One tip… assemble everything on the drain plug side on the work bench, then feed the other end of the cable through the drain hole from the outside then secure to the transom.. that way your not doing everything on your head or on the ground underneath the motor…
Run the bit in reverse first to prevent the gelcoat from cracking. Also use a bigger bit to recess the hole slightly and run the bit in reverse for this as well.
Thank you for the video! Purchased your bracket and got mine installed today. I encourage anyone who wants a remote drain plug to go this route. Very simple and easy.
This guy is stand up and his brackets are awesome.Nice doing business with you.
Thank you! New designs coming soon. Make sure to check out rocketcityoutdoors.com in the future for updates
One tip… assemble everything on the drain plug side on the work bench, then feed the other end of the cable through the drain hole from the outside then secure to the transom.. that way your not doing everything on your head or on the ground underneath the motor…
Run the bit in reverse first to prevent the gelcoat from cracking. Also use a bigger bit to recess the hole slightly and run the bit in reverse for this as well.
To prevent gellcoat from cracking, use a counter sink bit after your first hole drilled. This also will help prevent spyder cracks.
Thanks for the tip! Worked great.
Thank you for the video! Purchased your bracket and got mine installed today. I encourage anyone who wants a remote drain plug to go this route. Very simple and easy.
Thank you! If you don’t mind, please send pictures of your install to rocketcityoutdoors@gmail.com!!
Nice idea with the bracket need to sell idea to Flo right, made my own from plastic ammo can
i just placed an order for the 90 degree bracket yesterday from the website, will I get a notification or tracking once the bracket is shipped out?
Yes, you should’ve got a message about it being shipped
Check your spam folder and shoot me an email at rocketcityoutdoors@gmail.com if you still don’t see it
@@rocketcityoutdoors did you send to Spain?
Cover the surface with blue painters tape first, then mark your holes, now you can drill the same slow way you did in the video.
No link for the corner bracket with lips for mounting flow-rite
www.ebay.com/itm/275371742229
Drill in reverse for a little ways then go in forwards
Place tape on the fiberglass prior to drilling your hole.
Are you the guy that has an eBay store? If so, we live very close and I need to pick your brain.
Yeah that’s me
Where do you live?
I’m in meredianville, I want one of your battery’s on/off brackets and was wondering if I could just pick it up?
Also, do you fabricate delete plates for the bow?
Yeah that’s fine. Send an email to rocketcityoutdoors@gmail.com