just bought the hand guards, mounts, mirrors and lights thanks to you bro. I didn't even know they made this!!!! I love it...I hope I don't have a hard time with the wiring. Im not really too electrically inclined lol
Thanks Ricky I’m just looking at it also. Thanks for the video they look great. Have you thought of getting the extenders, it’s a foam surround that fits on the guards and gives you double the protection from with and rain.
No problem man, didn't think Id enjoy making vids as much as I am. I haven't looked at the foam surrounds but it sounds like something I'd use ... I'll check it out. There is a way to mod the hand guard lights with a regulator type thing. Im looking into it and Ill post a video
Hey my man, ok so like I said, I have questions lol. Wondering if u can help me with this issue. I got front and rear led lights on my keyed power. I got a horn, front hand warmers, rear hand warmers and a thumb warmer. All on the same line. Even the Powermadd led hand gaurds. The 20 amp accessory fuse blew twice on me. Obviously that's the fuse for all the above. So I'm trying to figure out what is making it blow. Which one. If any specifically. Cuz the weird thing is, it blew twice randomly. Nothing was even on. So then I put another 20 amp fuse in and slowly put everything on one at a time to see what blows it. I eventually had every electric accessory running on the entire quad for over and hour and it didn't blow. So I can't figure out why it's blowing but won't blow when everything is on. I even turned things on and off over and over. Including the ignition. Nothing. Any ideas where to go from here? Also I know u shouldn't really throw in a bigger fuse but I was thinking maybe a 25amp. I would think it's still safe. Wdu think? Thanks in advance. And I'll post a vid soon.
Deerector I'm not a pro but here's my opinion: the front and rear lights should be on its own fuse, the horn on its own fuse, both hand warmers on its own 1 fuse and the handguard lights should be on its own fuse. I can go into why but to keep this short its so you don't lose everything at once and the wires won't run hot. Cut the positive wire and put a fuse in between the cut. The main wire from the battery should be the thickest wire. Ask me anything else you need.
Ricky's Garage Vibes hey thank u for getting back to me. Ok so I'm a little unclear on ur recommendation. Your saying run each accessory directly to the battery, and put a fuse on each one of those lines going to the battery?
no problem. there are two main wires coming from the battery (1 positive, 1 negative). On the positive red wire, between the battery and the component, cut the red wire and put a fuse. A fuse for the horn, one for both front/rear lights, one for both handwarmers and one for the hand guards lights. Ill put together a vid to show you what I mean
Ricky's Garage Vibes wow that would be great. I've always had quads but never did any upgrades. There are so much nice stuff out there and really wanna take advantage of it. And I wanna do it myself rather than pay through the nose. Thank u so much for the vid. But don't go crazy. I know these things take time.
just bought the hand guards, mounts, mirrors and lights thanks to you bro. I didn't even know they made this!!!! I love it...I hope I don't have a hard time with the wiring. Im not really too electrically inclined lol
Deerector best news I heard today! I'm here if you need a hand
Ricky's Garage Vibes thank u so much. I'm sure I will def need spent tips when I put them on. 👌🏼
Yes !
After watch your videos about powermadd im thinking buy them to for monting in my brute force 300.
You’ll love it 🤝
Alredy bougth orange and black
Perfect!
do those mirrors stay locked in place when on a rough trail?
Danger Ranger they don’t slip, they stay where you put them ... I would take them off and tell you guys if they didn’t
I'm meant do they stay in the up position
Thanks Ricky I’m just looking at it also. Thanks for the video they look great. Have you thought of getting the extenders, it’s a foam surround that fits on the guards and gives you double the protection from with and rain.
No problem man, didn't think Id enjoy making vids as much as I am. I haven't looked at the foam surrounds but it sounds like something I'd use ... I'll check it out. There is a way to mod the hand guard lights with a regulator type thing. Im looking into it and Ill post a video
Best to fit with screws facing out so not to have them stick in your knuckles if you come off
Thanks, makes sense
ArgosWarrior thanks for this, I ended up facing the screws out and cutting them down
Share your odometer purchase link
It came with the odometer Rahul
Hey my man, ok so like I said, I have questions lol. Wondering if u can help me with this issue. I got front and rear led lights on my keyed power. I got a horn, front hand warmers, rear hand warmers and a thumb warmer. All on the same line. Even the Powermadd led hand gaurds. The 20 amp accessory fuse blew twice on me. Obviously that's the fuse for all the above. So I'm trying to figure out what is making it blow. Which one. If any specifically. Cuz the weird thing is, it blew twice randomly. Nothing was even on. So then I put another 20 amp fuse in and slowly put everything on one at a time to see what blows it. I eventually had every electric accessory running on the entire quad for over and hour and it didn't blow. So I can't figure out why it's blowing but won't blow when everything is on. I even turned things on and off over and over. Including the ignition. Nothing. Any ideas where to go from here?
Also I know u shouldn't really throw in a bigger fuse but I was thinking maybe a 25amp. I would think it's still safe. Wdu think? Thanks in advance. And I'll post a vid soon.
Deerector I'm not a pro but here's my opinion: the front and rear lights should be on its own fuse, the horn on its own fuse, both hand warmers on its own 1 fuse and the handguard lights should be on its own fuse. I can go into why but to keep this short its so you don't lose everything at once and the wires won't run hot. Cut the positive wire and put a fuse in between the cut. The main wire from the battery should be the thickest wire. Ask me anything else you need.
Ricky's Garage Vibes hey thank u for getting back to me. Ok so I'm a little unclear on ur recommendation. Your saying run each accessory directly to the battery, and put a fuse on each one of those lines going to the battery?
no problem. there are two main wires coming from the battery (1 positive, 1 negative). On the positive red wire, between the battery and the component, cut the red wire and put a fuse. A fuse for the horn, one for both front/rear lights, one for both handwarmers and one for the hand guards lights. Ill put together a vid to show you what I mean
Ricky's Garage Vibes wow that would be great. I've always had quads but never did any upgrades. There are so much nice stuff out there and really wanna take advantage of it. And I wanna do it myself rather than pay through the nose. Thank u so much for the vid. But don't go crazy. I know these things take time.