Yeah I agree. Got a UK crx with a d16a9 which is the same engine. Car weighs under 2000 lbs from the factory and it pulls pretty well. Will probably raise the compression a little with a head skim in the future and do full bolt ons. Should be decent enough.
Here brother i got a 91 with a d16a1 zc but the ting with 2 cables that is under the distributor at the other cam its not conected you got any idea were tha goes and what is for? Tanks you will help me alot if you could encerd my quiestion.
Hey I'm building a 90 crx si and have the dohc zc16 as well and for some reason the crx si driver side axle I bought for my car is about a quarter inch too short if you know anything please let me know
i love the look of the zc, its sort of innocent in a way with 130 hp, dohc, no vtec but was still a little sporty engine, simple things are awesome
Yeah I agree. Got a UK crx with a d16a9 which is the same engine. Car weighs under 2000 lbs from the factory and it pulls pretty well. Will probably raise the compression a little with a head skim in the future and do full bolt ons. Should be decent enough.
Here brother i got a 91 with a d16a1 zc but the ting with 2 cables that is under the distributor at the other cam its not conected you got any idea were tha goes and what is for? Tanks you will help me alot if you could encerd my quiestion.
This is the exhaust camshaft position sensor, the wires from it go to the brain. The brain and braid should be from d16a9.
You don’t have to connect this sensor; the engine will run without it.

What harness did you use?
Hey I'm building a 90 crx si and have the dohc zc16 as well and for some reason the crx si driver side axle I bought for my car is about a quarter inch too short if you know anything please let me know
Hey can you help my son put wireharness on honda civic if we video chat or tell us if any of these harnesses will work on his motor
Update? Did they refund the money for the incorrect parts?
Hey i put a d16a8 in a 88 dx civic and need a little help on the dizzy wiring to the B clip for the mpfi Im also curious about the c1 and c2
What transmission did you use
Yes! They made everything right
What ECU did you use?
What do I need for this swap
Do you know what oil pan gasket to use?
Looj Chang
Like and subscribe !!
Thanks
Why didn’t you just reuse your SI tranny and axles?
you don't even need the dashpot
Robin
Yea I know. But I paid for it
I understand, but it looks cleaner without it. Just put a vacuum cap on it.
Robin
Your right
Thanks for the watch