Heavy Duty Recovery Takes 4 Different Trucks
Вставка
- Опубліковано 18 кві 2024
- In this video, The Sumter Wrecker Crew responded to a rolled over Sky Lift that became disconnected while turning. We used several differant wreckers to recover the counter weight, trailer and sky lift.The driver was not injuried. Thanks for watching, don’t forget to LIKE, COMMENT, SUBSCRIBE, and SHARE this video!
Email Me Here- Sumterwrecker@yahoo.com
Send Mail Here-
Hal Watts
324 Green Swamp Road
Sumter, SC 29150
Follow Us on Social Media
Facebook - / sumterwreckerservice - Авто та транспорт
I have seen more videos lately of those telehandlers on their sides stuck in the mud or just not running at all. You have on heck of a great crew of men Mr. Hal
Mr Edwin We appreciate you watching our videos and commenting. Stay safe
Old school iron working not a rotator in sight.....💯
Mr Todd Yes sir. Thanks for watching and stay safe
Now that's a real job.
Nw Pioneer We appreciate you watching our videos and commenting. Stay safe
15 Dot guys standing around just to tell you to clean the road. 😅😅. Great job guys. Love it. 💪💪💪💪💪💪💪💪💪
Mr Bryon Thanks for watching and commenting. Stay safe
Your tax $$ at work🙃
The appliance of Science, quite a lot of calculations going on today, excellent work by all.
Thanks for sharing
Bosted Tap We appreciate you watching our videos and commenting. Stay safe as well.
Nice to have a wide road to work with.
Mr Dean Yes sir. Thanks for watching and stay safe
There should be a cap on each drive wheel that has 2 bolts holding it on if you remove those bolts and turn the cap over and put the bolts back in it will put the drive motors in free wheel so all 4 wheels will turn Nice job on the recovery
Mr Stuart thanks for the tip. I will look at the next one I tow. Stay safe
He is correct--turning the axl;e cover around with the dimple in the middle actually pushes the axle shaft in farthjer-releasing the gear inside.
Your men will learn a lot from you Mr. Hal . Great leadership and the recovery was perfect . Those SkyLifts are heavier than one would think .
Mr D Vint Thanks and we appreciate you watching. Stay safe
Good thing no one was coming the other way. This could have been a disaster. WTG SW!
Mr Mike Thanks for watching and stay safe
Great job Mr Hal and crew, fast and efficient.
Mr Dominique Thanks and thank you for watching. Stay safe
You can take the 2 bolts in the small caps in the center of the hubs out, flip the caps over and bolt them back on to freewheel the hubs so the machine will roll.
Tired old mechanic Thanks for the tip. Thanks for watching and stay safe
Great recovery Mr. Hal. Teamwork makes the dream work.
Mr David thanks and thank you for watching. Stay safe
Everyone says you need a Rotator Wrong Mr Hal and his outstanding crew are the Rotators in the Big Rig Wrecking Business .. Outstanding work Sumter Wreck Crew everyone worked together all had a job to do and you got it done lighting speed no million dollar high end equipment used in this video just simple commoncent's and teamwork .. Big Red 30t did the heavy lifting with no wheelie ok doing a wheelie is cool LOL .. Take care Mr Hal and crew and enjoy your weekend
Mr Roger Thanks for watching and stay safe
Team Work Makes The Dream Work :) can i say this Mr Hal, I have watched many videos on UA-cam but yours must be the most respectfull team that work together, always being respectful to each other ,that my friend is a delight to watch and how we should all work together, thank you for sharing with us :)
Mr Mark We really appreciate that. We have a young team but all are quick learners. Thanks for watching and stay safe
Thanks Guys.
Dish Soap works wonders for sliding tires on the Road or Truck/Trailer beds.
M9ovich Yes sir we keep spray bottles on the rollback. I need to put one one the landoll. Thanks for watching and stay safe
Used a few bottles myself. Metal or wood skates can make things easier too.
great job Mr Hal you and your team did a great job 👏 👍 😀
Fishpolice Thanks for watching and commenting on our videos. Stay safe
You have a good team Mr. Hal!
Mr Bobby Thanks. They are young bit willing to learn. Thanks for watching and stay safe
@@SumterWrecker We were all young once. As long as they are willing to learn you are fortunate.
Another great recovery Mr.Hal!
Mr Jay Thanks for watching and stay safe
Mr Hale... YOU have your hands full watching your boys from getting hurt, There like Squirrels
Mr JR Thanks for watching and stay safe
I like the way you getter done.
Mr Bryan Thanks and thank you for watching. Stay safe
Great job as always you all have a great day
Mr Lee Thanks and thank you for watching. Stay safe
your team did a great job thank you
Mr John Thanks and thank you for watching. Stay safe
Brilliant video, I'm exhausted just watching you😎
Mr Kevin thanks for watching and stay safe
Good job, good crew. It never ceases to be amazing how that came to be.
Thanks for sharing Boss Man! 👍🇺🇸🤔
Mr Barry Thanks for watching and stay safe
that looked to be a small handfull,good job,as always...thanks for sharing your day with us you tubers....
Mr Robert We appreciate you watching and commenting on our videos. Stay safe
Great job. Good team and great leader.
Mr Will We appreciate that. Thanks for watching and stay safe
Sir, your experience shines through, your knowledge of how and where to rig is phenomenal. Great work by you and your team. 🇦🇺
Mr zwonjat We appreciate that. Thanks for watching and commenting on our videos. Stay safe
Why homeboy standing there watching boss man and trying to tell him how to do something he would not make it long on my crew it hard to take some omen like that seriously and he’s not wearing any reflective gear like the other guy that’s handling business and talking to the boss wire respect😊
Good job. Keep up the good work. Whole crew worked together..............Jay
Mr Jay Thanks and we appreciate you watching. Stay safe
Great team effort there from the whole sumpter wrecker crew. 😎🇬🇧
Mr Andy Thanks and we appreciate you watching. Stay safe
Thank you and stay safe.
Me Mauritz thanks and thank you for watching our videos. Stay safe
Another masterclass by the team. Well done Mr Watts
Mr Pedro Thanks and thank you for watching. Stay safe
Good job Mr hal and boys ❤to family Mr hal from rob in the 🇬🇧
Mr Rob Thanks and we appreciate you and Mrs Tracie watching. Stay safe
Great team work.. Having done heavy hauling rescue for a few years, Your leadership skills were on point.. I will say, the best (and cheapest) investment for my crew were High Quality 2-way radios “with in-ear headsets” You can make those (sometimes needed) split second decisions and the entire crew is aware of what’s going on. Good Motorola radios were always my choice… You can even rent repeater space real cheap nowadays, so the radios will work over your entire city, county and beyond. Stay safe out there..
Music Maker Thanks for watching our videos and commenting. Stay safe
Keep up with the good work love watching you on UA-cam god bless
Mr Lloyd We appreciate that. Thanks for watching and stay safe
Everyone worked together just like a well oiled machine thank you Mr Hal for the video
Mr Abuubaydullah Thanks and thank you for watching. Stay safe
I always really enjoy your videos so keep up the great work you do….My friend may God’s blessings always be upon you and your love ones …..Jerry
Mr Jerry thanks and thank you for watching. Stay safe
Mr. Hal mighty good job, You are a very smart man.
Mr Charles We appreciate that. Thanks for watching and stay safe
That was a bit of a job there....but you made it....Stay safe and see you on the next one
Mr Neil Thanks for watching our channel and stay safe
Your crew worked well together with leadership. No questioning in the huddle. Just like it’s supposed to work.
Doak48 Thanks and we appreciate you watching. Stay safe
its a whole different then Thanksgiving at my house
Good Job Team Hal !!!
Mr Brad Thanks and thank you for watching. Stay safe
Great job guys. You guys do good work. Thanks for sharing and have a great and safe weekend!!
Proud Papaw Thanks and we appreciate you watching. Stay safe
Great team work! Mr. Hal you have a lot of rigging knowledge. Stay SAFE!
Mr Peter We still have alot to learn. Thanks for watching and stay safe.
That looked like a tough one Mr Hal. Great team work got the job done though 🇬🇧👍🇬🇧
Zippyisking Thanks and thank you for watching. Stay safe
Great job cool video thanks for sharing
Mr Earl Thanks for watching and commenting on our videos. Stay safe
Nice job!!
Mr Rupp Thanks and thank you for watching. Stay safe
Mr Hal thank you for the viideo i appreciate the work you take to make them that 30 ton sure is a handy piece of equipment have a great week
Thanks for watching and stay safe
Good Job 👍
Mr Chris thanks and thank you for watching. Stay safe
That is a lot of work.Good job you and your crew
Mr Norman Thanks and we appreciate you watching. Stay safe
Good job
Mr Jimmy Thanks for watching and stay safe
WOW another great save guys! The guys listen to your directions and work together well! Thanks Mr. Hal for the video!
Mr Scott Thanks and thank you for watching our channel. Stay safe
You make it look easy, it takes a lot to make a deal like that come together. Harmony at work. Thanks Mr Hal.
Mr John Thanks for watching and stay safe
That's well done, great team and whew that sure looked like a mess once you got on scene. Yet it ended up no problem, you are great!
Mr Seth Thanks for watching and commenting. Stay safe
What a mess. Big $$ Damage on this wreck. Amazing work getting her cleaned all up. Not sure on the condition of the Skyjack Lift.
Mr Phil Thanks for watching and commenting. Stay safe
another great job
Mr Mike Thanks and we appreciate you watching. Stay safe
Very nice job guys Keep up good work
Mr Dean Thanks and thank you for watching. Stay safe
Mr Hal
Great team!
Mr Gary Thanks and thank you for watching. Stay safe
Nice work there!Me thinks some driver did NOT do a tug test or check his fifth wheel before staring out. Oh-well-works for you.
Mr Glenn Thanks for watching and commenting. Stay safe
That is a PINTLE connection. not a Fifth Wheel. Looks to Me He made the Right hand turn and flopped it over breaking the Hitch on the Truck...
Good job 👍
Mr Ed Thanks and thank you for watching. Stay safe
Great job
Mr Tim Thanks for watching and stay safe
Awesome as usual. Great teamwork. That was a heavy machine.
Mr Robert Thanks and thank you for watching. Stay safe
A rotator would’ve been ideal, but as usual you guys did a great job 👏🏼. You definitely have a good team Mr. Hal
Mr Kidd Yes sir it would have been easier but we made it work. Thanks for watching and stay safe
A lot of hard work by all involved Hal, and yes I do like your content and do subscribe already.
Mr Hugh Thanks and thank you for watching our videos. Stay safe
Nice work.
Kawafer1 Thanks and thank you for watching. Stay safe
A nice smooth,controlled upright on the trailer and the skylift. Those lifts sure are a chunk of weight to handle, we have had to deal with them before as well. Nice job on the entire recovery!
Wilcox Garage Thanks. Love the rotator. Thanks for watching and stay safe
great video
Mr Gary Thanks and thank you for watching. Stay safe
@@SumterWrecker you are welcome and I will be safe
Nice team work fellas! 🙂👍 What a shame, that was a nice trailer that got tipped 😖
Mr Zane Yes sir. I think it very minor damage. Thanks for watching and stay safe
A great team effort with a great LEADER!
Topwatch It was a team effort. Thanks for watching and stay safe
Who needs a rotator 👍👍 but if you did could did it all with one truck and could pick it back the lan-all under it 👍🇺🇲👍
The Blue Bike Doyle Thanks for watching and stay safe
Mr. Hal, Good job. . . Where is the Dodge work truck ?? Would you want some amber lights for the new truck ? These lights are for grill etc.
Mr James 314000 miles got to it. Timing chain. Not sure if I am going to put a used motor in it or not. Thanks for watching and stay safe
You have a great team! They think ahead.. and work together very well!
Thats weird how that overturned. Was he just driving straight and it rolled, or did he just make a corner onto the main road?
The trailer got disconnected while turning.
Mr Mike I think he was turning when the trailer became unhooked. Thanks for watching and stay safe
Josh has truck just waiting for your name to be put on it.
Mr Timothy I saw a 35 ton for sale. Thanks for watching and stay safe.
Who needs a million dollars rotator ? Not you sir. You do know you should be able to release the breaks on the wheel hubs by flipping over the round plate in the center of the hub.
Mr Larry I do now. Thanks for the tip and thank you for watching our channel. Stay safe
strange how the clean up changed. Lazy DOT?!
Mr Woody Yes sir. Thanks for watching and stay safe
Somebody had a real bad day. What year is your frontier? I have an 2018
Mr Tim 2016 Thanks for watching and stay safe
Should have called Pepe's!!!
Dpacheco7349 I don't think Josh or Alex would drive that far. We used what we had to clear the wreck quickly. I could have completed with 2 trucks but it would have taken longer. Thanks for watching and stay safe
Need to clean up your trucks
Pretty doesn’t make money! Might look nice, but, then you don’t want to get them dirty. Sumter been in this game a long time!
Mr Douglas Yes sir they do need a little Tlc. Thanks for watching and stay safe