Always the best. Was just trying to compare the T7 (as it’s a lightning deal right now) and the MA5 (which you recommended for the BMPCC6k), and I trust your word completely, so this helps a lot. Thanks, Tom.
Hi Tom, I just bought a FW568 monitor and am starting to learn how to use False Color for exposure. If I'm using an 18% grey card, where should that fall on the false color spectrum?
I have been using a Feelworld F7S for about six months and have been super impressed with it. We also have a Small HD AC7 and an Ikan VK7i but we much prefer the Feelworld F7S. The Feelworld F7S has an excellent full HD (1920x1200) IPS screen, great features at a great price.
I've got the Feelworld T7 and it was definitely worth the money. I dropped it on accident from about 6 ft up and it survived with only a couple scuffs on the side.
I realize this video is over a year old now. I am looking for a monitor to use with my GH5. I am stuck between the two sizes. The bigger one and brighter one will help a lot when outside, but the smaller one would be better for travel and gimbal work.
I have the 279 model and it very bright but the battery life isn’t great. It goes from 100 to 80 then 60 and 40 then off. It shows 20% at a time. I only use mine for looking at my pictures after taking them. I don’t have the monitor on all the time. ❤❤❤
Yup that's what I use now on one of my URSA Mini cameras too... I was considering getting another iKan but then i tried this and it's great... very bright!
@@weshootfilms try reducing the brightness or luminance on the monitor. I never have to go above 80. normally i keep it on 40. it works well indoors on that. outdoors I've only had it as high as 80. it does get warm. but not as hot as factory defaults
Hi, I do not expect you tried every model but I'd like to ask a question: which significant characteristics do distinguish MA5 from FW568? Thank you anyway.
Your video title is misleading. To retain credibility with your viewers you may want to avoid using click baits. In the long run, it'll hurt you. There isn't any monitor here that is $100, as you promoted in your video title. Just my 2 cents.
Only one of them is 40 dollars above the 300 dollar mark. This ain't clickbait at all. Don't understand why people can't be thankful for receiving free information...
@@bobbydbuze you're off point. This has nothing to do with being ungrateful or vice versa. It's simply advice to refrain from inaccurate video labelling, to avoid loosing credibility. You're making a bowl of cereal out of one corn flake. Calm down.
For your moza air2 setup, you definitely need this mounting ring : ua-cam.com/video/WLbF3ccyFb8/v-deo.html It will fit above the joystick + display and has many mounting options for handles and monitors! I use the feelworld ma5 on a handle on this ring, in super-convenient underslung mode, monitor on top!
Hi Tom, with the intention of using it some outside with a bmpcc 4k - how does the 7" 2200nit monitor compare to the andycine (a6) that you used before? I find the size of the Feelworld f6 (plus) which is the new version of the same screen (andycine a6) with touch options attractive - I wonder if the 7" will feel cumbersome compared to the 5" of the other FW but one would need a hood and the other doesn't. Seeing as you basically have used both - how does the andycine a6 / fw f6 seem to you now?
I´ve got the small one and I like it on my gimbal setup. The battery-life with a medium NPF-battery lasts about two days. What about the bright version? Does it eat batteries like hell?
I hope they develop the field recorder monitor I suggested to them . I use the T7 all the time . Not the sharpest image and the colour representation is awful . but it is tough , light weight and a damn decent bit of kit for the price . Feelworld have a great range for budget film makers at the right price . Great review
Hi Tom!! I have a question about the feelworld Ma5. I find the simultaneous monitoring on the 5D mk4 refuses to work with the Ma5. Does anyone have similar problems or have any idea what might cause it? Footage appears on either the screen or external screen but wont display on both at the same time. Is there a setting to fix this?
The screen of the Black Magic it's still on when you connect the monitor! It's a feature of the camera or you have to do something special? Because on my Canon 6D and 6DII the monitor of the camera turn off in the momento you connect the Feel World! Thank you!
Thanks for a nice review, Tom. I initially bought an Atomos Shogun Inferno recorder from B&H with power pack and a 2TB SSD, after I was told by the salesperson that I could record 4k 60 fps to this recorder, using my Canon 1Dx mark ii. Long story short, he was dead wrong, and as I found out, my camera doesn't even output ANY 4k signal, so I am hoping you would be able to help me answer a single question (since I am a brand new kid on the block when it comes to external monitors/recorders). Since I am shooting my videos with Canon 1Dx mark ii, and I like my footage in 4k 60 fps, and since I can't externally record 4k 60 fps using this camera, the next best thing is to make the internal recording with 4k 60 fps, and here is my question... If I am recording internally 4k 60 fps on my 1Dx ii, do I need a monitor that's capable of displaying 4k 60 fps? In other words, if I purchase a monitor that (for example) is only capable of displaying 4k 30 fps, (or even is only capable of displaying 1080 60 fps), would I still be able to make the internal 4k 60 fps recording, while monitoring the recording in progress on an external monitor for focus, and overall image analysis? Thank you.
The monitor will not affect how the camera records internally. Inost cases when cameras record 60fps in 4k they still output only a 30fps signal and I'm pretty sure the 1dx outputs in 1080p 30fps which is what you will see on your external monitor and what is all you need to be able to pull focus
@@SergeLetunovskiy You are wasting money on a monitor for $800 .but if you are looking for a monitor = BM video assist ua-cam.com/video/eqBLjhrKu4c/v-deo.html
Hey Tom. Wanted to know if you still happy with Moza Air 2? I want to get one but those idiots took out the case and the ifocus from original package now it's hard to justify the price for what you get and there're many people complaining about quality and gimbal unable to keep the horizon in compare to ronin s, zhiyun... . thanks man
I've been using the F570 now for around six months and it's an excellent monitor. I'm hoping that Feelworld bring out the exact same design in a 2200 nits version, as that would be the icing on the cake. I also like the fact that the inputs/outputs on the F570 are on the bottom of the monitor, as they are then out of the way on my rig. If they were on the side, they'd always be vulnerable to damage or disconnection.
The major difference is size, 5" vs 5.7" and the input/output sockets are in a different position (sides), plus a few other design differences. But I think it's now a superseded model as Feelworld doesn't list it anymore.
@@TomAntos Likewise. I was looking to get a larger Feelword Monitor for a client Video Village. Something around 24 inches. Do you recommend one for that size? Thanks Tom!
If they make a 6" with the 2000 nits and pop in a good waveform...I'm in! :) I want the FW279S in the meantime. Just a bit too big and lacking a waveform. But the price for the HDMI only one is very attractive. 5" and dull is just no better than the P4K's screen, really.
@tom Antos Bought the 7 inch with just the hdmi but it gets very hot within an hour of use. does this happen to anyone else or is mine a defect wondering if I got a bad one.
I have the SDI version of the 7 inch, been using it all day long for shoots but doesn't get hot. I mean it heats up, but nothing unbearable. Had it for about 3 months now.
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Any updates on a budget friendly monitors for 2021?
Always the best. Was just trying to compare the T7 (as it’s a lightning deal right now) and the MA5 (which you recommended for the BMPCC6k), and I trust your word completely, so this helps a lot. Thanks, Tom.
Hi Tom, I just bought a FW568 monitor and am starting to learn how to use False Color for exposure. If I'm using an 18% grey card, where should that fall on the false color spectrum?
I have been using a Feelworld F7S for about six months and have been super impressed with it. We also have a Small HD AC7 and an Ikan VK7i but we much prefer the Feelworld F7S. The Feelworld F7S has an excellent full HD (1920x1200) IPS screen, great features at a great price.
I've got the Feelworld T7 and it was definitely worth the money. I dropped it on accident from about 6 ft up and it survived with only a couple scuffs on the side.
Does our get hot mine gets very hot i have the 7 inch hdmi version and within 30 min gets hot I understand that its bright but is this normal.
@@weshootfilms I guess it's normal ... my one gets a little hot too.
I realize this video is over a year old now. I am looking for a monitor to use with my GH5. I am stuck between the two sizes. The bigger one and brighter one will help a lot when outside, but the smaller one would be better for travel and gimbal work.
I have the 279 model and it very bright but the battery life isn’t great. It goes from 100 to 80 then 60 and 40 then off. It shows 20% at a time. I only use mine for looking at my pictures after taking them. I don’t have the monitor on all the time. ❤❤❤
I bought the fw279s and love it for my ursa. I almost got the ikan you had on your last video. glad I waited for this one. oooommmmgggg
Yup that's what I use now on one of my URSA Mini cameras too... I was considering getting another iKan but then i tried this and it's great... very bright!
@@TomAntos I just contacted them about there broadcast monitor. I wanna try it out on set .
Really trying to find out if mine is bad it gets very hot within 30 min does this happen to you at all.
@@weshootfilms try reducing the brightness or luminance on the monitor. I never have to go above 80. normally i keep it on 40. it works well indoors on that. outdoors I've only had it as high as 80. it does get warm. but not as hot as factory defaults
Great video Tom, as always. Can you post a link to the monitor arm 2:27? Thanks
I have the 5 inch but when I press record the screen goes black and days it is recording
I bought the MA5 , just perfect for my Moza gimbal.
Copped the T7 thanks to you.
Hope that commission finds you well, my friend!
Always grateful when you can use my links. Thanks! Also let me know what you think of the T7 after you used it for a while.
Hi, I do not expect you tried every model but I'd like to ask a question: which significant characteristics do distinguish MA5 from FW568? Thank you anyway.
Your video title is misleading. To retain credibility with your viewers you may want to avoid using click baits. In the long run, it'll hurt you.
There isn't any monitor here that is $100, as you promoted in your video title.
Just my 2 cents.
Only one of them is 40 dollars above the 300 dollar mark. This ain't clickbait at all. Don't understand why people can't be thankful for receiving free information...
@@bobbydbuze think he is saying that the 100 dollar price point is incorrect.
Projectlink. me Fair enough...
@@bobbydbuze you're off point. This has nothing to do with being ungrateful or vice versa.
It's simply advice to refrain from inaccurate video labelling, to avoid loosing credibility. You're making a bowl of cereal out of one corn flake. Calm down.
For your moza air2 setup, you definitely need this mounting ring : ua-cam.com/video/WLbF3ccyFb8/v-deo.html
It will fit above the joystick + display and has many mounting options for handles and monitors!
I use the feelworld ma5 on a handle on this ring, in super-convenient underslung mode, monitor on top!
Hi Tom. Is there any monitor from Feelworld that indicate recording with a red frame on the screen?
Not that I know of. Sorry.
Hi Tom, with the intention of using it some outside with a bmpcc 4k - how does the 7" 2200nit monitor compare to the andycine (a6) that you used before? I find the size of the Feelworld f6 (plus) which is the new version of the same screen (andycine a6) with touch options attractive - I wonder if the 7" will feel cumbersome compared to the 5" of the other FW but one would need a hood and the other doesn't. Seeing as you basically have used both - how does the andycine a6 / fw f6 seem to you now?
Great info. This is something I have been considering for my gh4. Looking at the small screen can be annoying at times.
I´ve got the small one and I like it on my gimbal setup. The battery-life with a medium NPF-battery lasts about two days. What about the bright version? Does it eat batteries like hell?
Hi Tom! Will be nice if you make a tutorial of how to use a monitor with Black Magic Pocket 4k. Your best setups, etc... Thanks
the 279 does the job it supposed to
i cant afford the ninja's so the 279 does all the wedding work i heed to do
How do you get the monitor on the camera and external monitor to play at same time because when I hook external monitor the camera screen goes out.
I hope they develop the field recorder monitor I suggested to them . I use the T7 all the time . Not the sharpest image and the colour representation is awful . but it is tough , light weight and a damn decent bit of kit for the price . Feelworld have a great range for budget film makers at the right price . Great review
Hi Tom!! I have a question about the feelworld Ma5. I find the simultaneous monitoring on the 5D mk4 refuses to work with the Ma5. Does anyone have similar problems or have any idea what might cause it? Footage appears on either the screen or external screen but wont display on both at the same time. Is there a setting to fix this?
Do these have anamorphic de-squeeze? Also, can you power the monitor from the Moza air 2?
Which monitor are you using. Still the andycine or a feelworld monitor?
Wanted to buy the feelworld ma5 a Long time. But i Miss some things.
So
I think im gonna save up for the Atomos Shinobi
Can these work with DSLR Canon 520 and up?
I use the 5.7 andycine which I think are the same company and it works for me.
Check out the PortKeys LH5T as well
What is the range of zebra ion these 3 monitors. Do they go to 40%?
The screen of the Black Magic it's still on when you connect the monitor! It's a feature of the camera or you have to do something special?
Because on my Canon 6D and 6DII the monitor of the camera turn off in the momento you connect the Feel World!
Thank you!
It's a feature of the camera. Some cameras won't allow you to have both on at the same time :/
Thanks for a nice review, Tom. I initially bought an Atomos Shogun Inferno recorder from B&H with power pack and a 2TB SSD, after I was told by the salesperson that I could record 4k 60 fps to this recorder, using my Canon 1Dx mark ii. Long story short, he was dead wrong, and as I found out, my camera doesn't even output ANY 4k signal, so I am hoping you would be able to help me answer a single question (since I am a brand new kid on the block when it comes to external monitors/recorders).
Since I am shooting my videos with Canon 1Dx mark ii, and I like my footage in 4k 60 fps, and since I can't externally record 4k 60 fps using this camera, the next best thing is to make the internal recording with 4k 60 fps, and here is my question...
If I am recording internally 4k 60 fps on my 1Dx ii, do I need a monitor that's capable of displaying 4k 60 fps?
In other words, if I purchase a monitor that (for example) is only capable of displaying 4k 30 fps, (or even is only capable of displaying 1080 60 fps), would I still be able to make the internal 4k 60 fps recording, while monitoring the recording in progress on an external monitor for focus, and overall image analysis? Thank you.
The monitor will not affect how the camera records internally. Inost cases when cameras record 60fps in 4k they still output only a 30fps signal and I'm pretty sure the 1dx outputs in 1080p 30fps which is what you will see on your external monitor and what is all you need to be able to pull focus
Tom Antos awesome! Thank you so much!!! 😊
Tom Antos in your opinion, what is the best monitor currently on the market around $800? (Since I don’t need it for recording, only monitoring)...
@@SergeLetunovskiy You are wasting money on a monitor for $800 .but if you are looking for a monitor = BM video assist ua-cam.com/video/eqBLjhrKu4c/v-deo.html
B.L Thackrey thank you so much Tom, I will definitely check it out.
Hey Tom. Wanted to know if you still happy with Moza Air 2?
I want to get one but those idiots took out the case and the ifocus from original package now it's hard to justify the price for what you get and there're many people complaining about quality and gimbal unable to keep the horizon in compare to ronin s, zhiyun... . thanks man
I just used the Moza Air 2 today for another shoot. Definitely my favorite right now
I've been using the F570 now for around six months and it's an excellent monitor. I'm hoping that Feelworld bring out the exact same design in a 2200 nits version, as that would be the icing on the cake. I also like the fact that the inputs/outputs on the F570 are on the bottom of the monitor, as they are then out of the way on my rig. If they were on the side, they'd always be vulnerable to damage or disconnection.
What's the difference from F570 vs MA5? Thanks man.
The major difference is size, 5" vs 5.7" and the input/output sockets are in a different position (sides), plus a few other design differences. But I think it's now a superseded model as Feelworld doesn't list it anymore.
Thanks tom
I'm getting the ultra bright monitor
1st! And my friend just picked up the T7!
It's a good all around monitor... just wish it had SDI connections cuz most of my cameras have SDI
actually I beat you by a minute lol
@@TomAntos Likewise. I was looking to get a larger Feelword Monitor for a client Video Village. Something around 24 inches. Do you recommend one for that size? Thanks Tom!
@@ZWAmundson theybhave a 19inch broadcast monitor. it looks great
@@directedbyericsattler Oh thanks mate! I'll look into it!
If they make a 6" with the 2000 nits and pop in a good waveform...I'm in! :) I want the FW279S in the meantime. Just a bit too big and lacking a waveform. But the price for the HDMI only one is very attractive. 5" and dull is just no better than the P4K's screen, really.
They have Lut6 now 😉
@tom Antos Bought the 7 inch with just the hdmi but it gets very hot within an hour of use. does this happen to anyone else or is mine a defect wondering if I got a bad one.
I have the SDI version of the 7 inch, been using it all day long for shoots but doesn't get hot. I mean it heats up, but nothing unbearable. Had it for about 3 months now.
Bobby D'Buze ok I mean it gets hotter then the usual monitor I just hope it doesn’t go fire ball on me lol.
We Shoot Films Hopefully! Hehe
Depends which one. The T7 does not get hot. The super bright does get hot when it's brightness is set at 100
PRIVATE no not hot at all actually air conditioned and within 30 min it’s not gonna burn me but it’s hot not warm
Hi tom what battery does it takes on FW 279S Monitor
Sony npf style battery
@@TomAntos ty tom i hope same battery implies on z cam e2 4k as well...