Me too. I couldn't believe there is actually a video. I'm glad, because, even though I'm a relatively intelligent guy, these instructions were not only mystifying, but also completely wrong! Thanks to Michael, I got it right. UA-cam Rocks!
I still can't figure it out even with this video...I think I'm just old lol. Next time can you be in front of your camera and show the pieces up close to the camera. I appreciate you doing this. Thank you young man 👍
Thanks buddy!!! I ordered one from Amazon. It’s the same structure but, a different brand. It came w/ no instruction. You did a great job constructing & explaining. ✨Appreciate it!✨
Thank god I found this kids video! Well done; i spent TWO hours before i found this kid. Instructions are crap; the device is fine. Get it together ZENNA!!!
Thank you very much for your video. I was able to not throw this away out of frustration. After trying for 1/2 hour and read I don’t know how many times the stupid instruction I was able to do it :). 👍🏻
I had the parts out all morning and the instructions made absolutely no sense. Now that you've shown me I had it together and organized in my bathroom in about 10 minutes-thank you!
THANK YOU, THANK YOU, THANK YOU!!! it's 2021 and the instructions seem to be the same....CONFUSING!! Thanks, again, Michael, great job explaining this.
Very good young man very well spoken and I definitely appreciate you because I was about to take this product back to the store and saw your video and now it is up in my bathroom thanks to you...
OMG I just bought one of these four-shelf jobs from Home Depot, it cost me like $35 and doesn't even really have a locking top spring top bar assembly. You can adjust for height, of course, but the top spring and stays just kind of float inside the top bars, so you have to kind of pull the bar down on springs to clear the ceiling as you place the whole thing, instead of cranking the top bar in place to the spring assembly so it locks, as in some of these models. Ah well. It took me like 45 minutes of screwing with it and rereading the instructions to finish it. It did stay in, and looks pretty good thus far. I thought I'd bought a locking-spring-bar model, but I guess that one was like $125 at Home Depot. The best laid plans.....anyway, your video makes it a lot clearer. The problem with this model is if you lose grip on the top bar, you could have it slam into something and damage drywall or some other materials that are in the way. The locking one is a lot more foolproof.
@@brandynicole1910 Oof! Not good. I managed to install this thing two years ago and it hasn't moved since! Thank God. i also got a new curtain and liner recently and that was a good investment as well. I had some handyman install a curved shower curtain rod two years ago also, moving into a rental house, because I was having trouble drilling for some reason into the bath wall, and I didn't have the patience. It should have been an easy job, but wasn't.
Thank you! A few more hints: the white caps that go with the spring are placed INSIDE the top and bottom of the tube containing it. Also, you may not need all the black tubes that go on top of the spring. If the caddy is too tall for your tub, try taking one or two out.
Would the black things above the spring have to do with why ours is not going directly up the wall? It kind of bends out liek if theres too much tension
First the negatives: 1) volume was so low I had to run my volume control to the max. 2) but you muttered and I was unable to understand you even (I'm an old man) at full volume but my wife was. 3) When you began assembly you positioned yourself with your back to the camera blocking a view of the tubes -- you should have sat on the far side of the tubes so it was easy to see what you were doing. 4) The camera shaking the entire time was unnerving. Now the positives: We had thrown it in the trash, but I found this video, dug all the parts out of the trash and, using your video, made it work. Thank you very much. Now some tips for others: Opening means the distance from the ceiling to where the bottom of the pole will rest. Tapered tube means a straight tube with a tapered end. Tube D is 19 inches long with a tapered end. Tubes A & B are used for all assemblies. For a 60 inch opening you add only tube D. 62 - 67 1/2 inch openings only require tube C. 71 1/2 - 81 1/2 inch openings use both tubes C & E. Above that use all tubes. You must determine how many spacers (the black things) are needed for your opening. Our opening was 69 inches and needed no spacers. Thanks again jim
Great job! Yes, the instructions are horrible, which is why I came here. The instructions also don't mention the spacer inserts, which are plastic, and required, if you want it to fit in a higher ceiling situation. Anyway, thank you, you also saved me time. 😂 correction, part F, no picture, initially, but part F. 😂 had to use all three. The installation procedure isn’t really difficult, I think I had it four minutes into the video, but without those four minutes, I’d still be yelling at it!! Good job!!!
"So, I thought I would give it a try while he walked away and thought about it..." LMAO We all know what that meant. He stormed off and made a sacrifice to Satan.
Wow i wish i watched you,i made a mess out of mine,cracked one shelf,and it says to fit mine i have to cut half off a bar ,How in the world am i supposed to cut a bar ? I dont have tools for that! Anyway you are a smart kid,sorry young man,Mines wobbly. The other bar was way to long ,without it its wobbly. Im going to give wayfair i talking too tomorrow for sure. I wish you were my grandson ,i would be asking you to come put my stuff together for me.great young man to do that for your dad.take care,keep up the good work.i subscribed i want to watch more,maybe ill learn how to put things together again.its been awhile
@@semoranman13 Yeah, you can add or subtract one of those in the bottom of the top bar above the spring, to get the top bar to the proper height you need to fit it in.
between looking back at the directions and following you and made it a little bit more simple I still had a couple questions like I had more pieces and I used I didn't understand what number f what was for even? But thanks for getting me to the end.
These instructions are pretty confusing too. The camera angle is bad so I can really see what you are doing. It looks like it helped others so maybe one day I’ll be able to install this.
Thanks for the video I have the same one from Walmart and I could not figure out putting it together at all' the instructions it comes with is horrible doesn't help at all 😁 thanks 👍🏽
Dude, you just saved me so much time fighting with this thing. Thank you
S always
I agree lol
This thing was a fight to do
Righttttt
Hey Michael - I almost gave up after trying to decipher the instructions. Then decided to check on UA-cam. Thanks for your help! 😀
Me too. I couldn't believe there is actually a video. I'm glad, because, even though I'm a relatively intelligent guy, these instructions were not only mystifying, but also completely wrong! Thanks to Michael, I got it right. UA-cam Rocks!
Yeah. I'm a diesel mechanic and I was lost. My wife was killing me about it. Ty young man
2 years later and one would think that they would improve their instructions but, no.
So thank you for your helpful video!! Smart kid!!
I still can't figure it out even with this video...I think I'm just old lol. Next time can you be in front of your camera and show the pieces up close to the camera. I appreciate you doing this. Thank you young man 👍
Me 2 🤷🏿♀️
I had to watch 3 videos and read instructions and like 3 hrs later I got it hha
Me neither
THANK YOU!!
SPENT HOURS AND DAYS TILL I FOUND YOU ON UA-cam. THEY NEED TO HIRE YOU TO REDO INSTRUCTIONS! 😉
Thanks buddy!!! I ordered one from Amazon. It’s the same structure but, a different brand. It came w/ no instruction. You did a great job constructing & explaining. ✨Appreciate it!✨
Wow... you explained it perfectly! I was so close in returning mine but thanks to this video I was able to put together and use it. Thank you so much
If you ever come back and read the comments on this video.. thanks dude it was very helpful
Box : No tools needed!
Also , Inside Box : You'll need ;
Right
Without this video that caddy would have been tossed into the garbage! You saved me from a lot of tears and frustrations!
Thank you...your parents are so lucky to have you to help them...Your video is extremely helpful...
Thank you young man I was about to break out the hacksaw but you saved the day.
Thank god I found this kids video! Well done; i spent TWO hours before i found this kid. Instructions are crap; the device is fine. Get it together ZENNA!!!
Thank you so much Michael! You are a life savor brother! I seriously couldn’t figure out those written directions to save my life lol! 😂
Thank you so much I was about to take it back to the store
Ha ha ha!!!!
I was so there!!!!
Thank you very much for your video. I was able to not throw this away out of frustration. After trying for 1/2 hour and read I don’t know how many times the stupid instruction I was able to do it :). 👍🏻
I had the parts out all morning and the instructions made absolutely no sense. Now that you've shown me I had it together and organized in my bathroom in about 10 minutes-thank you!
THANK YOU, THANK YOU, THANK YOU!!! it's 2021 and the instructions seem to be the same....CONFUSING!! Thanks, again, Michael, great job explaining this.
5 years later and still awful instructions!! Thank you!
This Young Man is amazing. Good job mom & dad! The instructions on this shower caddy sucked. He helped me out alot ty!
“It works for our family and if it doesn’t work for you...I’m sorry.” 😆 👍🏼 I found this tutorial both entertaining and helpful! Ty
Thanks young man...your are entirely correct..the instructions are junk...but you saved the day ..keep up the great work
Very good young man very well spoken and I definitely appreciate you because I was about to take this product back to the store and saw your video and now it is up in my bathroom thanks to you...
Thank you for making this so simple I was crying inside before I found your video
Thank you, i really can’t understand that instruction paper they put in. Glad to watch your video. Keep it up!
Thank you.... thank you.... thank you....you made this so much easier
You're awesome ❤✌God bless you for helping me and other people.
Thank you so so much! You have no idea how much time you saved me! God bless you!
Just as I was about to throw it against the wall... Your video saved the day, (and my wall) LOL!
You saved the day. I was so close to trashing this thing since I lost my receipt to exchange it.
Thank you Michael. :D I bought the plastic one. All I needed was to discard one of the B tubes as well.
They updated the design. It's 1/15/2022 and I just put this together in a few minutes and the directions were helpful.
You young man, are a life saver.
OMG I just bought one of these four-shelf jobs from Home Depot, it cost me like $35 and doesn't even really have a locking top spring top bar assembly. You can adjust for height,
of course, but the top spring and stays just kind of float inside the top bars, so you have to kind of pull the bar down on springs to clear the ceiling as you place the whole thing,
instead of cranking the top bar in place to the spring assembly so it locks, as in some of these models. Ah well. It took me like 45 minutes of screwing with it and rereading
the instructions to finish it. It did stay in, and looks pretty good thus far. I thought I'd bought a locking-spring-bar model, but I guess that one was like $125 at Home Depot.
The best laid plans.....anyway, your video makes it a lot clearer. The problem with this model is if you lose grip on the top bar, you could have it slam into something and
damage drywall or some other materials that are in the way. The locking one is a lot more foolproof.
My shower curtain fell down and hit me on the head 😂😂😂😡....this was after getting a ladder and determined that was a bad idea. Still isn't up.
@@brandynicole1910 Oof! Not good. I managed to install this thing two years ago and it hasn't moved since! Thank God. i also got a new curtain and liner recently and that was a good investment as well. I had some handyman install a curved shower curtain rod two years ago also, moving into a rental house, because I was having trouble drilling for some reason into the bath wall, and I didn't have the patience. It should have been an easy job, but wasn't.
Figured it out without your instructions but thanks for trying to help ppl out.
You should upload more videos. This was very helpful!
Thank you!!!!! I took mine apart and couldn’t remember how to put it back together lol
Thank you...your instructions were CLEAR'
Thank you! A few more hints: the white caps that go with the spring are placed INSIDE the top and bottom of the tube containing it. Also, you may not need all the black tubes that go on top of the spring. If the caddy is too tall for your tub, try taking one or two out.
Would the black things above the spring have to do with why ours is not going directly up the wall? It kind of bends out liek if theres too much tension
Works great for holding phone for watching videos while showering
First the negatives: 1) volume was so low I had to run my volume control to the max. 2) but you muttered and I was unable to understand you even (I'm an old man) at full volume but my wife was. 3) When you began assembly you positioned yourself with your back to the camera blocking a view of the tubes -- you should have sat on the far side of the tubes so it was easy to see what you were doing. 4) The camera shaking the entire time was unnerving.
Now the positives: We had thrown it in the trash, but I found this video, dug all the parts out of the trash and, using your video, made it work. Thank you very much.
Now some tips for others: Opening means the distance from the ceiling to where the bottom of the pole will rest. Tapered tube means a straight tube with a tapered end. Tube D is 19 inches long with a tapered end. Tubes A & B are used for all assemblies. For a 60 inch opening you add only tube D. 62 - 67 1/2 inch openings only require tube C. 71 1/2 - 81 1/2 inch openings use both tubes C & E. Above that use all tubes.
You must determine how many spacers (the black things) are needed for your opening. Our opening was 69 inches and needed no spacers.
Thanks again
jim
Bruhhh are you Siskel or Ebert?? Over here over Annaliseing a UA-cam instruction video. Go back to film school 🤓
THANK YOU 🙏🏼 I was ready to scream!!!!!!!!
I still can’t put mine together after having it for a month already.
Dude. You saved me such a headache!
Perfect! I have a different once but the concept is the same. Thanks dawg keep it up!
Life saver! Thank you so much!
Thank you, you made this so easy to understand. You're AWESOME 😎
Great job!
Yes, the instructions are horrible, which is why I came here.
The instructions also don't mention the spacer inserts, which are plastic, and required, if you want it to fit in a higher ceiling situation.
Anyway, thank you, you also saved me time.
😂 correction, part F, no picture, initially, but part F. 😂 had to use all three.
The installation procedure isn’t really difficult, I think I had it four minutes into the video, but without those four minutes, I’d still be yelling at it!!
Good job!!!
Thanks so much saved me a trip back to walmart
I literally came here for the tape strips part & u didn't use them 😩😩😩😩
Did you figure it out? I was thinking the tape strips were meant to put on the wedges? I don’t know
Thanks Pal. I finally got it, thanks to you!
Thanks I really needed that help
My Friend thanks I was going to have a divorce until your video
You rock dude! Lol thanks for making this vid.
Helpful we need to make ours 71 inches for bathtub👍👍👍
THANK YOUUU UUGGHHH IT WAS SO FRUSTRATING TO READ THAT DAMN SORRY INSTRUCTIONS LOL
Thanks dude for ur help this video helps me a lot God Bless you
Thank you for those simple instructions!
Mine is missing the skinny tube that goes on top of the spring. All of the tubes are literally the same width. I am soooo frustrated!
Im trying to figure out the spring part it keeps falling down it won’t lock
You saved the day
"So, I thought I would give it a try while he walked away and thought about it..."
LMAO
We all know what that meant. He stormed off and made a sacrifice to Satan.
I just threw mine back in the car and said “this piece of shit can go back to Walmart!”
Lol
Good job helped me install mine
Wow i wish i watched you,i made a mess out of mine,cracked one shelf,and it says to fit mine i have to cut half off a bar ,How in the world am i supposed to cut a bar ? I dont have tools for that! Anyway you are a smart kid,sorry young man,Mines wobbly. The other bar was way to long ,without it its wobbly. Im going to give wayfair i talking too tomorrow for sure. I wish you were my grandson ,i would be asking you to come put my stuff together for me.great young man to do that for your dad.take care,keep up the good work.i subscribed i want to watch more,maybe ill learn how to put things together again.its been awhile
Thank you young man!!!
100% right and the sloppy instructions. The writing is kinda small to, Ive been having a hard time reading everything.
Thank you for the video and Love your shirt!
What about the 3 black spacers? very confused?
I believe those are to fine tune the height so you don't have to cut a section. I used one of them for that purpose and it seems to be working.
@@semoranman13 Yeah, you can add or subtract one of those in the bottom of the top bar above the spring, to get the top bar to the proper height you need to fit it in.
The spring keeps falling to the bottom of the assembly. How can I keep at the top?
Thank you so much! This really helped A LOT!!! 🥰💜🙏🏽🤠
Thank you so much. It was so confusing
between looking back at the directions and following you and made it a little bit more simple I still had a couple questions like I had more pieces and I used I didn't understand what number f what was for even? But thanks for getting me to the end.
Michael that was so helpful
Best thing about this video is that he decided to wear a tuxedo
You did and awesome job. Thank you.
Just got one... why is the top part so wobbly? I will keep trying.. so frustrated.
Is it suppose to be sturdy? Mines is kind of floppy. 😕
Thanks! Almost threw it out the window
Why is this so f hard to put together 🤣🤣🤣🤣
Thank you so much I was so confused
Totally. ❤Thank you.
You are a hero. Thank you very much
smart kid!!!
Thanks for sharing this video was about to return it...
These instructions are pretty confusing too. The camera angle is bad so I can really see what you are doing. It looks like it helped others so maybe one day I’ll be able to install this.
This helped. Thank you!
thank you so much 💓....
Great job man
Thanks for the video I have the same one from Walmart and I could not figure out putting it together at all' the instructions it comes with is horrible doesn't help at all 😁 thanks 👍🏽
Thanks buddy.
My problem are these little cylindrical spacers it came with...it doesn't explain their purpose and they seem unnecessary.
Ineffable Splendor how did you use the spacers? I can’t figure out where to put them
Thank you!!!! Very useful
Thanks man I almost threw this shit in the trash lol
Mine didn’t come with a 1/2 pole?
Simply. Thank YOU
Thanks for the help!
That was awesome thank you....
THANKS really helped!
thanks for the vid
Very good video 👍