Pontiac Fiero Custom Rear Coilovers

I pieced together this coil over set up from 3 different sources and the end results came out pretty good so far. Here are the links to the parts.
Sleeves - www.speedwaymo...
springs - www.summitraci...
shocks - www.ebay.com/i...

[@franktedeschi5331]

It looks like the kit from West Coast Fiero’s with the top hat for the spring

[@mosierwerks]

Thanks for the info

[@royvalenzuela1662]

these are awesome man. gonna do this same set up

[@mosierwerks]

It rides fantastic although the 300 lbs springs are a little soft I would go with 350 lb

[@royvalenzuela1662]

@@mosierwerks did you use the rings that came w the A-1 kit at all?

[@royvalenzuela1662]

Not sure how to describe the ring. But it has a cut in it.. I’m guessing some type of locking ring for the sleeve? MYbe.

[@mosierwerks]

Yeah I didn’t use that. I just tossed it. One I thing I didn’t do that I may should have was glue the sleeves on so they don’t move when you try to adjust coil over

[@gabeflash663]

How much lower will those coilovers let you lower the ride height from stock?

[@royvalenzuela1662]

You didn't show it on the video, but you cut the perch off the struts correct?

[@mosierwerks]

Yes we used a cut off wheel and the them off the used a mill to grind off the remainder but you could just use a hand grinder

[@royvalenzuela1662]

@@mosierwerks thanks man. ordering this set up now and Ill get the 350 springs as well. Thanks for the video.

[@royvalenzuela1662]

@@mosierwerks final question. the other components not with the struts, springs or sleeves, where did you get those or are they from the fiero? That being the bumbstops, bolts, and strut mount.

[@mosierwerks]

@@royvalenzuela1662 I bought the strut mounts and bump stops off rock auto.

[@mosierwerks]

@@royvalenzuela1662 I also bought the camber bolts off rock auto

[@ghost187x]

I love this body kit. How much width does it add to the rear?

[@mosierwerks]

I can measure the rear if you want?

[@ghost187x]

@@mosierwerks If you don't mind... Looks like you have a spacer on the hub to accommodate the wide body.

[@mosierwerks]

@@ghost187x yeah it has a big spacer

[@Hershel_777]

What about the front springs? Should they be stiffer as well?

[@mosierwerks]

Mine has some sort of performance front springs not sure what brand

[@Hershel_777]

@@mosierwerks okay. I just ordered my parts so I can build my own as well. I'm not paying $600 for the WCF kit.

[@retrogamerdave362]

I ended up replacing the front shocks, but keeping the front springs and placing spacers since it was so low