ASUS RTX 4090 - Is it possible to work again ?
Вставка
- Опубліковано 4 жов 2024
- 👉Need a repair? krisfix.de/en/...
👉KrisFix Shop: www.gpufix.de
👉Question about repair: service@krisfix.de
👉Follow me on Instagram: / krisfixgermany
Der8auer's video:
EN: • I tried to repair my R...
DE: • RTX 4090 gekillt. Wenn...
👉Need Help? Book your Technical support here: support@krisfix.de
👉 Leave a tip for us if we've helped you out:
-PayPal : www.paypal.com...
-ETH: 0x03FFa9DF33F4edcE958a0729B30Dd5A9241DeFE2
#krisfix #gpu #repair
Pictures: www.techpoweru...
This repair was successful and I was able to test the card for about 2 hours and everything was functioning normally. Once Der8auer got the card and tried to test it unfortunately there was no picture. There could be multiple problems and not all of them showed symptoms while the card was with me. As this video shows there is serious oxidation on many of the pads and most likely the other 11 ram chips may have the same problem. The card will be returned to me and we will do a follow up video of this repair where we will find out exactly where the problems are, but definitely all the ram chips need to be reballed.
That sucks the manufacture should fix the card, its their failure in manufacturing.
@@GodKitty677 they would have done this. der8auer explains it in his video why he went this route.
Yeah I wondered about this, if the one RAM chip was so bad who knows what you may find under the others.
But it was prudent to stop after the known failing chip was fixed because no point in pulling the other ram chips if they’re fine.
@@floodo1 Removing chips that work just to reball, risks killing the card for no good reason. Some places its 50/50 chance to work after reballing all the memory chips.
Could be that the card was damaged in transit.
@@RanjakarPatel they say same my village. he need understanding more 2 make repear
This was one of the coolest videos I've seen on GPU or even computer components. I've never seen the backside of a gpu or RAM module and this was really cool to see. Great expertise and work. I would love to watch more.
what this man said. incredible to watch!
I know. I just got addicted with his videos. I'm a computer engineering graduate so naturally these type of stuff interests me. Unfortunately doing these types of repairs is next to impossible from where I am cause the resources needed are hard to come by
KrisFix is some kind of magician :-)
Check NorthwestRepair
Der Unterschied zwischen einem Hardware modder und einem Experten. Hat vielmehr Aufmerksamkeit verdient.
Dein Kanal sollte definitiv viel bekannter sein! mega gute Arbeit!
4k Abos an einem Tag, sauber.
mein abo hat er auch! nicer typ
Qualitätsarbeit, am content noch arbeiten, und dann Videos auf deutsch. Zack 100000 Abonnenten 😂
Danke dir
sehe ich auch so, hab gleich mal ein Abo da gelassen :D
Though for me this is far too deep to really understand, I must say the way you present things with the lighting conditions, camera angles etc. is excellent. I am fascinated.
Don't let it scare you off. There are some simple measurements that you can do to isolate issues on GPUs. The hard part is finding the right points on teh board to take those measurements. I fixed a card last year by following some of these videos.
I've built many PC's over the decades, and to me watching your video it's literally magic. No one I know has this skill of repairing components. Perhaps this should be taught in schools?
It should be funded bu governments to avoid repairable items to end up in landfills
This is a master at work. As someone who started soldering a couple of years back to save electronics from going to landfills. Seeing this level of complexity has left me completely in awe of your skills and tools!
No way, we did it boys 😮. I can’t believe Der8auer saw our comments.
I think a few of us said same thing.............. 🙂
ofc :) I always read your comments
@@der8auerNot many big tech UA-camrs do. It’s really awesome that you have your card working now, and KrisFix hopefully will get some more exposure to his repair service as well :)
@@JohnMuz1 exactly...
@@der8auer Maschine 😬😉
Obwohl ich die Karte auch kostenlos für dich entsorgt hätte! 😂😬😉
VG Lukas
I think the corrosion under the memory chip was primarly caused by condensation that formed while he was overclocking the card and cooling it with liquid nitrogen. His reflow attempt combined with the already corroded balls then caused the solderjoint to break.
Schön sowas mal zu sehen. Ich komme grad vom "Der 8auer" rüber um zu sehen was hier so los ist. Sehr beeindruckend was überhaupt alles so möglich ist. Und Ich freue mich auf die Fortsetzung ohne direkt zu spoilern.
Between watching you and Northwestrepair (another channel here on UA-cam that does repair work like this the proper way) I find myself really wanting to learn to do this kind of microelectronics repair work. You're an inspiration. Thank you.
I also came here through der8auer. Interesting channel. You get a good insight into the structure of such graphics cards. Sophisticated soldering technology and tools, maybe you can show them in more detail at some point. Looks all pretty professional. 👍
came here because of this GPU/DER8auer and would like a "look" at the reballing / reflow / computerized chip solder / removal (not at a copy level but how it is done / like your GPU repair levels)
Im just fascinated how you know where to measure and what to expect its so complicated, so many components and the way you dissasemble and clean and take in place again just make it look like walk in the park. Im amazed.
With the measurements I can understand what is happening to some degree. I'm lost each time Kris goes into schematics. It's complicated and I loose track of what he's talking about quickly.
Amazing work Kris. Extremely professional and clean (very German). You make it look easy!
Sachverstand, sehr viel Erfahrung und passendes Equipment machen es möglich...Hut ab, guten Job gemacht!👍
Einfach erstaunlich, das ist ein Einblick in eine Welt, die ich schon immer mal so sehen wollte, echt krass!
Danke
Man it is really really REALLY cool to watch someone with so much knowledge and skill and Kris you're very humble, impressive stuff! I am absolutely astonished by this view into the way a Video Card is repaired and even just assembled in the first place. Wow! I hope this collab brings you heaps of subscribers. I will be one.
Thank you
think we can start from changing wallpaper here
Awesome job Kris! I've been a follower of Louis Rossmann (Rossmann Repair Group) here on UA-cam for a few years. He (and his crew) do component level board on MacBooks. In the last year or so he has shifted his energy into Right to Repair (along with his personal tribulations ...lol) here in the U.S., but his many videos prior to about 2021 are most informative. He is a little acerbic ... a true New Yorker ... but does pass on much helpful learning to the public.
Thanks for your really great and pro level content here!
DT
Nice! Never seen such a great BGA rework with such with such attention to detail. Sub, Love it!
This was a simply amazing repair process. I have never before seen such a process. And let alone on a $2000 video card.
Thank you for this.
I loved how the comment section on his video was mostly: "Check KrisFix, he is the master in gpu repairs " :D
Wow, amazing work, this is close to magic! I'm actually happy now that Der8auer killed his card and we all had a chance to see this. Your channel definitely deserves way more attention and I hope this video will boost the number of your followers!
Came here from Der8uer. Solid work! Thx for the video.
subbed :)
Kannte dich vor den Video von Der8Auer garnicht aber echt krass wie viel Feingefühl und wissen du hast du müsstest echt mehr Aufmerksamkeit haben👍👍👍
Stimmt, aber Der8auer hat ihn ja grade gepusht, sodass er diese nun sicher bekommt. Abos jetzt schon x2 und views x20 !? Definition von Skyrocket .. und verdient hat er's.
Its new for me that you can remove the actual gpu. Solder Balls. Blown away! Awesome work, keep it up! I hope that this push from der8auer will boost your subscribers. Worked for me, I just subscribed! :)
Crazy, ich habe sowas noch nie gesehen... Aber es wahr ein sehr Interessantes und gutes Video, mach weiter so mit deiner guten Arbeit! Ich denke Roman kann sich freuen das seine Karte wieder heile ist :)
Habe noch keinen gesehen, der das so professionell macht. Kein Wunder dass es so krass gepusht wird, sowohl bei Roman als auch bei Kris ist es wohl das Video mit den Top views in den ersten 2 Tagen.💥Nun wollen alle wissen, was der Karte fehlt ! 🕵♂
Glad Roman introduced me to your channel, I look forward to the next video, and will be watching old ones while I wait. Hope this project brings you more new subs like myself.
Great work!
I see it that way too, at least the views are going up. The der8auer video brings in 3 hours as much his others get in weeks. Good push.
craftsmanship. Good you guys worked together to show this. It gives hope for people with expensive GPU's to maintain them longer. Really nice !
That was amazing to watch. I didn't even know people outside of major labs could do this kind of work / testing!
Da sieht man die Passion für solche Arbeiten. Sehr gute Analyse und Eingrenzung des Problems auf Profi Niveau. Dazu dieses extrem gute und saubere Arbeitsweise! Ich bin sehr beeindruckt. Du verdienst mehr Abonnenten @KrisFix :
I recommended your channel to der8auer in the comments. Really glad you got to fix it for a while.
Impressive work, very satisfying to watch.
Master in action, thx for the presentation and for seeing someone with such a controlled & steady hand. This is under microskope, great respect.
Dein Kanal ist völlig underrated! Tolle Arbeit und Video Dokumentation.
Danke
Very cool, thanks for this excellent video. Your process and production quality / editing is top notch. Nice work!
Warum hat so ein genialer Mensch so wenig Abonennten und so vieler UA-camr die nur Blödsinn machen so viele Abonennten? Mach weiter so, das war mal ein richtig gutes Video mit sehr guter Erklärung.
Naja, das ist die Natur der Sache, dass Menschen mit sagen wir mal einem "anderem" Blick auf die Welt ein wenig Unterbelegt sind in der Masse. Das wiederum führt dazu, das die Masse immer jemanden der mal was Tolles macht zum Bejubeln und Feiern sucht. Ungeachtet des Inhaltes, welcher einem von den Feiermenschen präsentiert wird, kommt ein solcher Kanal eben nicht auf die Würdigung, welche ihm leider nur aus ideologischer Sicht zustehen würde. Es ist also alles genau so, wie es sein soll, wenn man nicht eben mal vor hat, einige Parameter so Grundlegend zu verändern, das man sowieso nicht sagen könnte, was anschließend dabei raus kommt. Wer Chaos schafft, bekommt Ordnung und anders herum. Oder anders: Wenn ihre Frage nicht vollständig Beantwortet ist, ist sie richtig Beantwortet. Salve Alucian.
Been watching virtually every GPU repair channel I can find yet this channel was never once recommended to me by UA-cam. UA-cam is so useless sometimes. Luckily I found it through DerBauers video. GPU repairs are amazing.
After watching so many US-based UA-camrs, you've no idea how nice it is to hear the word "solder" pronounced correctly :D
Wild was er alles hat. So einen Schlammsauger für Lötstellen.
Und auch das magische magnetische Chip-desolder-Gerät.
Gute Arbeit.
(Ich hätte das auch mit den Tools nicht hin bekommen.)
Really happy i've found your channel. Amazing work , keep it going.
Wahnsinn! Höchste Hochachtung an dein Können!
Danke
Wollte aber nur sagen, Respekt vor dieser Arbeit Kris. Never seen it before. Hardwarehero.
Danke
Awesome! I repair amplifiers, produced till 1990 and it's always crazy to see how small the electronics have become :D
Vielen Dank für das aufschlussreiche Video. Ich bin über den 8auer auf das Video gekommen. Ich hoffe das Video schauen sich viele an, bevor sie selbst an ihrer 2000€ Karte herumdoktern.😉
I never saw how a GPU gets repaired, but this looks realy amazing.
You can be shure i will watch other Videos from You're Channel for shure. 👍❤
Thx at you and der8auer for making this happen.
Thank you
As always a really good fix Kris. I'm so happy that Roman actually sendt the card to you. I was was one of the people that said he could send it to you. I love your work as always. Nice job. Love from Norway
please, need more videos ! I have absolutely no idea what you are doing, but I love it to watch :D
Awesome video and great work! I'm looking forward to pt. 2!
Wow, this was amazing! I've never watched a repair video of someone using a stencil and a machine like that to resolder a processor, very cool, have a sub!
wow.... never seen this done before, a true craftsman at work
I am impressed by your skill and professionalism! It is awesome to see you working on that thing! Thanks for sharing 😮
Impressive presentation. Thanks!
Du bist Klasse! Gleich Abo und Daumen hoch da gelassen. Es hat mir Spaß gemacht Dir zuzuschauen wie Professionell du an die Sache herangehst, und die Karte reparierts. Du hast es echt im Blut.
Danke
Dieser Kanal hat wirklich viel mehr aufmerksamkeit verdient.
Grandiose Arbeit! Abo ist da :)
This channel is underrated😢. What a beast 👍 keep working 👍
Kris is In a league of his own !
Well done mate ! 👏
I wish my hands were that steady. Amazing video. Thank you.
Google thought i should watch this. I do not regret a second. Informative and interesting!
This is awesome! I saw the der8Auer video on this card and I, and probably the rest of the gpu repair guys, desperately wanted to test it and solve the problem. Now you've solved it for us.
Thank you so much!
Insane work done on this card, I never thought I would see it running again, Bravo, hopefully it can be resituated a second time. But knowing Der8auer I'm sure there will be a 3rd "DOA" Incident sooner than later 😆. I assume when you know the fundamentals you can fix any GPU ...
Good work, I do find it quite funny all the negative comments or recommendations of what you should or should not have done. You are a professional and will do what is required to fix if possible the faulty 4090, you tested and proved it worked after you had reballed the GPU and a RAM what else do people expect you to do. If you find no more faults then its fixed, when its returned to you I am sure you will find out what was the additional fault is that appeared after it passed your previous tests. Great video. We look forward to the next video.
We need a follow up. Have him send it again! Send him screenshots that there is a demand!
Awesome love this channel thanks to der8auer that he gave us a link to your epic channel as ima love repairing retro tech or at least trying my best that is perfect work :)
Absolute magnificent Video, well done job on the card too - Thank you for the insights!
Meticulous, clean working environment, well spoken, calm, you're a cool dude my man.
Great job and my Respect. Greetings from the der8auer community
Einfach nur amazing und super professionell. Coole Idee von Roman. Wer Ihn gerne schaut ist hier genau richtig. Danke und good Job
The cleaning process was so satisfying to watch. I can watch that all day
Fantastic! Love watching a professional work their craft.
Wonderful, Kris. Realy nice, i have never seen this before and i am very impressed. Thanks and Greetings from Frankfurt - Andreas
Interesting that there was corrosion under not only one of the mem chips but a few of the GPU pins, so imho 100% on Asus and not Roman. This is precisely WHY we need right to repair, so we have access to professionals like Kris. @Kris, top job fella!
these corroded pads could be an issue caused by the temperaturestress by ln2 cooling. after cracking the gaps start corroding quite fast.
I just need one word: Amazing! Some of the most professional stuff, i've ever seen! First time i saw a reballing mask in action... Thanks for that! :)
to be fair to der8auer, he probably did the nicest "heatgun reflow" i've ever seen, using a bottom preheater and a thermocouple to monitor temps, I'm not too surprised he didn't burn it. Looking forward to the next video
The equipment that took the core off the board was awesome to watch! Great video!
This was such a high quality repair, congratulations on your excellent work! Definitively will watch the follow-up video.
An awsome recommmended video by us de-bauer watchers up to 6.42 subs now Kris, only way is up, been campaining for this guy to get more viewers , hope the De-bauer gets this man the recognition he deserves
Impressive rework job! I've done BGA84 and BGA96 reballs for DRAM ICs on embedded devices, but seeing you do this on such a huge package really gives me the confidence to take a crack at larger jobs.
Hey ✌🏻
Ich bin heute durch den 8auer auf dich aufmerksam geworden und finde deine Arbeit wirklich sehr spannend.
Werde mir demnächst definitiv noch mehr Videos von dir anschauen 👍🏻
Super, dass anscheinend viele Grafikkarten noch zu retten sind, wenn man denkt, sie wären endgültig defekt.
Mach weiter so, freue mich auf kommende Arbeiten 🙂
Abo hast du dir verdient 👌🏻
Amazing video! Quality & detail is off the charts!!
WoW - ich bin beeindruckt. Meinen Respekt für dieses techn. Verständnis und das handwerkliche Können.
Danke
Wenn mal irgendwas mit meiner 3080 ist, weiß ich jetzt an wen ich mich wenden kann. Hab jetzt fast alle Videos von dir durchgesuchtet, machst einen klasse Job.
Impressive Video and amazing analyzing and repair!! Nice coop with der8auer!
Grafikkarte "vom" der Bauer :D
Hab auch schon Videos von dir gesehen, genial wie nen Chip mit Solderbumps und den Lotkugeln usw. "verklebst".
Wünsch dir viele Abos!
Und Roman, falls es ließt, du bist ein Goldmensch, immer wieder! (hab neulich ein Video zwischen dir und Igor gesehen, danke fürs Vorbild bei Streit kann man sagen)
Great Channel. What a nice repairing video!
👍Great work as usual Kris "BRAVO"! Hope it is just a case of re-balling the other RAM chips. Loved the community recommendedations on der8auers channel, your reputation is serving you well ✌
Great video, never saw a GPU repair before like this.
Sehr informativ und interessant. Bin von diesem Video wirklich begeistert und von deiner Herangehensweise! Ich habe mächtig Respekt vor solchen Arbeiten, man darf nicht vergessen, wie Miniatur das Ganze ist.
Came here from Der8auer's channel; very interesting video to watch, thank you!
Du hast es sogar in die Trends geschafft.
Fantastic video, and glad to have found your channel through der8auer! If I'm unfortunate enough to need a repair, I know who I'll be contacting 😀
I was waiting for this one...
Awesome skills as always Kris !!!!
Auf jeden fall hammer mäßig wurde wieder die 4090 komplet repariert supper 👍👍
Thank goodness for surface tension. It is amazing and lucky that the solder 'knows' how to stay in place.
I’m sorry Kris for the following remark, i couldn’t help myself, but from some angles you remind me of Doctor Evil, i think the blouse does it.
Nice video and I’m really impressed by how professional everything looks ( the tools, the workflow, the results).
Sweater. Gotta stay warm and try consuming as little gas as possible.
Great work, really cool and interesting repair video!
This was great work, Roman is Happy . Tank You
Your miles better than that other guy👌
Wow really fascinating to see how you repaired that card. I guess you are a true tech-magician! 👍
Damn, loved this! Good Job!