I don't think I've ever seen that many doubles in one video. Thanks for giving us all the update on your airgunning status, Bob. I enjoy your rimfire videos just as much. You talked about your CCI hollow point ammo and how it works fine for pigeons at 110 yards. I know my CZ 457 Varmint is very ammo fussy. Best groups come with SK Rifle Match.
Thanks Richard! In my new field rifle (CZ457) Rifle Match and SemiAuto Match are as close to equal as I've ever seen. I put SK Long Range Match and CenterX through it the other day and was surprised by several submoa and even halfmoa groups at 100 yds. CCI Subsonic did better in the CZ...10 shots 1 moa at 100 yds. I've done some barrel prep with the CZ that I didn't do with the VuDoo, which could be what has made the improvement. I'm going to bench test the CZ again later today to see if it's the same or better after some more work on it last night. I also have yet to improve the trigger pull weight from its current factory configuration.....and also have a couple of small tricks up my sleeve. 🙂 My goal with the CZ is to have a top notch field gun that can double as a competition winner.
Great video Bob. I’m amazed at how well that scope cam footage turned out on the rimfire. I look forward to your next visit, and have no doubt that you’ll be landing on your feet.
Bob, thanks for responding to my inquiry about your rifle and hearing about the rifle that you are smithing for yourself. When you finish it, I would really appreciate a post about the build parts, process, and tools, etc. My interest would be to build a rifle that I could shoot and be proud of. I also, think that it could have broad interest. Blessings
Great video as always Bob. Fuel prices are just insane. Wife and I will say some prayers that this price nightmare will change. Just filling my Duramax just about kills me. Can’t imagine you and your 10k bill a month. Let pray some real leadership will start to run our country - For The People of our country, and not foreign interests. Thanks again for the clear vid. (Makes me want to thread the Kimber SVT for a suppressor that right now shoots sub 1/2 MOA @ 100yds. So damn collectible the way it is right now. )
Bob, did you do the work on this rifle or have a smith build it and if you had a smith, would you recommend them? I would like to have a rifle built. BTW, I am in the process of selling my air rifles and equipment as aI was unable to accomplish my expectations. Thanks
@@Jesse-le9bh No, the rifle is off the rack other than the barrel tuner and suppressor. I just built a dedicated field rifle and dare I say it shoots even tighter!!
@@BullseyeBob ...for many in Countries who cares about a shooters hearing! Canada won't allow suppressors of course, that might make shooting that much more enjoyable and better hearing protection! :)
I am paralyzed from my shoulders down, and trying to get into competitive shooting with adaptive equipment. And, any PCP equipment, guns, etc. I would be extremely interested in working with you on it sir !
@@BullseyeBob Kinda thought that might be the case ! But thought I would ask ! Thank you so much for getting back to me on it ! Good luck to you ! And God bless you ! The Good Lord looks out for hard working men like yourself !
I don't think I've ever seen that many doubles in one video. Thanks for giving us all the update on your airgunning status, Bob. I enjoy your rimfire videos just as much. You talked about your CCI hollow point ammo and how it works fine for pigeons at 110 yards. I know my CZ 457 Varmint is very ammo fussy. Best groups come with SK Rifle Match.
Thanks Richard! In my new field rifle (CZ457) Rifle Match and SemiAuto Match are as close to equal as I've ever seen. I put SK Long Range Match and CenterX through it the other day and was surprised by several submoa and even halfmoa groups at 100 yds.
CCI Subsonic did better in the CZ...10 shots 1 moa at 100 yds. I've done some barrel prep with the CZ that I didn't do with the VuDoo, which could be what has made the improvement. I'm going to bench test the CZ again later today to see if it's the same or better after some more work on it last night.
I also have yet to improve the trigger pull weight from its current factory configuration.....and also have a couple of small tricks up my sleeve. 🙂
My goal with the CZ is to have a top notch field gun that can double as a competition winner.
Yup sucks big time when finances and business takes a dive been there! Prayers for all the best for you and future endeavours!
Great video Bob. I’m amazed at how well that scope cam footage turned out on the rimfire. I look forward to your next visit, and have no doubt that you’ll be landing on your feet.
Thanks Paul! Hopefully I can make it down soon to deliver that compressor and tank!
Good to see you making videos regularly. That was good shooting. Hope you find a good local trucking job.
Thank you Nienh. I just got hired yesterday for one of the two spots I was hoping for. Things can only get better from here!
Bob, thanks for responding to my inquiry about your rifle and hearing about the rifle that you are smithing for yourself. When you finish it, I would really appreciate a post about the build parts, process, and tools, etc.
My interest would be to build a rifle that I could shoot and be proud of. I also, think that it could have broad interest. Blessings
Sounds good.
Amazing footage and shooting, that first shot you took was so quiet i was almost thinking it was an airgun..
Thanks Steve! I'm at that same farm right now....I'll send you a clip later.
Great video as always Bob.
Fuel prices are just insane. Wife and I will say some prayers that this price nightmare will change.
Just filling my Duramax just about kills me. Can’t imagine you and your 10k bill a month.
Let pray some real leadership will start to run our country - For The People of our country, and not foreign interests.
Thanks again for the clear vid. (Makes me want to thread the Kimber SVT for a suppressor that right now shoots sub 1/2 MOA @ 100yds. So damn collectible the way it is right now. )
Thanks David!
Thanks for explaining why you moved away from air guns right now. I wish you well in you search for work etc, and I ALWAYS enjoy your videos.👍
Thank you Sir!
Thanks Bob for sharing. Enjoyed the shooting and the commentary. Hope you find the best job for you. Blessings
Thanks Jesse!
Bob, did you do the work on this rifle or have a smith build it and if you had a smith, would you recommend them? I would like to have a rifle built. BTW, I am in the process of selling my air rifles and equipment as aI was unable to accomplish my expectations. Thanks
@@Jesse-le9bh No, the rifle is off the rack other than the barrel tuner and suppressor.
I just built a dedicated field rifle and dare I say it shoots even tighter!!
Great that you are still shooting 👍
I totally understand that financial thing !
Have been down that same situation !
Awesome video Bob getting it done with the Voodoo and it's true about what you said might as well use a rimfire thanks for sharing bsafe buddy 👍
Thanks Chris.
Good to see you back.
I agree with you in switching to rimfire shooting.
As much as I like air rifles shooting, the venerable .22 cal has much more appeal to me.
A lot less fuss with rimfire that's for sure. But I suppose the challenge or turn-off for many could be the cost and process of getting a supressor.
@@BullseyeBob ...for many in Countries who cares about a shooters hearing! Canada won't allow suppressors of course, that might make shooting that much more enjoyable and better hearing protection! :)
Love your videos
15:52 looked like a double. One inside and one outside.
Nice shooting
Hopefully you get back on your feet soon.
Enjoy the time you have between careers.
Thanks Cliff!
👍
Rimfire Bob-O ???
Rimfire Robert ??
😁
Love your videos, sorry to hear about your finances, gotta thank doofus dem president that. Keep shooting
I can't see how independent truckers are making it. Things will get a lot worse.
Are you still waiting on your deal to come through on your compressor, and tank ?
Len and I are missing you, keep in touch🙂
Are you Teresa from Oregon he mentioned? If soo, fellow oregon airgunner 🍻👍🏼
I am paralyzed from my shoulders down, and trying to get into competitive shooting with adaptive equipment.
And, any PCP equipment, guns, etc. I would be extremely interested in working with you on it sir !
Sorry.....I've just sold all my equipment this last two weeks.
@@BullseyeBob
Kinda thought that might be the case !
But thought I would ask !
Thank you so much for getting back to me on it !
Good luck to you !
And God bless you !
The Good Lord looks out for hard working men like yourself !