I have a 1970s stingray with a yd100 on it, it had the super pk80 but I had to pull it off for maintenance. Before I pulled it off I could cruise around at 37 and hit 40 once or twice with a 28t sprocket first run with the yd on a horrible tune got up to 32 at very low rpms but I only weigh about 130 as well 😂. I really wish I could get my channel off the ground I've got all different motors and bike sizes well a few. I also have both the 79cc four stroke and the bt80 and they are quite similar takeoff is much smoother with the bt80 tho for sure. That bt80 is a very underestimated motor imo.
I got three rides I'd like to share, a BT80 powered Hyper Commute, Phantom 85 powered Schwinn Frontier, and a Phatmoto All Terrain. I have daily driven all three to and from work, and I always have people talking about them, or wanting one themselves.
Thanks for the shout out the only thing I want to add is my sprocket in the back is actually a 40 tooth. not a 36 and I still plan on riding the bikes just in less populated areas. I like this type of video it was really cool to see everybody else's builds!
heyo from cenla! for the split m65 clones, honestly depending on how stiff your retainer springs on, it can sometimes be easier to just remove the header entirely rather than fight with the retaining springs to release. That being said, the split design does allow more flexibility to mounting to frame/angling the exhaust without having to use a torch to bend it.
To everyone out there I just want to say be careful with your Motorized bikes at stores. Yesterday my Motorized bike was stolen from outside of harbor freight. I wasn't in there no longer than 10 minitues.The guy cut the lock off my bike left his piece of shit bike there and left with my custom bike that was priceless to me being all the hours I spent making it my own. And if the police would of went after the guy after they seen on camera the way he went down the highway I'd have my bike right now. I'm so mad at how they handled the situation, now if it happened to someone they knew or if the guy had a gun, or even probably if it was a car that got stolen they probably would of actually did there job. I was homeless for 4 and a half years in the woods in a tent about 6 months ago. I was just getting my life back in order. And my only transportation and only thing I have besides a cheap rc car is gone. And for me to try and make money to somehow get another is in possible cause I need one to get to jobs to make the money to buy one. So it's just a catch 22. I still cant come to the fact that it's gone and most likely I'm not gonna be able to get another one and if possible it wouldn't be for a long while I'd be able to get the money up. Please everyone just be on point I dont want to see this happen to any of you. Take care and God bless.
Bro mine got stolen too I went inside to work on my back sprocket and like 20-30 mins later I went back out and it was gone and I still haven’t found it to this day it’s ruff man I feel ur pain but I’m getting a new one I hope you get one too god Bless brother
I did this video series as well and it’s super fun to see the subscribers builds If you do another one of these videos I will send my bikes in for you to look at
The BT80 is the ultimate commuter engine IMO. I'd still be using one if it wasn't due to parts availability being so hit and miss. They definitely have a lot more low end torque than a standard CG, are much smoother running, and will rev pretty well also. With a larger carb and a better exhaust, I had little trouble hitting 40mph. The oil bath centrifugal clutch is extremely smooth, and the 60 watt 6 pole stator allows you to run plenty of universal 12V motorcycle lighting and other goodies.
Thanks. I’ll check out Gemini wheels as I was looking for a more heavy duty wheel. To answer the question, it’s a gen 2 phantom. I did switch it to a wide needle bearing for the piston. It has survived the year so far. The Dlh budget clutch been as expected, but I have broken and couple of clutch cables with it from the more pull pressure.
Thanks for the feedback. Hopefully the hydraulic clutches start selling separately. I think they MIGHT eliminate the cable and clutch cam issues on high pressure systems.
Thanks for the shoutout! I’ve since fixed the running issues, however my back wheel had a snapped axel at some point. Plan to repair the stingray in the near future!
i finished my bike a couple weeks ago and finally got all the road legal parts of it working(front running lights, rear tail light, turning lights, break light, head light, horn and speedometer). gonna be replacing the turn signal switch after finding out how garbage it is unless ur riding on brand new flat roads. ill make a video once my dad gets back from europe(hes the electronics expert lol)
Nice sounds real good I'm from the Caribbean planning on building a new one (killed my first wasn't mature to understand alot). But I plan on doing same as u adding full lights (front rear turn signals.) But how did u go about doing brake lights? (I was this of adding a tactile button on lever so when I gonna hold I push the bottom one time
Excuse me LA Hover Bikes. If I may respectfully add: Each individual part of a bicycle's frame is weak. Correctly assembled together they form a strong unit. If any part is altered, the frame is compromised and can lead to failure. I appreciate the insightful information in your videos, and it is good to hear that your father is feeling good enough to travel to a foreign country. Thank you.
I'm in your neck of the woods driving my motorized bike around the same paths and Roads you take hopefully I run into you I've been out everyday hoping to run into you just to say hi I'm a fan and thank you for introducing me to this Hobby it changed my life
Nice! Feel free to hit me up on discord if you want to meet up for a quick cruise (server link is in the description). I'm out riding something everyday.
@@LAHover yeah absolutely I'm back in my neck of the woods in Pennsylvania but when I'm back around there I'm definitely hitting you up on Discord plus I didn't want to freak you out thinking I'm a stalker or a weirdo that's another reason why I didn't hit you up I was just hoping to run into you that would have been cool
This is so cool! Its really cool to see others builds and the little tips and tricks others have. Definitely an awesome video. My janky fuel filter i ordered a metal truck filter to replace it
I watch your videos and builds on a daily basis I'm building another one I just built one a week and a half ago that is awesome and it flies that's my everyday bike now but I'm building a more expensive one next
Hey first I really enjoyed the overall edit to this video, and I think the idea behind the video is awesome. I didn't know about this until you post the video ut I'll def try to put up a clip of one of my bikes for the next one. Very cool brother.
Thank you for your inputs! It really helps! Actually one of my biggest issue is the engine, yes its fast and torquey but the vibration is bad esp on low to mid rpms, I did a 100km round trip on this bike on one of my videos and I can tell you after that ride my hands were numb, as for the chain tensioner i had bad experience of the chain locking in on the drive sprocket and almost had an accident, so thats why I placed an arch tensioner and a spring loaded tensioner for extra peace of mind although on a new build that I made recently I was able to adjust the chain enough for both the pedal and engine side to be tensioned equally without using any tensioners, im guessing i can do the same to the Indian. Btw I also agree with your other suggestions on how to smooth out the engine and it was a great input! anyways, God Bless you! Mabuhay! 🇺🇸🇵🇭
I got to get off my butt and make a video of my build. Mainly not to show off but to see if there is an issue that should be addressed. My main concern is my brakes. I got a huffy Cranbrook frame so there no disk attachments. I used the adapter to install cause I bought the wheelset from bike berry and the back disk was making contact with frame so basically I got front brakes only and they tend to rock back and forth alittle making me think they are sketchy at best.
I really wish my build was featured on this... almost at the finish line for my hybrid build.. how can I submit my build for your opinion? would be greatly appreciated!!
1:58 it looks like your bike has a tail in the shadow on the ground, lol just couldn't stop starring at it and was laughin cause it obviously wasn't a tail but it just looked it in that shot.
I was sent a 'Motos' motor kit when I'd ordered a standard 66cc kit and haven't used it yet.It does read as 47mm bore so it must be right.Other than cleaning the ports well,and of course making sure the wires are right,are there any tips?Thanks in advance.
I've got three of these two stroke gas powered 80cc I believe they all kick ass quite reliable polished ported performance carburetor by one topped out at 52 mph a little f****** scary but I still had throttle left
People said that a ported cylinder is useless without a reed valve and that it will run bad. Do you know if that's true? Also, how much does sanding the cylinder to tighten the squish gap help with power?
Because I don't want to do heavy modifications and big calculations but I just want more power. Mine topped out at 40mph now, I'm using a pwk 21mm carb now (it's not correctly rejetted so I might get a little more top speed if I do that). also, I've been sanding down my cylinder a little bit before but it takes alot of time, only got off about 1/3th mm so I have to do it again, last time it didn't cause any problems and it still had a tight sealing. But I think it should have a squish gap of about 0.7mm, and it's now 3😂
I wish that was able to post a video of mine. A 1964 Schwinn built for two tandem with the chain gard, chopped the back crank arms and back seat post tube, BMX bullhead handle bars with the double pull thumb throttle Minerva front disc brake, on a26 inch heavy duty spoked chrome rim, bontrager street ripper front tire. Custom built seat post with a Nel luso recovered seat. The motor is a yd 100 bottom ported and polished not yet balanced crank with an intake skirted piston and wrist pin stays for keeping the bearings centered, ld100 open port cylinder ported with the billet higher performance head decked. Ngk plug. Stand alone cdi and separate sparkplug coil.pk80 style. Hp carb rejected with custom hole size @75? with a self designed 3d printed velocity stack. Slightly retarded timing thanks to a magneto magnet custom cut 4° back. 1 1/3 of 2 415 chains, motor mounted chain tensioner and two chassis rollers due to length ( soon to be welded on ) hooked to a 38 tooth back sprocket with the billet clamp on hub adapter on a hd back chrome rim with a black 2.4 liter gas tank with gold scroll Hardley davidson tank emblem ... Yes harDley davidson... with black anodized fuel filter. It looks and rides like a drag bike and I had to take the 36 volt electric front hub off of it because it was quick and sketchy to ride. I've never seen anybody build a bike like it. On my first ride out I had three people stopped me and asked me to build them one which I have yet to do.
Oh and a ported f2 thrust pipe that's been cut and welded to blow down and away from the rear tire... With a baffle can on the end. It sounds like my friends sons little 80 dirt bike mostly... Lol!
With the 36 volt hub front hub on I could reach 25 mph in 4.5 seconds and no I never gave it full throttle and everything it had because it was too fast.
I have some issues I have a new amazon China doll it still in break in period and I added a mz65 expansion chamber and it got up to 65.6mph and I let off the throttle and it died shortly after that. I tried starting it again with no luck. Any ideas?
Id love to find the person who stole my 16 hp occ stingray chopper. I live about an hours drive south of Kansas city, Kansas. They dropped their cell phone in my yard at the scene of the crime! It had a honda rebel gas tank and ape hanger handlebars and a Harley bobber seat. If anyone knows who stole it Id advise them to return it before I hack their phone and make them pay (soda and pizza 4 life) for it severely! 😁 Oh, tell em I said how you like me now that I posted their personal data over to the popo! 🤘😯
@@LAHover I wont give out details but they dont know their paying for cuz Im nickle and dimimg their account! Now who stole from who? Sort of fair play, huh! Can you do a saftey and security video in the future as times are getting tough. So some people feel the need to steal others hard earned projects! Good job on the channel bro! Wish I had the ambition for this that you apparently have.
@@LAHover Thanks you so much, i really want to make 1k subs and i had no video ideas until now, my channel is kinda unique, In my country, i am the only one who does trafic videos 👍 Hello from Romania 🇷🇴
Both of mine have yd-100 cranks. They opened the connecting rod on new ones but still a yd... Both cases also have the YD badges, it's a yd100 bottom-end through and through.
as far as putting one of these together should be mechanically inclined and have a shop because these Chinese bikes all that I've made require additional strengthening welding and small modifications to work properly but all in all I wouldn't give mine up burnouts at lights are exceptionally fun people wonder what the f*** is going on
Present 🙋👍 I'm taking full credit.. I have awsome skill at cutting to the chase. Getting to the point. No fuss no miss. Data that is comprehensive. Exciting,shocked and I subscribed athe holy grail for motorized bike newbee (me) to ??? Who knows what's next😁thanks so much. I am a motorized bike rider 😄for life😃
Totally off topic but is anyone else having issues with their new zeda 80s like the 3 that I picked up recently have all destroyed their stock cylinder head they run perfectly fine with a high compression head but it’s just the stock heads
Hi LA hover i will be posting motorised bike paragliding vids soon n still dealing with cops about my other motorised bike n motorised push scooter will let you know how court case is going ok keep safe all 😃👍
Hey man, I got 2 channels with most of my videos being taken down. I would like to see you rate my builds and say how you like our Czech countryside, hehe.
Dude I'm still getting new phantom engines 🤬 but I had someone reply and said his is still doing good on his 1st one .dnt know what gen he is talking Abt but I asked where he got it from trying to see different sellers are getting it from different manufacturers
@@LAHover is it just a plug and play type set up or do I have order other stuff bud? I dnt mind I just dnt kn what to get and it seems like no one knows or dnt want to tell?? I just want to keep ordering shit and it dnr fit and then have to wait and keep doing it
That first one looks so much like a late 70s cb750 it’s not even funny And I really don’t think there is any amount of power in an 85cc chainsaw motor. I think the normal wear and tear that a bike sees on a normal day is probably harder than any of these little motors will be on the hubs, frame, etc. just my 2 cents. That said I think tires are the part you need to not skimp on. Make sure they’re not dry rotted and such. Dont trust off-road tires on the road for extreme leaning and such.
Thank you all for your build submissions. Too many for one video, but I will get to all of you in future audits. Stay safe out there Builders!
I have a 1970s stingray with a yd100 on it, it had the super pk80 but I had to pull it off for maintenance. Before I pulled it off I could cruise around at 37 and hit 40 once or twice with a 28t sprocket first run with the yd on a horrible tune got up to 32 at very low rpms but I only weigh about 130 as well 😂. I really wish I could get my channel off the ground I've got all different motors and bike sizes well a few. I also have both the 79cc four stroke and the bt80 and they are quite similar takeoff is much smoother with the bt80 tho for sure. That bt80 is a very underestimated motor imo.
Where can I submit mine? I didn't know about this and would have loved to show my Jasper!
Keep an eye on the next few audit videos. When I catch up on the ones I currently have I'll announce new submissions.
@@p.k.motorsports5104 yes, the BT80 is very underestimated. I have one on a Hyper Commute.
I got three rides I'd like to share, a BT80 powered Hyper Commute, Phantom 85 powered Schwinn Frontier, and a Phatmoto All Terrain. I have daily driven all three to and from work, and I always have people talking about them, or wanting one themselves.
Thanks for the shout out the only thing I want to add is my sprocket in the back is actually a 40 tooth. not a 36 and I still plan on riding the bikes just in less populated areas.
I like this type of video it was really cool to see everybody else's builds!
I'm definitely OG I remember all your drone videos.
heyo from cenla!
for the split m65 clones, honestly depending on how stiff your retainer springs on, it can sometimes be easier to just remove the header entirely rather than fight with the retaining springs to release. That being said, the split design does allow more flexibility to mounting to frame/angling the exhaust without having to use a torch to bend it.
To everyone out there I just want to say be careful with your Motorized bikes at stores. Yesterday my Motorized bike was stolen from outside of harbor freight. I wasn't in there no longer than 10 minitues.The guy cut the lock off my bike left his piece of shit bike there and left with my custom bike that was priceless to me being all the hours I spent making it my own. And if the police would of went after the guy after they seen on camera the way he went down the highway I'd have my bike right now. I'm so mad at how they handled the situation, now if it happened to someone they knew or if the guy had a gun, or even probably if it was a car that got stolen they probably would of actually did there job. I was homeless for 4 and a half years in the woods in a tent about 6 months ago. I was just getting my life back in order. And my only transportation and only thing I have besides a cheap rc car is gone. And for me to try and make money to somehow get another is in possible cause I need one to get to jobs to make the money to buy one. So it's just a catch 22. I still cant come to the fact that it's gone and most likely I'm not gonna be able to get another one and if possible it wouldn't be for a long while I'd be able to get the money up. Please everyone just be on point I dont want to see this happen to any of you. Take care and God bless.
The bike community is generous maybe a listener will help you.
Bro mine got stolen too I went inside to work on my back sprocket and like 20-30 mins later I went back out and it was gone and I still haven’t found it to this day it’s ruff man I feel ur pain but I’m getting a new one I hope you get one too god Bless brother
I am sorry to hear that
I like this new series and my favorite by far had to be the Indian styled bike from the Philippines .
Love that intro… nice road….
I did this video series as well and it’s super fun to see the subscribers builds If you do another one of these videos I will send my bikes in for you to look at
The BT80 is the ultimate commuter engine IMO. I'd still be using one if it wasn't due to parts availability being so hit and miss. They definitely have a lot more low end torque than a standard CG, are much smoother running, and will rev pretty well also. With a larger carb and a better exhaust, I had little trouble hitting 40mph. The oil bath centrifugal clutch is extremely smooth, and the 60 watt 6 pole stator allows you to run plenty of universal 12V motorcycle lighting and other goodies.
The charging system is what really has me interested!
Thanks. I’ll check out Gemini wheels as I was looking for a more heavy duty wheel. To answer the question, it’s a gen 2 phantom. I did switch it to a wide needle bearing for the piston. It has survived the year so far. The Dlh budget clutch been as expected, but I have broken and couple of clutch cables with it from the more pull pressure.
Thanks for the feedback. Hopefully the hydraulic clutches start selling separately. I think they MIGHT eliminate the cable and clutch cam issues on high pressure systems.
your bike was by far the coolest looking bike I've ever seen
Thank you! I appreciate your feature! 🙏🙏
Don't know why I said exhaust instead of enthusiasts lol... My bad :P
It's okay bro! I appreciate you I'll post for part 3 ms460 on mongoose road bike! 55mph
Thanks for the shoutout! I’ve since fixed the running issues, however my back wheel had a snapped axel at some point. Plan to repair the stingray in the near future!
What do you think 3 a three speed rear alxe on a beach cruiser do I need to remove the coaster break
i finished my bike a couple weeks ago and finally got all the road legal parts of it working(front running lights, rear tail light, turning lights, break light, head light, horn and speedometer). gonna be replacing the turn signal switch after finding out how garbage it is unless ur riding on brand new flat roads. ill make a video once my dad gets back from europe(hes the electronics expert lol)
Nice sounds real good I'm from the Caribbean planning on building a new one (killed my first wasn't mature to understand alot).
But I plan on doing same as u adding full lights (front rear turn signals.) But how did u go about doing brake lights? (I was this of adding a tactile button on lever so when I gonna hold I push the bottom one time
Sean outrunning Amos uphill on a stock coaster break cranny with a bolt for a pedal😂
Great vid and awesome entries!!
Excuse me LA Hover Bikes. If I may respectfully add: Each individual part of a bicycle's frame is weak. Correctly assembled together they form a strong unit. If any part is altered, the frame is compromised and can lead to failure. I appreciate the insightful information in your videos, and it is good to hear that your father is feeling good enough to travel to a foreign country. Thank you.
I can't wait to start my 4 stroke build 😁
I'm in your neck of the woods driving my motorized bike around the same paths and Roads you take hopefully I run into you I've been out everyday hoping to run into you just to say hi I'm a fan and thank you for introducing me to this Hobby it changed my life
Nice! Feel free to hit me up on discord if you want to meet up for a quick cruise (server link is in the description). I'm out riding something everyday.
@@LAHover yeah absolutely I'm back in my neck of the woods in Pennsylvania but when I'm back around there I'm definitely hitting you up on Discord plus I didn't want to freak you out thinking I'm a stalker or a weirdo that's another reason why I didn't hit you up I was just hoping to run into you that would have been cool
@@LAHover come subscribe to my UA-cam channel Follow Me If You Can we'll keep in touch next time I'm out there I'll hit you up
Dang it!, forgot about this lol! Maybe next time. Nice video as always.
This is awesome. Very educational.
This is so cool! Its really cool to see others builds and the little tips and tricks others have. Definitely an awesome video.
My janky fuel filter i ordered a metal truck filter to replace it
Some good looking builds.Thanks for sharing them everyone,and of course you LA.
I watch your videos and builds on a daily basis I'm building another one I just built one a week and a half ago that is awesome and it flies that's my everyday bike now but I'm building a more expensive one next
Hey first I really enjoyed the overall edit to this video, and I think the idea behind the video is awesome. I didn't know about this until you post the video ut I'll def try to put up a clip of one of my bikes for the next one. Very cool brother.
Thanks, I'll announce new submission in the next 1-2 audits. Would love to have one of your builds on here for sure!
@@LAHover ok awesome I'll keep an eye out for the announcement.
Thank you for your inputs! It really helps! Actually one of my biggest issue is the engine, yes its fast and torquey but the vibration is bad esp on low to mid rpms, I did a 100km round trip on this bike on one of my videos and I can tell you after that ride my hands were numb, as for the chain tensioner i had bad experience of the chain locking in on the drive sprocket and almost had an accident, so thats why I placed an arch tensioner and a spring loaded tensioner for extra peace of mind although on a new build that I made recently I was able to adjust the chain enough for both the pedal and engine side to be tensioned equally without using any tensioners, im guessing i can do the same to the Indian. Btw I also agree with your other suggestions on how to smooth out the engine and it was a great input! anyways, God Bless you! Mabuhay! 🇺🇸🇵🇭
What are motoast motors I'm asking because I received mine and it seems pretty good
Makes me wanna show my 2, an old 50cc, and a new 70cc
I got to get off my butt and make a video of my build. Mainly not to show off but to see if there is an issue that should be addressed. My main concern is my brakes. I got a huffy Cranbrook frame so there no disk attachments. I used the adapter to install cause I bought the wheelset from bike berry and the back disk was making contact with frame so basically I got front brakes only and they tend to rock back and forth alittle making me think they are sketchy at best.
Where did you get the handlebars for the f zero .I been wanting to change them
Because the F-Zero uses dual steams, I took some stock bars from an old Huffy Cranbrook and cut them in half. Worked great.
I really wish my build was featured on this... almost at the finish line for my hybrid build.. how can I submit my build for your opinion? would be greatly appreciated!!
When I catch up on the list I have I'll be announcing new submissions. Keep an eye on the next few audit videos for the announcement.
1:58 it looks like your bike has a tail in the shadow on the ground, lol just couldn't stop starring at it and was laughin cause it obviously wasn't a tail but it just looked it in that shot.
Lmao... Your right lol
I was sent a 'Motos' motor kit when I'd ordered a standard 66cc kit and haven't used it yet.It does read as 47mm bore so it must be right.Other than cleaning the ports well,and of course making sure the wires are right,are there any tips?Thanks in advance.
Fix the fuel valve on the tank. I had mine pop off twice
Can't wait to see what you have to say about the ole Blastinator shtbox 3000! LoL
Lol, looking forward to it because your riding style is realistic for the bike. And I alway love seeing a true daily driver that does it job well!
I've got three of these two stroke gas powered 80cc I believe they all kick ass quite reliable polished ported performance carburetor by one topped out at 52 mph a little f****** scary but I still had throttle left
People said that a ported cylinder is useless without a reed valve and that it will run bad. Do you know if that's true? Also, how much does sanding the cylinder to tighten the squish gap help with power?
Because I don't want to do heavy modifications and big calculations but I just want more power. Mine topped out at 40mph now, I'm using a pwk 21mm carb now (it's not correctly rejetted so I might get a little more top speed if I do that). also, I've been sanding down my cylinder a little bit before but it takes alot of time, only got off about 1/3th mm so I have to do it again, last time it didn't cause any problems and it still had a tight sealing. But I think it should have a squish gap of about 0.7mm, and it's now 3😂
Also the cops never mess with me I drive it everyday to work and back! And pass cops all the time new mexico is very chill
Nice!
literally saw the remake stingrays in stock last night. dont know if u got the cash but they are there
And thanks to you I now have one on the way!
SWEET! good looking out man :)
@@LAHover no problem. love your vides. your really informative. ive leared alot thank you
The 10 spoke mag wheels don't give any problems the only one that have give problem are the cheap 5 spoke mag wheels
Wtf is he calling that bike? Ilusou?? Can’t find on google.
Rich is the best oil for mortorize bicycle
I have a yd 100 and I have been wondering if I could put a electric motor on the front will like a switch cit for example
Dang. Now I’ve got to make my bike nice so I can try to get on here! Eh. Something to aim for I guess
I wish that was able to post a video of mine. A 1964 Schwinn built for two tandem with the chain gard, chopped the back crank arms and back seat post tube, BMX bullhead handle bars with the double pull thumb throttle Minerva front disc brake, on a26 inch heavy duty spoked chrome rim, bontrager street ripper front tire. Custom built seat post with a Nel luso recovered seat.
The motor is a yd 100 bottom ported and polished not yet balanced crank with an intake skirted piston and wrist pin stays for keeping the bearings centered, ld100 open port cylinder ported with the billet higher performance head decked. Ngk plug. Stand alone cdi and separate sparkplug coil.pk80 style. Hp carb rejected with custom hole size @75? with a self designed 3d printed velocity stack. Slightly retarded timing thanks to a magneto magnet custom cut 4° back. 1 1/3 of 2 415 chains, motor mounted chain tensioner and two chassis rollers due to length ( soon to be welded on ) hooked to a 38 tooth back sprocket with the billet clamp on hub adapter on a hd back chrome rim with a black 2.4 liter gas tank with gold scroll Hardley davidson tank emblem ... Yes harDley davidson... with black anodized fuel filter.
It looks and rides like a drag bike and I had to take the 36 volt electric front hub off of it because it was quick and sketchy to ride. I've never seen anybody build a bike like it. On my first ride out I had three people stopped me and asked me to build them one which I have yet to do.
Oh and a ported f2 thrust pipe that's been cut and welded to blow down and away from the rear tire... With a baffle can on the end. It sounds like my friends sons little 80 dirt bike mostly... Lol!
The front forks are Manitou adjustable oil dampening shocks and the wheelbase on it is 55 inches
With the 36 volt hub front hub on I could reach 25 mph in 4.5 seconds and no I never gave it full throttle and everything it had because it was too fast.
that tank looks like it could hold 2-1/2 gallons
I have some issues I have a new amazon China doll it still in break in period and I added a mz65 expansion chamber and it got up to 65.6mph and I let off the throttle and it died shortly after that. I tried starting it again with no luck. Any ideas?
Id love to find the person who stole my 16 hp occ stingray chopper. I live about an hours drive south of Kansas city, Kansas. They dropped their cell phone in my yard at the scene of the crime! It had a honda rebel gas tank and ape hanger handlebars and a Harley bobber seat. If anyone knows who stole it Id advise them to return it before I hack their phone and make them pay (soda and pizza 4 life) for it severely! 😁 Oh, tell em I said how you like me now that I posted their personal data over to the popo! 🤘😯
Oh man... I hope the phone was expensive too!
@@LAHover I wont give out details but they dont know their paying for cuz Im nickle and dimimg their account! Now who stole from who? Sort of fair play, huh! Can you do a saftey and security video in the future as times are getting tough. So some people feel the need to steal others hard earned projects! Good job on the channel bro! Wish I had the ambition for this that you apparently have.
@@EMNM22 o
Can i do a series like this on my channel? It's that ok with you or i'm copying too much?
This was requested by some of my viewers. The idea is not mine to copy :)
Go for it!
@@LAHover Thanks you so much, i really want to make 1k subs and i had no video ideas until now, my channel is kinda unique, In my country, i am the only one who does trafic videos 👍 Hello from Romania 🇷🇴
@Chad Stewart Thanks man 👍
Ah dangit i forgot to send in mine :( Do you think you'll be doing this kind of thing again?
nevermind i just finished watching the video :)
When I catch up, I'll announce new submission request the video along with a community post. :)
10:55 they changed the crank and it's not a yd100 and the bottom case is the cheapest case you can think of
Both of mine have yd-100 cranks. They opened the connecting rod on new ones but still a yd...
Both cases also have the YD badges, it's a yd100 bottom-end through and through.
as far as putting one of these together should be mechanically inclined and have a shop because these Chinese bikes all that I've made require additional strengthening welding and small modifications to work properly but all in all I wouldn't give mine up burnouts at lights are exceptionally fun people wonder what the f*** is going on
what about the skyhawkgt5a
Present 🙋👍 I'm taking full credit.. I have awsome skill at cutting to the chase. Getting to the point. No fuss no miss. Data that is comprehensive. Exciting,shocked and I subscribed athe holy grail for motorized bike newbee (me) to ??? Who knows what's next😁thanks so much. I am a motorized bike rider 😄for life😃
P.s. I'm determined to gethis gx120 on my full suspension super V 900🤔 willing to go total Akira bike motor bike.
Totally off topic but is anyone else having issues with their new zeda 80s like the 3 that I picked up recently have all destroyed their stock cylinder head they run perfectly fine with a high compression head but it’s just the stock heads
Hi LA hover i will be posting motorised bike paragliding vids soon n still dealing with cops about my other motorised bike n motorised push scooter will let you know how court case is going ok keep safe all 😃👍
Hey man, I got 2 channels with most of my videos being taken down. I would like to see you rate my builds and say how you like our Czech countryside, hehe.
Keep an eye on the next audits. I'll be announcing when I'm ready to take new video submissions.
Dude I'm still getting new phantom engines 🤬 but I had someone reply and said his is still doing good on his 1st one .dnt know what gen he is talking Abt but I asked where he got it from trying to see different sellers are getting it from different manufacturers
Ms460 piston swap has been working well for me ;)
@@LAHover is it just a plug and play type set up or do I have order other stuff bud? I dnt mind I just dnt kn what to get and it seems like no one knows or dnt want to tell?? I just want to keep ordering shit and it dnr fit and then have to wait and keep doing it
@@LAHover I have the screenshot of the kit I wanted to get but really csmt find anyone whos running em and if I do they msg back
@@joneserupinsmoke9161 ua-cam.com/video/6uICMkcc97g/v-deo.html
Consider adding a motorized bike section to your discord the minarelli obsessed money pit section has nothing for me
That first one looks so much like a late 70s cb750 it’s not even funny
And I really don’t think there is any amount of power in an 85cc chainsaw motor. I think the normal wear and tear that a bike sees on a normal day is probably harder than any of these little motors will be on the hubs, frame, etc. just my 2 cents.
That said I think tires are the part you need to not skimp on. Make sure they’re not dry rotted and such. Dont trust off-road tires on the road for extreme leaning and such.
Do one on mee🤣
😛
I had that 2-piece mz clone.. it's shit, it leaks oil and smoke and it does not sound good.
Completely unrelated to the video but what is your discord? I'd like to join it if it is public