This video gives the viewer a step-by-step demonstration on how to program (or change the programming of) a start time on a Hunter Pro-C timer/controller.
Rotate the center dial to start times. Once there use the left and/or right arrow buttons to select the different start times (1-4). Once on the desired start time use the + and/or - buttons to move the time up/down. The "OFF" is located between 11:45pm and 12:00am. Repeat for each start time as needed.
Think of it more of a program start time. The zones don’t get their own start time. For a program you set which days to water, a start time (which tells the program when to start watering), then you assign which zones should be on that program. The zones run in sequence beginning at the start time.
@@matthewkrom5898 So I have an 8Oclock start time for ZOne 1, and OFF for 2, 3 and 4. I have run times of 20 mins for each zone. Will that cycle through the 4 zones one time and then stop?
So how do you shut off the other start times.
Rotate the center dial to start times. Once there use the left and/or right arrow buttons to select the different start times (1-4). Once on the desired start time use the + and/or - buttons to move the time up/down. The "OFF" is located between 11:45pm and 12:00am. Repeat for each start time as needed.
So each zone should have the SAME start time?
Think of it more of a program start time. The zones don’t get their own start time. For a program you set which days to water, a start time (which tells the program when to start watering), then you assign which zones should be on that program. The zones run in sequence beginning at the start time.
@@matthewkrom5898 So I have an 8Oclock start time for ZOne 1, and OFF for 2, 3 and 4. I have run times of 20 mins for each zone. Will that cycle through the 4 zones one time and then stop?
@@jdevine42 Yes, as long as the start time and station run times are set to the same Program (there are 3 available programs A,B,C)
How do you make it go off twice a day, once in morning and once in the evening?
@@matthewkrom5898 Thanks much, its working correctly now