10 Simple Drill Press Hacks || Woodworking Ideas
Вставка
- Опубліковано 1 чер 2024
- Inexpensive and convenient drill press accessories
Drill Press
Brand: SK11
Model Number: SDP-300V
Clamp
Brand: 髙儀 Takagi
Model:HQB-100-2P
Flashlight (ultra-compact)
Brand: RovyVon
Model number: UVA8JP
Strong magnet (diameter 16mm)
Brand: MAYDIYCI
Hole saw
Brand: Nikotech
Model number: H-BM 49.0
T-slot track (width 19mm)
Brand: CarAngels
Aluminum frame
Brand: ACE
Model Number: 3060 - Навчання та стиль
Congratulazione Maestro per i jig favolosi!!!👍💯💪
I found your channel about 3 years ago and just amazed every video the talent and the innovation in every video!
Amazing jigs, I can’t stop loving your ingenuity! Congratulations!
懐かしいな〜初めてボール盤使って押さえが甘くて部材が吹っ飛んで壁当たって穴が空いたことはここだけの秘密です😊
やすひろさんのこゆうアイデアホント素敵です😊
I couldn't stop watching this till the end! So many ways to drill a hole!!
This is the best jig channel ever!!!
Sometimes I come across a video like this and it's pure gold. Fantastic!
I have been watching as many of your videos as I can, I'm driving my wife crazy. You explain so much during your videos without saying a word. このような楽しくて有益なレッスンをありがとう .
Спасибо за видео. Красивая работа, хорошие, простые и интересные идеи. Лайк. Смотрю ваши видео для отдыха.
Sunday school for Craftsmen at its best! ;-)
I look forward to helping you
thoughtful ideas and beautiful work. especially impressive is the set-up to center-drill longitudinally into threaded rod
You're one of the best.
Very encouraging. I will do my best again.
This press has worked like a charm for my projects ua-cam.com/users/postUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!
Thanks for plans. Multifunction table is especially great.
Thank you very much.
I'm glad to hear that.
Providing plans at the end
Absolute King 👑
Yet another great thinking out of the box, make sense on every application and great video presentation and editing
Glad to hear it. Thank you very much.
Each time i'm super impressed. Genius!
I thoroughly enjoyed how you made the clamping mechanism using cheap clamps, then never used it when drilling any more projects!🤣
Grazie Maestro per i lavori che fai sono stupendi👍💪💯
Grazie Maestro per i lavori che fai sono stupendi
Some very useful jigs and methods of working ... superb 👍
That is clever!
wow, this build will challenge my precision skill to build, impressing
Let's continue to challenge together.
thank you.
Great work.👏👏 Thanks god for its simple 😉
It’s so satisfying to just watch and learn to make these tool hacks to make more out of it. A lot of which will cost you more as options but most hasn’t even occurred to them and probably even copy a few from here.
スピンドルサンダーをグラインダー使って作ろうと思っていましたがボール盤の方が使い勝手良さそうですね!大変参考になりました、毎度参考になる動画ありがとうございます!
I love 💘 those cool blue tools 😅😊
"Хорошие приспособления, но пальцами держать лучше.".)
Спасибо за просмотр.
Также спасибо в следующий раз.
The drill chuck thing was cool, BUT did you see that Slowpoke? It even has feet as the catch. 😂 I am surprised no one else mentioned it.
Мне нравится как ты делаешь, спасибо!
All your videos are amazing!!! Thank you for sharing
Nice work and great ideas
Последнее приспособление то что нужно мне. Завтра пойду изготавливать. Спасибо.
Ideias e projetos geniais. Parabéns. (Bahia, Brasil)
Acho que posso fazer o meu melhor novamente.
feliz. obrigado.
Makes me think of things i need to do to my drill press. Soon I might upgrade it a few ways.
I’m always impressed with you skills and great ideas
I always get strength from all of you.
Is happy. thank you.
Que de belles trouvailles Bravo
Appriciate all your videos especially this as your drill pressie similar to mine so all jigs useful and possible to make. One thing I would add is a laser pointer. Otherwise can't think of anything else but congratulate you on work. Many thanks for sharing.
Очень признателен Вам, что поделились опытом 😊
I like how the rpm of the drill, matches the Videoframerate 👌
Excellent Work as always 😊
Clamp idea was very cool. I may try that myself. Centre drilling is cool too. Have to be careful the chuck on the bottom can't slide out of alignment, though. You don't need the sides for the multifunction table if you have clamps for the t-track.
私も木工が大好きで自家製テーブルソーを作って木工作を楽しんでおりますが やすひろさんの動画を見て目から鱗状態でとても参考になります 木工の楽しい点は治具次第で難しい加工も簡単に正確に作れる所が楽しくてしかたありません 今度トリマー「中古」を購入しますので今後はトリマー治具を作りたいと考えております 私もそうですが新しい治具を想像するのが楽しくて完成度が高ければ高いほど自己満足に浸っております ただ工作をする場所が無いためいつも野外の玄関の屋根下で工作をしており使い終わると家の中にしまうとゆう状態です 治具を作る時重点を置いていることは ローコスト 使いやすい がさばらない 有る素材を使う に重点を置いて作成しております 今後も参考にいたしますので「目から鱗」の治具を紹介お願いいたします。
thank you. I'm happy.
Smart man!
Simply brilliant!
thank you. I'm happy.
Excellente, très professionnelle.
Yes, why use the spreader clamp directly on the part and table when you can spend two hours over-building an unsafe top-mounted version with less clamping force?
Some terrific ideas here! Thank you for the inspiration. 👍 😃
Glad to be of service.
It is very encouraging. Thank you very much.
Very nice 10 from 10 Points 👍
Nice video, thanks for sharing it:)
Highly usefull, great ideas, thanks a lot.
Plate of your drill press have place for the vise. You can just use vise or clamp it to the plate. Moreover adding pressure between top of the drill and the plate you can bend the axis of the plate and drilled hole won't be perpendicular. And last but not least - if your drill bit stuck in material (like thin sheet of metal) it not only start spinning, but also your "improvised vise" will fly away. You have to build a fence on the plate and screw it to the plate if you want to be safe or use regular vise
😎
let's address your made up mental concerns
1. YOU CAN JUST USE A VICE. unless you have a milling vice, which is very expensive, you are not going to get the easy adjustability you get with his jig, nor will any vice be able to fit the range of sizes of piece you can use with his setup. so no, a vice doesnt solve many of the problems this jig solves
2. USING THE REVERSE CLAMP TO PUT PRESSURE ON THE PIECE CAN BEND THE AXIS OF THE PLATE. seriously? the whole press is built to handle some pretty extreme pressure you can put on that plate in normal operations by just pushing on the handle. moreover, did you happen to notice the point where the reverse clamp contacts the plate is much closer to the "axis" you are worried about than the drill head? which means there is quite a bit less leverage on the axis at that point than there is from the drill head. more-moreover, the clamp he is using is a squeeze type of clamp with quick-release that generates very little clamping force compared with screw type clamps. you see all that and you still imagine a problem in your head about 'bending the axis', and like all people who imagine problems you then believe your imagination instead of reality
3. THE FENCE SHOULD BE ANCHORED TO THE PLATE INSTEAD OF TO THE MULTI-FUNCTION TABLE BECAUSE IF A DRILL BIT BINDS THE WHOLE MULTI-FUNCTION TABLE AND THE FENCE WILL START SPINNING. please correct me if i have misunderstood what you are worried about here. cuz if i do understand what you are saying, this is the most nuts of your nutty points. here's a question for you. if you anchor your benchtop press securely to a heavy work table, which is bolted to the floor, and you bolt a vise to the plate and the bit binds, what will stop your whole house from spinning? that's a serious question. maybe you cant state the physics of it exactly but you would understand it intuitively. and still you're thinking a fence clamped to a wooden multifunction table, which has a good bit of mass, is going to start spinning like a little piece of sheet metal when a bit gets stuck in it. moreover, did you notice the multi-function table has a skirt that fits around the plate, which would prevent the table or fence from spinning? but of course, none of this will prevent the earth from spinning if a bit gets stuck. and if you believe that, boy do i have a good story for you about climate change
Have you ever heard of drill press tables?? They are use buy not only carpenters but machinist to. You are talking about drilling into the plate itself? Because that is what you typed in. There are slots in the plate designed for such things other than a drill press vise. He is showing ideas you can make on a budget. Some people can not afford fancy machinist vises, so ease up on the criticisms.
OMG! way to tear down his INSANE worries!! Don't you just love these arm chair woodworkers! LMAO...
Some valid points
Сверлильный пресс... Первый раз слышу такое выражение. И какое максимальное давление ваш пресс может развивать? Ступичный подшипник с автомобиля можно выпрессовать?
Can you do a workshop tour video? Excellent work.
We also put out a video of the conversion from a tatami room to a workshop. Please take a look if you like.
Thank you very much.
wow, awesome
I'm happy. thank you
Great hacks thanks
Super Arbeit.
👍 and subscribed!
Awesome idea and beautiful work 👍👍
Nice technique
A drill press is designed to cut vertically.
O CENTER DRILLING cheguei a pensar em fazer, mas como a minha furadeira de bancada demorou pra chegar, acabei por fazer um furo a mão, e claro que saiu de centro.
Outra ideia seria colocar a parafusadeira deitada (poderia até ser dobrável) aumentar a coluna e usar como torno!
Как всегда гениально 👍
This is great
Get an XY sliding table, and the center drilling demo is fine for non critical work, but you’re never getting true square and center drilled parts with any measure of depth on a drill press
Love the video. Please can you tell me what app you are using to switch on your vacuum with your phone. Many thanks.
Wow!
Hello, I would like to find the same mitre saw clamp that you use for small parts. Thank's for the vidéo
boas ideias
It's funny to see a video like this, in which a person points out x times "how not to do it" on the drill press and to use the shown hacks / jigs to clamp down the workpiece..., and he himself, during creating stuff in this video, do not use any tools for clamping down....😉😊
А чем ты клеишь? Как клей называется? Спасибо.
bravo usa
Can you put video for making that holder for mitre saw? tnx
Вот так надо изьебываться что бы к тискам струпцину присобачить? А не легче если нет тисков для сверлильного с низу к столу прижать? Эта пластиковая струпцина держит максимум 7кг
День добрый, подскажите, что за спиральное сверло в начале ролика и в конце.
Show !!!!!!
Hello, what brand of bench drill do you have? Thank you for answer.
Thanks for sharing this. Awsome ideas.
what kind of bench drill do you have?
Love this guy! Totally outside the "box" thinking! Just wish he told us why he's doing what he's doing while he's doing it...must be shy
How's your Japanese?
Buy a drill press vice and bolt it down.
👏👏👏
В нижний патрон надо зажимать сверло.
which model is your drill press??
Подскажите пожалуйста как называется этот клей который он использует
4:15 - 4:30 absolutely kills the very first idea of building that reverse clamp. Since you already made it, why not use it? Wasn’t that the improper way to fasten the object for drilling?
Other than that, nice video.
👍🏻💪🏻👌🏻🙋♂️
thank you for always
you know, they make drill press vises?
Source for the Bottom Chuck?
It will be better and safer to clamp from the drill base plate.
👏👏👏👍
thank you. I'm happy.
Drill press "Origins"
You use drill press ?
Do not show this while smoking😂😂😂 i like the art of handyman.
8:57 Не правильно. Надо не сверлом вращать, а именно деталью вращать, сверло должно быть неподвижно.
8:57 Wrong. It is not necessary to rotate the drill, but to rotate the part, the drill must be stationary.
А в чем разница? В подавляющем большинстве устройств резец движется, а деталь неподвижна (сверлилки, циркулярки, фрезеры, рубанки, фуговальные и т д - все, кроме токарного)
@@akrivobo , пока не попробуете не поймёте. А если про теорию, то деталь будет крутиться вдоль своей оси и сверло просто не сможет промазать мимо центра. Даже на обычной дрели это работает, если сверло зажать в тиски, а дрелью вращать шпильку. Формально даже кернить не придётся. Но если надо накернить ровно в центр, то на торце вращающейся шпильки, надо маркером вести от края к середине, пока не останется самая маленькая незакрашенная точка.
Спасибо за просмотр.
Ваши отзывы и мнения очень полезны.
@@akaULFхороший аргумент. Впредь буду знать. Спасибо! 👍
so, hack 1 and 2 ........ I just bought a drill press that has both of those things. Is this pay to win ? XD
Wo gibt es denn Schlangenbohrer zu kaufen?
#1 ...or just use a drill press vise.
Using auger bits on a drill press is an odd choice
Первая приблуда не удержит заготовку. Эти струбцины слишком слабые.