Tuning Toyota PickUp Carburetor.

Поділитися
Вставка
  • Опубліковано 14 лис 2016
  • A quick how to for Tuning your basic Toyota Pickup Carb.

КОМЕНТАРІ • 64

  • @mrjoshhimself81
    @mrjoshhimself81 3 роки тому +6

    What this dude fails to mention, is that the mixture screw is covered by a metal cap that has to be drilled out in order to get to the screw. Perhaps a more detailed explanation would be better rather than giving these folks false hope, but I digress.

  • @shobud7561
    @shobud7561 5 років тому +7

    The misfire has nothing to do with the carb. Most likely it in the distributor, wiring , or spark advance . A good tune up would be a good starting point...

  • @dunewell2173
    @dunewell2173 5 років тому +2

    Hi guys i have a 94 toyota hilux and i pulled the carburetor harness off and its still running does anyone knows why?

  • @kevent1823
    @kevent1823 9 годин тому

    I want to correct what he said abut the air-fuel mixture adjustment screw. What he said in the video when you screw it clockwise "in" is leaned, that is not true, in fact that is rich because that screw control the air volume only, fuel was not effected by that adjustment screw, unlike many other carburetors that screw control both air and fuel at the same time that is why it was called " air-fuel mixture's crew.

  • @lordshiga9482
    @lordshiga9482 5 років тому +5

    What is that directly above the mixture screw?

  • @kylefuhrman1736
    @kylefuhrman1736 2 роки тому +7

    has to be the best short and to the point video on this carburetor. Thank you!

  • @davidregan9872
    @davidregan9872 7 років тому +3

    Josh, What would make a 22r carb misfire, and not stay running. Could it be the AAP Diaphragm cause that, or the float. I have almost 300,000 mi. Thanks

  • @mazen723
    @mazen723 4 роки тому +3

    Nice video, even though it was short. I have the same carburetor,and my engine stalls , unless I turn that middle screw to a high 1600 rpm. The air,fuel mixing screw, has no effect , what so ever , any idea why ,please . Do I have to take the carburetor a part and clean it to thoroughly

  • @steadygrindin6053
    @steadygrindin6053 4 роки тому +1

    87 Toyota pickup 22r 4wd new parts,engine, carb,fuel pump,and distributor. Runs good and accelerates fine until i shift into 4th and seems to lose power not sure what it could be any would be appreciated

  • @pedritoc.c.t.665
    @pedritoc.c.t.665 3 роки тому

    I have a question my carb is burning lot gas . ecxaust is black "smog black" on rull trothle 60 to 70 mph no power it soumd like is going then like it needs more aair or something . what it could hbe

  • @eggowaffles4672
    @eggowaffles4672 2 роки тому +3

    Awesome explanation, short and sweet 👍

  • @danpearson9355
    @danpearson9355 4 роки тому +1

    Thank you for simple explanation..

  • @yourcaseworker6916
    @yourcaseworker6916 4 роки тому +1

    QUESTION

  • @radhelvasquez6582
    @radhelvasquez6582 3 роки тому +1

    buenas hasta donde es el nivel de gasolina del ese carburador gracias

  • @force24t
    @force24t 3 роки тому +2

    Hi josh ,

  • @lindaleehulsey3167
    @lindaleehulsey3167 Рік тому

    Throttle screw off to left under thermostat adjustment what does it do?

  • @YakoHansen
    @YakoHansen Рік тому

    What about adjusting the choke?

  • @alexandrosARTS
    @alexandrosARTS 4 роки тому

    El cable rojo se me despegó alguien sabe como ponerlo de nuevo???

  • @DirtKingsOffroad
    @DirtKingsOffroad 3 роки тому

    I can’t find your page i have a misfiring problem after driving through a puddle i replaced the spark plugs, wires, dizz cap, rotor didn’t change a thing trows black smoke and small really bad

  • @AleGuevara17
    @AleGuevara17 2 роки тому

    Amigo mi carburador es bastante igual al suyo , pero el mio donde esta el tornillo que regula la mezcla de aire esta bloqueado ! ,