How to replace the power ribbon cable in a JBL Flip 4 speaker

Поділитися
Вставка
  • Опубліковано 3 лют 2023
  • If your JBL Flip 4 isn't working, it might be due to a broken power ribbon cable. Here's an easy fix that can save your speaker from the landfill (or recycling center)!

КОМЕНТАРІ • 43

  • @Killertophu85
    @Killertophu85 Рік тому +6

    Thanks. I had cut through a foam strip to remove the old battery easier. Only after rewatching a repair video did I notice a bare cable, which did not seem to be present in my speaker, and I realised what I had done. That foam housed this very cable.
    I'm a little annoyed at myself, and the fact I have buy another component, but this video is a life saver. Thank you so much.

    • @jesseesmith4463
      @jesseesmith4463  Рік тому +2

      That's pretty much what I did! I didn't see the cable because of the black foam insulation and accidentally broke it. (I am not actually any kind of tech wizard - just somebody who doesn't like to throw out stuff that can be fixed!) I'm so glad you found the video useful :)

  • @voltron5128
    @voltron5128 9 місяців тому +4

    This is the only video on UA-cam about this issue….well done sir!!!

  • @user001sg9
    @user001sg9 2 дні тому

    Thanks a lot for the fast response. ❤

  • @0oRiMaSo0
    @0oRiMaSo0 9 місяців тому +1

    Excellent Sir.. this saves my JBL Flip 4

  • @lukas21614
    @lukas21614 Рік тому +3

    Thank you so much for this video, had the same issue.

  • @nobodyyouknow2405
    @nobodyyouknow2405 Рік тому +1

    Thankk youu soo muchh i couldn't find any similar video explaining

  • @myabiku
    @myabiku 9 місяців тому

    amazing video!! just what I needed!! woooo!!

  • @ellynproduction6496
    @ellynproduction6496 Рік тому

    Thanks for your video bro .

  • @guillermodematos6513
    @guillermodematos6513 9 місяців тому +2

    Gracias amigo!!!!!!

  • @black.hole13
    @black.hole13 8 місяців тому +1

    спасибо! любая девушка так может повторить))

  • @markcentura6093
    @markcentura6093 3 місяці тому

    How many pins need in jbl flip 4 flex cable?? Thank you in advance for the answer

    • @jesseesmith4463
      @jesseesmith4463  3 місяці тому

      It's a 13-pin cable; I got mine here: a.co/d/cZWh4IJ
      Hope that helps!

  • @Alexboy0213Y
    @Alexboy0213Y Рік тому

    Ribbon cable kahan se laen

  • @ruidomuerto2750
    @ruidomuerto2750 Рік тому +1

    Hello friend, a question. which ribbon flex cable is needed to replace the one on the volume and play control board?

    • @jesseesmith4463
      @jesseesmith4463  Рік тому

      If you scrape off the insulating foam (if there is foam on your cable), the cable type should be printed on the existing cable in several places. (Sorry, I can't disassemble my own speaker to find out because some of the screws are stripped :(

  • @josecamilomartinezzegarra5445
    @josecamilomartinezzegarra5445 7 місяців тому +1

    Do you have the link where you bought the flex? Share it please

  • @user001sg9
    @user001sg9 2 дні тому

    Great! Where from can one buy this ribbon cable?

    • @jesseesmith4463
      @jesseesmith4463  2 дні тому

      I got mine at Amazon here: a.co/d/cZWh4IJ
      Good luck repairing your Flip 4! :)

    • @user001sg9
      @user001sg9 2 дні тому

      ​@@jesseesmith4463 Many thanks for the fast response.❤

  • @moumend713
    @moumend713 Рік тому

    the clip of that white piece (black clip that hold the ribbon) is lost in my speaker what can I do

    • @jesseesmith4463
      @jesseesmith4463  Рік тому

      That's a bummer...you could try replacing the whole connector (I Googled "flat ribbon cable connector" and many are available), but that might require soldering skills. Alternatively, if the cable has good contact and is working, you could just try securing it in place by some other means, maybe with tape or a small clamp?

  • @florinstoica5357
    @florinstoica5357 Місяць тому

    Jessee, I have just cut this cable trying to remove from the back the battery in my jbl flip 4. That's the second time I am changing the battery in this flip 4. The reason not buying 5 or 6 is that is missing the microphone on them and I can't use these newer speakers for calls.
    The first time I have removed pulling it but this time I remove it push it from back so I have cut the ribbon cable.
    The problem is that I can't find any new cable online to order it
    Can you confirm please is a cable with 13 pins? If you remember..
    Thanks,Florin

    • @jesseesmith4463
      @jesseesmith4463  Місяць тому

      Hi Florin! Apologies for the slow reply; I was traveling for the cicada emergence :)
      It is a 13-pin cable; I got mine here, and it looks like they're still in stock: a.co/d/cZWh4IJ
      Good luck with your repair!

    • @florinstoica5357
      @florinstoica5357 Місяць тому

      ​​@@jesseesmith4463
      Thank you for your reply.
      I finally succeed to replace the cable. Let me tell you how 😂
      I had a not working Acer laptop and I found a 20 pin cable inside and I cut it all along to 13 and fit it, can you believe the speaker is working veeery well 😄
      It was a difficult job because the pins are something like nano pins 😂 but I did it. The speaker after the first and one only charge from Sunday its still playing today after 5 days, has play like 3h/day roughly on half volume.
      I like Flip 4 because I use it for calls but 5 and 6 doesn't has a microphone fitted.
      did you get any cicada ? 😂

    • @jesseesmith4463
      @jesseesmith4463  Місяць тому

      @@florinstoica5357 That's impressive! It must have been a delicate operation to alter the cable.
      We collected lots of cicada sound recordings and photos - good times! :D

  • @jsbikerider7899
    @jsbikerider7899 9 місяців тому

    I am Required The cable please Suggest, How To buy this type cable

  • @peaceodiase1238
    @peaceodiase1238 11 місяців тому

    Please I need a power ribbon on my charge 5 I base in Nigeria please help

    • @jesseesmith4463
      @jesseesmith4463  11 місяців тому

      I only have experience with the Flip 4. Sorry I can't help!

    • @lukmaninmalayalam5541
      @lukmaninmalayalam5541 9 місяців тому

      @@jesseesmith4463where buy this strip

    • @jesseesmith4463
      @jesseesmith4463  9 місяців тому

      @@lukmaninmalayalam5541 I got mine from Amazon

  • @lietenroger8666
    @lietenroger8666 Рік тому

    Yo where can i get the ribbon of the jbl 1000.please the link

    • @jesseesmith4463
      @jesseesmith4463  Рік тому +4

      Sorry for the delayed response - I was out of the country for a bit! I got mine on Amazon: www.amazon.com/uxcell-Flexible-Ribbon-Player-Laptop/dp/B07S1C1PYD

    • @sandylevine5579
      @sandylevine5579 Рік тому

      @@jesseesmith4463 I have a flip 3 with the same problem. But my cable (20624 80c vw-1) is much skinnier. I want to make sure I get the right replacement. I also have to replace the other ribbon (20798 80c 60v vw-1) Where can I get these?

    • @jesseesmith4463
      @jesseesmith4463  Рік тому

      @@sandylevine5579 I got mine on Amazon - there's this ( a.co/d/h809AK9 ) ...the only downside is that you have to buy a multipack, but it's still cheaper than getting a new speaker.