the REVs really responded well to dropping the airbox and putting K&N filters in place. about 5lbs lighter, more space under hood, cleaner air to the carps/TBs, and no powder bog.
The foam btw has a small amount of foil on it... that foil is aircraft heat shielding... with out it your exhaust will melt you cowl even with all the swiss cheesing you have done, also depending on how the air box is plumed, it can be an air filter. IMO I highly recommend getting Dynomat with foil and putting it back on the exhaust side.
One thing I've done is on the right side inside the panel there is room to fit two quarts of oil in their containers. Right in front of where he cut out the piece for his boot. You may have to put a simple piece of metal in there to keep them in place. Why pay for oil at gas stations when you can bring your own for the day.
Good question! If it's not coated with a reflective material then probably not, if is is open cell foam then it is just for sound dampening as far as I know.
Hello I hope you get this message and can answer my question, on my 2003 MXZ 800 I'll be driving along and it will just lose spark on one side like it fouled the plug but if I keep riding it fast and slow you know I change my Pace my RPM then it will actually come back it doesn't appear to be a spark plug AT ALL because when it comes back it runs perfectly fine like nothing was ever wrong. It pulls the skis right off the ground and it'll ride a wheelie again.
Yes, but it made ABSOLUTELY no difference at all.. I checked back with old and new plugs, on the trail when this happens there was no difference between all four plugs they all sparked or didn't spark on that one side I forget which side it was.
Would I be able to take the foam out of the hood on my 05 m6 without melting my hood. There is also foam on the exhaust side sidepanel. would I be able to take out the foam and put back head tape?
I've got a 99 formula z 500, the tunnel is just full of huge chucks of ice would u suggest cutting a couple of holes into the running boards? I'm afraid if I don't get those ice chunck out of there soon my running boads are going to bend and dent
I don't know what vid to ask this but I have a very loud drone on my skidoo 1200 we. goes away at speeds above 45 or 50. exhaust I am thinking but rattles you brains. all stock btw.
My snowmobile is on steroids basically 1997 arctic cat cougar 550 80 hp and 99mph top speed I put a cold air ram intake and a supercharger it has racing primary and secondary clutches it has been geared at a race shop I cut extra hood vents screened everything raised bars plastic skis headlight delete obviously took the 2up seat off and put a single person seat on new front shocks completely new lighter skid rear suspension and 2 inch paddles increased compression cut open muffler took every restrictive thing out welded it back together makes 207hp on a dyno hits 144mph
and to the person in the video, Does dropping 15lb with 325Kmh tops speeds really necessary? Are you going for the modified world record? Because your going to need a lot more then weight loss to take that, honestly you just wrecked a perfectly good sled imo, and they make Yamahas, Polaris or T cats for that, and if you need 325KMH just drop the engine in and find a freaking chain case, or belt to meshs it up. This is said, for just going out and wrecking a sled in back country for laughs.
Everything your do is for removing weight but it’s not gonna make your experience better, it’ll make it worse. Removing your headlights makes you not able to drive at night and the only benefit is removing weight but why sacrifice being able to drive whenever you want for some weight?
Infront of the meme the sled weighs 447 pounds trust me it is awrsome....and i dont drive at night i dont enjoy driving at night. it also has probably the best suspension ever made...and it is 20 or more pounds lighter than stock.
I own a 2007 550f mxz and I do some riding at night with it so I don’t really need to take them out, It’s pretty light already. I have no foam in the hood since I bought it from a Kijiji seller and he had taken it out
Well it's what I want to do right - because it's my channel. It costs a lot of money to make these vids and I have to pwork to pay the whole thing off! Take care bud.
@@PowerModzOfficial I understand that but like there is 0 videos and 0 content basically now lol.. so are you just not doing it anymore or not making money from it anymore? It seemed like you were doing good with the channel then nothing.
the REVs really responded well to dropping the airbox and putting K&N filters in place. about 5lbs lighter, more space under hood, cleaner air to the carps/TBs, and no powder bog.
Wow that’s totally wrong!! Why would you want to draw warm air from under the hood?
The foam btw has a small amount of foil on it... that foil is aircraft heat shielding... with out it your exhaust will melt you cowl even with all the swiss cheesing you have done, also depending on how the air box is plumed, it can be an air filter. IMO I highly recommend getting Dynomat with foil and putting it back on the exhaust side.
thats what i use.
I'm not going to tell you what to do - but I know what I would do:) Just make sure that the foam isn't acting as heat shielding.
Hey i love your vids, I am a kid and love sledding and these are my favorite vids and i agree.
can you make a rev xp mod video
Do those cut outside save your sled from overheating especially on summits etc? How effective is it?
One thing I've done is on the right side inside the panel there is room to fit two quarts of oil in their containers. Right in front of where he cut out the piece for his boot. You may have to put a simple piece of metal in there to keep them in place. Why pay for oil at gas stations when you can bring your own for the day.
That might hurt resale 😂
they're already dirt cheap 🤷♂️
what happend to all your Older videos before this?
One thing you could do the adds weight but saves weight would have been powdercoating the tunnel!
could screen door screen work
Yes because it's pretty much miqueto netting
how did you get the mesh to stick or stay under the headlight cover
i just bout a 05 rev 600 sdi and i have a ggb can it and it gets loaded up and runs like poo and runs perfect on the stock exhaust
Where did you get your hoods from
lmao just cut holes every where. rip off any extra features ,for 10 pounds 15? rather have lights
I dont need to get rid of the heat near my exhaust... there's a hole beside the exhaust lmao, burnt the plastic a bit xD
my sled is a lot wider longer and lower are all these new sleds soo slim like that
Great video! Should i remove the foam on the rev xp chassis to?
Ive got a 1999 artic cat 700, i really just need a livht other than that i just want it as light as possible, any suggestions?
Hey you always have great tips. You think you could make a video like this for the rzr? I'd appreciate it. Thanks
I WANT A REV!
you like the shocks you got on there now
hey Louis, is the foam not also there to prevent the plastics from melting ???
Good question! If it's not coated with a reflective material then probably not, if is is open cell foam then it is just for sound dampening as far as I know.
PowerModz
If it has any coating on it... you might want to re think this...
***** yes - as I said above - reflective material. Thanks for watching!
whats a snow bungie??????? it you answer that would be nice thanks -garagemods
Hello I hope you get this message and can answer my question, on my 2003 MXZ 800 I'll be driving along and it will just lose spark on one side like it fouled the plug but if I keep riding it fast and slow you know I change my Pace my RPM then it will actually come back it doesn't appear to be a spark plug AT ALL because when it comes back it runs perfectly fine like nothing was ever wrong. It pulls the skis right off the ground and it'll ride a wheelie again.
new plugs?
Yes, but it made ABSOLUTELY no difference at all.. I checked back with old and new plugs, on the trail when this happens there was no difference between all four plugs they all sparked or didn't spark on that one side I forget which side it was.
What seat is that
Could you do the same video but for the zx chassis
Hey is there a way u can send me some sticker s like its I would love to put some on my sled
What did you all have to do for the headlight delete?
Would I be able to take the foam out of the hood on my 05 m6 without melting my hood. There is also foam on the exhaust side sidepanel. would I be able to take out the foam and put back head tape?
Great video!!
do one of these vids for the iqr !
Did you paint the hood? I see scratches and I looks like it use to be green
No snow gets in by the clutches with the venting you put ? Nice vid.
Jacob Naeyaert very little but never affects the clutches
Which skins seat did you use.? Can't find one for 04 rev 600
How did you attatch the screen mesh to the hood around the headlight holes?
what kind of screen material (mesh) are you using?
My 07 blizzard has 90% of the thing he pointed out
lol they all do right!
I've got a 99 formula z 500, the tunnel is just full of huge chucks of ice would u suggest cutting a couple of holes into the running boards? I'm afraid if I don't get those ice chunck out of there soon my running boads are going to bend and dent
I left all the ice chunks in mine and it didn't bend for me but ima do the running board mod so all the snow drops out
what vent kit is that for the sides?
WRP
Do you have any tips or advice for painting the side panels on a rev? like the best paint?
so it stays? no such thing - i use krylon - i like the ratty look!
where do you get the vent kit
As an upholsterer... that sloppy seat cover is messing with my O.C.D.
lol sorry!
@@PowerModzOfficial Great vid though... just picked up my 1st REV
You need the pipe to be hot for good preformance
Very true!
that plastic tube definitely git melted right after this video by the exhaust
hey how did you make your running boards and stuff? is there a video?
hein racing!
oh so i can just buy them ? if so do you have a link?? :))
Like to see a mod update on the 2008 HillClimb
509 films! check them out! They sell goggles and helmets and produce amazing sled flicks!
What is a snow bungee?
It's a "rope" used for pulling a stuck snowmobile out of the snow! With another snowmobile ofcourse.
Hampus Olsson Thanks!
MXRiderForLife they also have ones with handles
I don't know what vid to ask this but I have a very loud drone on my skidoo 1200 we. goes away at speeds above 45 or 50. exhaust I am thinking but rattles you brains. all stock btw.
what did you use to attach the screen to cover the headlight holes louie? thanks!
Just clear silicone
Wonderimg where i can get one of those vents for the hood for my rev
Fog skinz
My snowmobile is on steroids basically 1997 arctic cat cougar 550 80 hp and 99mph top speed I put a cold air ram intake and a supercharger it has racing primary and secondary clutches it has been geared at a race shop I cut extra hood vents screened everything raised bars plastic skis headlight delete obviously took the 2up seat off and put a single person seat on new front shocks completely new lighter skid rear suspension and 2 inch paddles increased compression cut open muffler took every restrictive thing out welded it back together makes 207hp on a dyno hits 144mph
they make snowmobile helmets, goggles, etc.
Do you know if I delete my electric start on my 500ss 2009 i still have my reverse?
David Drouin yes of course
PowerModz can i do it without pulling the engine out of the chassis
how aboot canada eh
I used screening where some of my honeycomb fell out now i know its a pro (power)mod(z) lol
What bars are those?
free ride bars off a 2012
I have a 2003 ski doo rev 600 and I am wondering if I need another cooler if I want to put a beavertail delete kit on it. Let me know anyone. Thanx
Look it up on dootalk.com Many people add more coolers and many say it depends on snow conditions. Tons of people with vast knowledge on there!
thanks
and to the person in the video, Does dropping 15lb with 325Kmh tops speeds really necessary? Are you going for the modified world record? Because your going to need a lot more then weight loss to take that, honestly you just wrecked a perfectly good sled imo, and they make Yamahas, Polaris or T cats for that, and if you need 325KMH just drop the engine in and find a freaking chain case, or belt to meshs it up. This is said, for just going out and wrecking a sled in back country for laughs.
Hey great question thanks for watching!
Well, the sled did have 36,000 km on it so it was on its last leg. Louis can do whatever he wants to do to that sled because its his
PowerModz ehh you Canadian
Check out snobunje.com!
Old school intro :).
Not in the budget!
Everything your do is for removing weight but it’s not gonna make your experience better, it’ll make it worse. Removing your headlights makes you not able to drive at night and the only benefit is removing weight but why sacrifice being able to drive whenever you want for some weight?
Infront of the meme the sled weighs 447 pounds trust me it is awrsome....and i dont drive at night i dont enjoy driving at night. it also has probably the best suspension ever made...and it is 20 or more pounds lighter than stock.
I own a 2007 550f mxz and I do some riding at night with it so I don’t really need to take them out, It’s pretty light already. I have no foam in the hood since I bought it from a Kijiji seller and he had taken it out
1:48 that was sketchy
Almost seems like satire....lol
Oh no not heat next to my exhaust!!!!!!!!!!!!! It’ll be fine.
terrible "mods". The title should be "How to wreck a perfectly good sled."
A lot of people disagree with you - but some will agree and I'm cool with that. Thanks for watching!
Andrew Johnson rip perfectly fine mxz
#1 mod for ski doo sleds, unscrew gas cap, junk the rest of the sled, screw gas cap onto a Polaris.
*Arctic Cat*
Lol
Skidoo mxz for life
Polaris is for pussy girls. Oh that's you asshole.
kelly dray how many spare pistons do you bring for a weekend on a poo?🤣
What happened to this channel and this guy? It used to be cool stuff like this and projects etc and now it’s nothing or really weird stuff?
Well it's what I want to do right - because it's my channel. It costs a lot of money to make these vids and I have to pwork to pay the whole thing off! Take care bud.
@@PowerModzOfficial I understand that but like there is 0 videos and 0 content basically now lol.. so are you just not doing it anymore or not making money from it anymore? It seemed like you were doing good with the channel then nothing.
Hack work at best.
thanks for the compliment...ive never purported to be a professional! Thanks for watching!
Just buy a polaris. ; )
Btw you ruined a perfectly good sled. Looks like shit. Wouldn’t pay a penny over 500 for that.
Terrible video. Its little all weight reduction