Yea the sway bar will hit if u use the djm rk2007 kit which gives u shorter end links which are needed with a 5 inch + rear drop, u just have to move the sway bar mounts over 2 inches to the right
@@Tattooed_lowlyfe okay thanks for the recommendation. I’ll look through your comments again for the exact lowering kit but 3/5. Is your ride bumpy though?
Hp tuned the speed limiter out but the suspension light is still on, you can get resistors wired in the suspension harness and it will turn the light off
Its suspose to insulate the spring noise, it also adds .75 inch to the ride height i slide some heater hose over the top coil and mine doesnt make any noise
Hey, have a question. I'm going to install a suspension like this soon. I aware u would need to get a 4-wheel alignment afterwards. But, do u suggest getting the adjustable panhard bar, rear upper and lower control arms also? I'm asking cause I see some vids when going this low, the rear wheels tend to pull forward. Does u have that issue with the 5/6 drop?
Yes wheels will pull forward and the rearend will not be centered at this drop but its not noticeable with smaller narrow wheels but u will def tell with bigger wider wheels
@@Tattooed_lowlyfe yea, cause Im thinking of going just up to 24's. 26's that low would be a nightmare I'm sure. Just need to figure out a good tire size for the 24"s. Any recommendations?
@@Tattooed_lowlyfe ok, I saw a vid of a guy running that size on a tahoe with 5/7 drop. Well man, I appreciate u responding back. I believe u said u got rid of the Escalaid on another vid of yours. But that thing was bad ass bro! Hope to see some more builds from u in the future bro. Thanks again! 🤘
I mean its a heavy suv slammed on low profile tires, it doesnt ride like a caddilac anymore but its really not bad just when u hit bad bumps u feel it in the rear because the frame isnt notched yet
The front bumper will be scrapping every goddamn potholes and bumps,what is the point of the drop? Just very confused It has ESCALADE logo on the back spelled wrong on the back to ESCALAID. It seems like a very beautiful ESCALADE Premium was ruined in my opinion.I have an ESCALADE PLATINUM by the way so I am not just offering criticism without substance
Clean ass truck! 😎💪🏽
Thanks
Look amazing ❤
Thanks
Fam! Clean ASF! Well executed. My after thought was debadge it. But then I saw the escalaid. Dope bro! Lookin' forward to the updates.
Check out my tiktok lowlyfe1717
Looks nice bro
Thank you
Looks fucking great awesome job
thanks
Good eskaled 👍
Thanks
Nicez bro
Thanks bro
😊
Quick question will this kit work as good as the one you used.
4"/5" Lowering Kit, 2007-2013 GM SUV 1500 (2wd, Non-Auto Ride) Part #30013
I have to know what parts you are using
On the fron is it original springs ?and adjustable struts writh drop spindles
Yes
Are you 2wd being that low ? And would the parts you used work for a 2009 Tahoe
Im 2wd and yes these parts will work, im building a 2011 yukon right now
Model number on the rear shocks? Bought a 07 tahoe used with 4/6 drop needs rear shocks. I appreciate it!
I bought the belltech 9505 kit came with the front struts and rear shocks
😍
🤘
Daaaaaaamn
I have same setup as you ready to install. Sway bar you say will hit in back?
Yea the sway bar will hit if u use the djm rk2007 kit which gives u shorter end links which are needed with a 5 inch + rear drop, u just have to move the sway bar mounts over 2 inches to the right
Started mine last night literally same set up as you
Hell yea man
I have 285/45/22 tires. This would be too extreme for me but do you think I could do a 2/4” or 3/5” drop?
3/5 would be the max on that tire size without rubbing or having to cut
@@Tattooed_lowlyfe okay thanks for the recommendation. I’ll look through your comments again for the exact lowering kit but 3/5. Is your ride bumpy though?
@@alexayala3660 no its not bumpy
Any idea where i could get that exact grille and fender vents in black?!
Oem premium or platium trim has them
@@Tattooed_lowlyfe yea i have a 09 platinum n want a new grille n fender vents lol
What you do to eliminate suspension error ?
Hp tuned the speed limiter out but the suspension light is still on, you can get resistors wired in the suspension harness and it will turn the light off
A quick question does running no rear coil insulators make the truck ride rough or squeak?
Its suspose to insulate the spring noise, it also adds .75 inch to the ride height i slide some heater hose over the top coil and mine doesnt make any noise
@@Tattooed_lowlyfe Thank you
Hey, have a question. I'm going to install a suspension like this soon. I aware u would need to get a 4-wheel alignment afterwards. But, do u suggest getting the adjustable panhard bar, rear upper and lower control arms also? I'm asking cause I see some vids when going this low, the rear wheels tend to pull forward. Does u have that issue with the 5/6 drop?
Yes wheels will pull forward and the rearend will not be centered at this drop but its not noticeable with smaller narrow wheels but u will def tell with bigger wider wheels
@@Tattooed_lowlyfe yea, cause Im thinking of going just up to 24's. 26's that low would be a nightmare I'm sure. Just need to figure out a good tire size for the 24"s. Any recommendations?
@@freddyj804 i like to run 275 30 24
@@Tattooed_lowlyfe ok, I saw a vid of a guy running that size on a tahoe with 5/7 drop. Well man, I appreciate u responding back. I believe u said u got rid of the Escalaid on another vid of yours. But that thing was bad ass bro! Hope to see some more builds from u in the future bro. Thanks again! 🤘
@@freddyj804 yea i sold it i have another Cadillac i been working on i just post a video yesterday check it out
Fucking sick dawg
Thanks
Do you have a camber kit in the front?
No i have spindles
What did you use to eliminate the air ride shocks from throwing a code ?
Nothing the code remained on, i just cleared it everytime i turned it on, you have to wire resistors into the airide harness to turn the light off
@@Tattooed_lowlyfe did you clear it through your tuner (if it has that capability) or on the dash ?
@@Miguel2010hd nothing can clear it but the resistors, it was HP tuned the tuner said he couldn't remove the service suspension warning
@@Tattooed_lowlyfe thanks for the help bro I’ll like and subscribe
@@Miguel2010hd thanks
Model of rear springs?
Belltech 4230
I just dropped mine and my service suspension light turned on any suggestions
if u just want the light off u will have to buy resistors and wire them only way ima aware to get the 07-13 suspension light off
@@Tattooed_lowlyfe thank you
Bamf! #dkhunt
What side steps are those? Looks flush
Oem steps they come down when u open the doors, they came on platinums
Where did you get that 3rd tail light?? I need that👀
Its oem
Is it smoked? Looked like a clear lense when I first saw it lol
@@Hattle_Cauling_Foo they are platinum taillights with the appearance package
Hello can I bring my 2014 to for same service?
Where u located
I live in St.Louis
@@geraldbillingsley2434 i live in SW Arkansas
What tire size and rim size
265 35 22
any major ride quality difference?
I mean its a heavy suv slammed on low profile tires, it doesnt ride like a caddilac anymore but its really not bad just when u hit bad bumps u feel it in the rear because the frame isnt notched yet
@@Tattooed_lowlyfe 👍
why dat shit say ‘escalaid’
Because its low lol
The front bumper will be scrapping every goddamn potholes and bumps,what is the point of the drop? Just very confused
It has ESCALADE logo on the back spelled wrong on the back to ESCALAID.
It seems like a very beautiful ESCALADE Premium was ruined in my opinion.I have an ESCALADE PLATINUM by the way so I am not just offering criticism without substance
Its not for everyone, the bumper only scrapes on dips or steep declines, to each their own, yea i made custom badges that say Escalaid means low