pretty busy in the hobby, wrenching, modifying 😅. Only one servo to replace 🙄... Damn. Hopefully after that some more quality running time! That force seems to perform pretty good, good work👌.... How do you like it? Probably need a lot more feul in stock now. 🛢️🚛Think that's thirsty.
Great vid again man 👊
Thanks Kings, i've been wrenching a lot but i havent been able to burn more than two tanks in a row with this savage, its a shame..
I like the force 32, cheap and reliable but after the modds its kinda more difficult to start and tune... I did not have time to tune it properly since my servo died quickly
@@TastyBRC yeah, wrenching is fun, but two tanks in a row 😲 is not. Hopefully better luck from now on for some nice bashing fun. 🙏 Curious how the engine performs when it's dailed in....... 👊
I'm looking at getting dymite .21 for my buggy bro
Dynamite 21 is ok for the price but i'd rather go for the argus 21 3p rtr, great quality
Engine looks strong, too bad about the servo dying
I have been very unlucky with my savage lately... fuel tank, gearbox, lrp 28 and now the servo 😢
@@TastyBRC I feel for ya, it's always disappointing when you go on a mission and get your truck out only for something to fail on you but hey at least you didn't end up with a runaway and lots of parts to replace.
I hope nothing fails on you next time
@@No1karez thanks, i hope too.. i spend more time wrenching than bashing..
What did you modify on it? And do you have any settings for the carb?
I made fangs, increased the timing numbers by opening the crankshaft window and enlarged the exhaust port. Add me on FB and ill send you a photo of my carb 👍
hello friend i wanted to buy the .36 for my savage xl, what do you think? now I have the nitro star s25, would the force .36 be much worse? the gears and would they suffer ? Thank you
The force 36 is a good engine for your XL IMO, stock transmission sould be ok but shim your diffs very carefully!
salut l'ami, j'ai fini de courir dans mon force.36 installé sur le savage x, j'ai besoin de vos conseils, j'ai une couronne en fer 47T qui use mes dents de cloche, que puis-je faire ? en quels matériaux ces 2 composants doivent-ils être constitués ? je vais suivre ton conseil merci
Salut, il n'y a que 2 causes possibles à l'usure prématuré de ta cloche d'embrayage: mauvais entre-dent ou cloche de mauvaise qualité. J'ai eu ce problème avec des cloches de très mauvaise qualité Alixprss. Avec des cloches HPI et l'entre-dent correctement réglé tu n'auras pas ce problème. Quelle est la marque de la cloche et couronne que tu utilises actuellement ?
@@TastyBRC la couronne en métal est un 47t de chez aliexpress, la cloche est maintenant abîmée je ne sais pas de quelle marque il s'agit. pense qu'il n'a été détruit que pendant le cambriolage au ralenti. donc vous recommandez la couronne et la cloche en métal de qualité, sont-elles toutes les deux en métal dans votre vidéo ?
@@TastyBRC la couronne en métal est un 47t de chez aliexpress, la cloche est maintenant abîmée je ne sais pas de quelle marque il s'agit. pense qu'il n'a été détruit que pendant le cambriolage au ralenti. donc vous recommandez la couronne et la cloche en métal de qualité, sont-elles toutes les deux en métal dans votre vidéo ?
@@kvdb3865 Tu as la cause du problème, mauvaise qualité des pièces ! J'utilise une couronne acier Robinson Racing, les plus solides, mais les HPI sont très bien. J'utilise aussi une cloche d'embrayage HPI, elles sont très durables. Les deux pièces sont en acier.
Bro what happend at the end beacues it's the same as my Force 32 over raving mad I changed the clutch shoes but nothing still goes mad when I start it up then cuts out
At the end my old servo passed away but i have to admit that this force 32 can be finicky
Hello, are you satisfied with the force 32, I'm undecided whether I should buy it or not.
Should I choose 32 or 36?
Yes i am, it is a good engine, but .36 seems to be a good one too. I choosed the .32 because it was cheaper than the .36 otherwise i'll choose the .36
@@TastyBRC There is a price difference of 10 dollars, the price of the engine is only 70 dollars in my country 680 turkish lira its very cheap
@@Savageboss52 70$ !!!!!!!!!! Crazy! Get one of each 🤣 i think that you cant go wrong with these engines, .36 seems to perform better
@@TastyBRC you are so right when my HPi k5.9 dies. i will use it
Which plug did you used in froce 32 ? Plz tell me my truggy engine cut out after 10s when i drive
This engine takes short glow plugs OS A5 should be perfect. You can use a standard glow plug with 2 shims, i run standard plugs lrp n°5
@@TastyBRC shims mean washer and plz tell which best glow plug for hyper turbo 21 thanks for helpin😁
@@rcmirza70 washers 😅 sry, i need to improve my english. I run OS P4 turbo plugs in every single turbo engine i own, except picco. OS P3 are too hot imo. I also have a hobao 30 but havent tried it yet! It will be in a next video
what clutch did you put
Stock flywheel with aluminium clutch shoes, 1mm springs
❤😂🎉😢😮😅😊. ไฟแอดพ์. ???
Hey my Dude!! Niiiiceee video :-)
I"ve still waiting that my nearly new but "used" Savage will delivered to me ;-)
Anyway ,I was busy doing some more nitro related video stuff to my channel ,like my new video where I show my nitro formula 1 with some light but efficient mods..^^
Do you allready found a suitable Crankcase in order to rebuild your LRP?
Thanks 👍 i will check your videos tonight, i've been busy with this video lately.
I bought an sh28 wich id the same engine but..... bad surprise too, that will be another video.
Did you find a savage ss?
@@TastyBRC Welcome my dude!
Damn..that sounds not good :-(
Unfortunately even I had searching the market for arround 10 weeks I wasn"t able to find a Savage X "SS" on proper conditions,only bad ones..However I was able to found one Savage XL 5.9 (The 2014 edition on the orange chassis ) in plenty good allmost new conditions ..It wasn"t cheap,but i have prefered to pay more money for a good one than waist my money to buy a half dead chassis..
I"ve allready bought it,but still waiting to get it .Actually he is staying at home of a good friend from me round about 600km from here..However,it is allready paid and it is mine,that is the most important thing!Even I still must admit that I can"t wait to get him here..
What kind of fuel do you use?
I still have some 25% (Racing experience fuel) but in 2022 it will be over.. only new 16 CE legal will be available
Not clean motor 😥
I agree... it's a shame