Great tip Doug! Not only does this apply to drag cars, 4x4s as well. The response or reaction of the suspension is always affected by the anti-roll bar. A good adjustment will be a positive reaction and an improper adjustment will affect load and unload in an unequal manner.
Since a sway bar/anti roll bar only resists against what the opposite side of the car is doing, could you not adjust either side of the bar as long as you are preloading the bar in the correct rotation on the passenger side?
Everybody was wondering why my s10 has homemade rear sway links with rod ends that are right and left thread thanks as always I'm going to send this to a few that said I was nuts for doing what I did
Very good info easy to understand... these anti roll system custom made by chassis shop obviously but are there kits to be welded/installed for example A-Body Chevelle or MCarlo?
Have a question Just bought a 95 mustang street strip 990 car. Have anti roll bar Is there position the arms should be ? On mine the arms pointing up about 1 1/2" from floorboard. Thanks
Noticed in Cleetus' video yesterday that he has to point Ruby's steering wheel between 1-2 o'clock to make it launch and drive straight. Think that an anti-roll bar adjustment would fix something like that?
i know what cleeter said in that vid but i think that was just easy to say at the time. A while back I remember him saying that he wasnt going to fix the cocked steering wheel just to annoy the people who comment about how much they hate the cocked wheel and go on and on.
I have a fox with a team z anti rollbar and my car still wants to roll/twist to the passenger side pretty bad. I tried to preload the passenger side and everything and it still wants to roll
That’s good question. I’d say if you got anti roll bar I’d adjust it to manage the car or truck going left or right and just use the cal trac for tire hit and traction side. Idk if that’s right but that’s what I’m going with.
I look forward to these videos every week. Thank you in advance.
I love the Tech tip Tuesdays Doug keep it up plus it shows you what you have in stock all new goodies you have to show us😃😃😃😃😃😃😃😃👍👍👍👍👍👍👍
Great tip on adjusting those links! Thank you!
Great, it's Tech Tip Tuesday! I hope I would have that kind of suspension set up someday. ;)
Great tip Doug! Not only does this apply to drag cars, 4x4s as well. The response or reaction of the suspension is always affected by the anti-roll bar. A good adjustment will be a positive reaction and an improper adjustment will affect load and unload in an unequal manner.
Clear as mud
Thanks Doug/Motion. I doubt I'll ever use an adjustable one but it is interesting on how to do it.
I look forward to tech tip Tuesday every week
Thanks so much for sharing. Love all you guys do. True blessing to us all. God Bless.
Fantastic video, thanx Doug !
Thanks for that vid, I am at this point in my build and that helped!
Good video and very good to hear that you know
Love your videos
Great info bro, keep up the great work!
Great info thanks
Since a sway bar/anti roll bar only resists against what the opposite side of the car is doing, could you not adjust either side of the bar as long as you are preloading the bar in the correct rotation on the passenger side?
Awesome video!
Young me: pays 5 figures for school
Motion Raceworks: every Tuesday here's information more useful than what you learned at school.
Everybody was wondering why my s10 has homemade rear sway links with rod ends that are right and left thread thanks as always I'm going to send this to a few that said I was nuts for doing what I did
Great content thanks for sharing, very informative
Very good info easy to understand... these anti roll system custom made by chassis shop obviously but are there kits to be welded/installed for example A-Body Chevelle or MCarlo?
Do you start with the left side neutral and then adjust the right?
start with the arm level, lock down the driver side then adjust passenger side to neutral.
Good info especially the table leg example. I see a Credit Solution decal on the lower rear hatch. You here in Jacksonville, FL?
Do they make these for 4x4 trucks got a mud racing truck and one side of the rear end squates down
So if Im going left back off a little?
Any reason you go for the passenger side?
The passenger side is the side that always "dips" on acceleration.
Thanks for the tech tip.Would this only apply to how the car steers at the hit or could it apply down track as well.
So when would you move from roll bar adjustments to making rear steer adjustments?
Have a question Just bought a 95 mustang street strip 990 car. Have anti roll bar Is there position the arms should be ? On mine the arms pointing up about 1 1/2" from floorboard. Thanks
Noticed in Cleetus' video yesterday that he has to point Ruby's steering wheel between 1-2 o'clock to make it launch and drive straight. Think that an anti-roll bar adjustment would fix something like that?
i know what cleeter said in that vid but i think that was just easy to say at the time. A while back I remember him saying that he wasnt going to fix the cocked steering wheel just to annoy the people who comment about how much they hate the cocked wheel and go on and on.
STUPIED Question does this apply for right hand cars as well
So adjustment are only made to the passenger side
I have a fox with a team z anti rollbar and my car still wants to roll/twist to the passenger side pretty bad. I tried to preload the passenger side and everything and it still wants to roll
do you have any IRS tips? No prep?
And grease the bushings often .
why do you only adjust passenger side?
Credit solutions sticker on the back of the truck?? Dude- I'm all in on dong mods but we have to line up our priorities
Isn’t this the same as a sway bar but larger?
Could this be why ruby tracks left?? Basically the same princable for independent suspension?
Potentially, irs stuff acts slightly different but it could be
On a leaf spring truck with CALTRACS . Do you adust the anti roll bars 1st and then adjust the CALTRACS ?
That’s good question. I’d say if you got anti roll bar I’d adjust it to manage the car or truck going left or right and just use the cal trac for tire hit and traction side. Idk if that’s right but that’s what I’m going with.
Do Anti roll bar work on a IRS car ?
Do you lock in the nuts while it's neutral or you put some tension and then lock them up?
Once it’s neutral hold the link in place and tighten both lock nuts up
What about on a 2000 Silverado 1500?@@MotionRaceworksOfficial
I can't find the front core support anywhere
It’s a Rhodes Custom Auto core support.
Got Eric’s ARB on my car. Works great and weights friggin nothing