This is a dumb question but you have to change the motors if you're upping the battery to increase the speed correct? Also if you're upping the battery can you link the battery you purchased? Do I need to do anything different with the battery install for the updated 20AH hour or whatever it is?
I think I have the battery link in the comments somewhere. But any on sale universal 12-volt batteries from Amazon will work. Just find the highest amp hour you can. If you are upgrading the voltage as well, it would be wise to upgrade the motors as well. Check out ML toys they have upgrade motors for this specific vehicle.
What would cause machine to go faster in reverse then forward. I've replaced wiring harness, pedal, gear shifter, and battery which didn't fully charge it at first. Having it charging now though.
I was looking at this one- can you help with - what size height age of kid can still fit in it without smashing their knees? We outgrew a peg perego gator. Thanks!
My 11 - and 5 year old ride around in it perfect. I'd say the 11 year old is at the edge. I'd say any kid over 4 and a half feet would want something different
My son has the same one and today it just will not move. The motor works though when you step on the gas and it is fully charged. So I am thinking the gears just became stripped? How gear boxes does this thing have? Should I be checking every tire or just one?
There is 2 gear boxes. I believe I have a link to the ebay ones I got in the discription or in a comment somewhere here. They might not be available from the exact seller but just search like items. Should be about $40-$70 for the entire gear box with motor. The price fluctuates alot.
@@igolfandimakestuff2629 Thank you! I will check it out. The motors are still working so would you think I just need the gears? I am reading a lot of comments about how the wires are not the same for the "new motor" and I have no solder gun. gear boxes are on the back tires i take it?
The gears get stripped out really easy when the kids ride around the land alot. So I just wanted to get a bit better motors in it and start printing my own gears so I don't need to buy an entire gearbox every time one breaks
@@igolfandimakestuff2629 this is good to know! Ours was still under warranty, so they are sending me new parts. We’re hoping that what they send us is what is the problem. The back left tire doesn’t spin. Do you sale your gear things you print? I don’t have a 3D printer….
I would assume it's the same gear that was stripped out in mine. Getting the entire gearbox with motor is fairly cheap. I think I linked the gear box in my video. And it's easy to fix if your just doing the gearbox swap
So my car quit running. The lights and noise still come on when i charge the battery it automatically turns green on the charger like its charged but when i hit the oedal it does nothing. Anyone else had this problem?
@bm3211 Yes, the noise comes from 2 aa batteries in the stearing wheel. And lights require so little power to work so they could still be on while the battery does not have enough juice to move the car
Great work! I found your video looking to fix with my own 3D printer. Ours is the 3rd gear, though. I will be modeling it to print tonight.
Nice. Make sure you print in carbon fiber nylon. All other materials will fall apart right away. Maybe just maybe ABS would work.
I have a friend who has all four gears damages, if you could send the file I would appreciate it
Stupid question but do I need to up the motors if I am upping the battery to get increased speed? Also what battery do you recommend
This is a dumb question but you have to change the motors if you're upping the battery to increase the speed correct? Also if you're upping the battery can you link the battery you purchased? Do I need to do anything different with the battery install for the updated 20AH hour or whatever it is?
I think I have the battery link in the comments somewhere. But any on sale universal 12-volt batteries from Amazon will work. Just find the highest amp hour you can. If you are upgrading the voltage as well, it would be wise to upgrade the motors as well. Check out ML toys they have upgrade motors for this specific vehicle.
What would cause machine to go faster in reverse then forward. I've replaced wiring harness, pedal, gear shifter, and battery which didn't fully charge it at first. Having it charging now though.
Maybe something in the wiring harnesses. A reverse wire must be hooked up to a FW connection?. Like the FW and rev. Wiring should be swapped.
I was looking at this one- can you help with - what size height age of kid can still fit in it without smashing their knees? We outgrew a peg perego gator. Thanks!
My 11 - and 5 year old ride around in it perfect. I'd say the 11 year old is at the edge. I'd say any kid over 4 and a half feet would want something different
@@igolfandimakestuff2629 thanks!
My son has the same one and today it just will not move. The motor works though when you step on the gas and it is fully charged. So I am thinking the gears just became stripped? How gear boxes does this thing have? Should I be checking every tire or just one?
There is 2 gear boxes. I believe I have a link to the ebay ones I got in the discription or in a comment somewhere here. They might not be available from the exact seller but just search like items. Should be about $40-$70 for the entire gear box with motor. The price fluctuates alot.
@@igolfandimakestuff2629 Thank you! I will check it out. The motors are still working so would you think I just need the gears? I am reading a lot of comments about how the wires are not the same for the "new motor" and I have no solder gun. gear boxes are on the back tires i take it?
For some reason, all the gearboxes I have found come with a motor. If yours still work, just remove the motor and save the new one
Yes gear boxes are on the back
do you have files for all 4 gears, I have a buddy who has damage on all four gears, he wants me to 3d print for him
Keep an eye out here I think I will have to upload new files and tweak this existing one
www.printables.com/model/477244-24v-ride-on-gear
The gear your printing out,is it the 10tooth/54tooth one?
I print all of them. But yea, the 10/54 is one I have that works well.
@@igolfandimakestuff2629 do you have a link I can buy one from ya?
www.bacustomproducts.com/store
Just go to the main page and scroll down and click on the picture of the ride on. Not sure why it linked just the store. And not the gear part's
Ok awesome I wana buy the small gear I think it's called in the gear box...its the one that's a 10tooth/54tooth for realtree utv 24v
What made you do this video? What wasn’t working properly?
The gears get stripped out really easy when the kids ride around the land alot. So I just wanted to get a bit better motors in it and start printing my own gears so I don't need to buy an entire gearbox every time one breaks
@@igolfandimakestuff2629 this is good to know! Ours was still under warranty, so they are sending me new parts. We’re hoping that what they send us is what is the problem. The back left tire doesn’t spin.
Do you sale your gear things you print? I don’t have a 3D printer….
I would assume it's the same gear that was stripped out in mine. Getting the entire gearbox with motor is fairly cheap. I think I linked the gear box in my video. And it's easy to fix if your just doing the gearbox swap
So my car quit running. The lights and noise still come on when i charge the battery it automatically turns green on the charger like its charged but when i hit the oedal it does nothing. Anyone else had this problem?
It's very likely you need a new battery.
@igolfandimakestuff2629 I thought that too but would the noise and lights still come on?
@bm3211 Yes, the noise comes from 2 aa batteries in the stearing wheel. And lights require so little power to work so they could still be on while the battery does not have enough juice to move the car
@@igolfandimakestuff2629 okay. Would you recommend ordering 2 12v?
@@igolfandimakestuff2629
Mine does the same tried swapping the battery to a 20v Drill battery but still doesnt move what do you think it might be TIA!
Can I purchase gears from you?
How did you get the back wheel off? The nut keeps spinning around without losing up.
You need to hold the entire shaft and that will allow you to take the nut off.
Yes I am working on making them stronger and stronger but I do have 2 more available now of the small gears. That should work