I'd be curious to know what behaviors you saw that made it so you couldn't get sensorless homing working. I've been able to get it working on every printer I owned, some easier than others. Voron 350 was the hardest, but figured it out eventually.
Sure, I could home x then home y successfully, however, g28 created alot of issues, the AWD system needs a fancy macro to disable the front motors X1/Y1 when doing sensorless homing, with the combination I have (MCU / Drivers) sensorless homing was simply not plausable for me. We have plenty of other people asking for this type of mod in the discord server so why not make it. Some people prefer sensorless, some prefer endstops... I am a endstop fan.
@@TheVoronModder Makes sense. From the video I thought you were more forced into it, but if it's your preference then it seems like you are going the right route.
@@TheVoronModder I've had similar with x then y and sensorless behaving poorly when heating up, so either too strong and I skipped a step, or too weak and I didn't home fully. In the end what solved it on my V2.4 350 was to home y, then x on g28 using a custom homeall definition and crank the power up a bit. Depending on the temp when homing Y it will still skip a step or two, but then it homes x and everything ends up correct after. So a bit convoluted, but worked in the end for my particular hard to home setup.
@@crashingsux I understand, I personally I prefer mechanical endstops. Mainly because they work without compromise and I can turn the homing speed up. 😂
NIce job. Looking forward to seeing what the results are for a 6month to year long test. But seriously cool AF
Right there with you. Trident is next!
@@deeply999 update. 2.4 is working fanatically well with AWD. No different that a regular 2.4 build. Just more power.
Hi that integrated endstop mount for Y looks good :) can you share stls ? very thanks
Can you post an installation video of building the pulley stack.
I'd be curious to know what behaviors you saw that made it so you couldn't get sensorless homing working. I've been able to get it working on every printer I owned, some easier than others. Voron 350 was the hardest, but figured it out eventually.
Sure, I could home x then home y successfully, however, g28 created alot of issues, the AWD system needs a fancy macro to disable the front motors X1/Y1 when doing sensorless homing, with the combination I have (MCU / Drivers) sensorless homing was simply not plausable for me. We have plenty of other people asking for this type of mod in the discord server so why not make it.
Some people prefer sensorless, some prefer endstops... I am a endstop fan.
@@TheVoronModder Makes sense. From the video I thought you were more forced into it, but if it's your preference then it seems like you are going the right route.
@@TheVoronModder I've had similar with x then y and sensorless behaving poorly when heating up, so either too strong and I skipped a step, or too weak and I didn't home fully. In the end what solved it on my V2.4 350 was to home y, then x on g28 using a custom homeall definition and crank the power up a bit. Depending on the temp when homing Y it will still skip a step or two, but then it homes x and everything ends up correct after. So a bit convoluted, but worked in the end for my particular hard to home setup.
@@crashingsux I understand, I personally I prefer mechanical endstops. Mainly because they work without compromise and I can turn the homing speed up. 😂
you actually need content to get subscribers. I'm outa here
Okay! UA-cam is NOT my day job fyi. This is a hobby.
wtf do you think this video is?? peace out loser