The headlight needs to be replaced, and i found your video, you are an excellent teacher! I am confident I will be able to do it myself! Thank you for doing this video.
Dear sir, Thank you for your UA-cam video, but I have a question. If I change the genuine D1S headlights low and high beam with LED D1S led xenon high and low beam, will there be any faults recorded on the dashboard display? As well as the rear light changed from the genuine lights to LED lights? kind regards
If you had hid prior then it's not an issue. Some if these vehicles were halogen to begin with. Switching over to hid on those is a completely different process. All I did in this video was swap a failed hid bulb with a new one.
Not necessarily. A lot of the times when the bulb turns an off color, it's because the salts in the bulb that dictate the color have started to break down. This normally indicates the bulb is failing.
I actually have a video where I replaced the fog light assemblies completely. I'm not sure if there is a way to access the bulbs other than removing the fog lights. But the fog lights themselves are super easy to remove. Here is a link to the video: ua-cam.com/video/05pP8PJO0pM/v-deo.html
I see that you replaced the bulb for the big light. On my moms car, the light immediately next to it is not working, on either side. Or do they just never work ?
@@MunkysGarage I found the issue and already fixed. Basically my right side was switched before since it was first to burn out and the mechanic didn't install the clip correctly. So basically I had to release the clip around it while it was still stuck in there then it came out. Thanks tho.
Man really appreciate the simplicity yet to the point way that you explain things.
The headlight needs to be replaced, and i found your video, you are an excellent teacher! I am confident I will be able to do it myself! Thank you for doing this video.
You made it so simple.. Appreciate it bro💯💯💯.. thank God for you and you tube💪🏾
Thank you for your clear and concise video, great instruction!
Can you show a video for illuminated emblem logo?
What about the high beams??
I have a gl550 2009 my SUV is saying inoperative headlamp. Can I change the HID bulb?
I'm trying to replace my bulb too... But was given just the bulb w out the little box the bulb sits in.... Is the bulb alone replaceable?
Thank you. Professional and thorough.
Very detailed instructions, thank you!
Thank You for the excellent advice
What model year does this part support?
Dear sir,
Thank you for your UA-cam video, but I have a question. If I change the genuine D1S headlights low and high beam with LED D1S led xenon high and low beam, will there be any faults recorded on the dashboard display? As well as the rear light changed from the genuine lights to
LED lights?
kind regards
I dont believe there will be any warnings. Most modern LED lights have the built-in resistors needed to keep the warning lights from coming on.
anyone knows the part number or specifications for the trim ring?
Wow wquick question replacing the hid bulb will not messed up wiring voltage ???thanks in advance
If you had hid prior then it's not an issue. Some if these vehicles were halogen to begin with. Switching over to hid on those is a completely different process. All I did in this video was swap a failed hid bulb with a new one.
Whas that a high or low beam
Low beam
@@MunkysGarage thanks
How to change the fog light
Is that not a ballet problem if the bulb goes blue?
Not necessarily. A lot of the times when the bulb turns an off color, it's because the salts in the bulb that dictate the color have started to break down. This normally indicates the bulb is failing.
Give the bulb a go then because the ballast is really hard part to get. Thank you
Thank you . Your instruction is very easy to understand and take care very good
Thanks for this video it was a big help as I am a little rusty 😊👍👍👍👍👍😊
Would I follow the same procedure for the fog lights?
I actually have a video where I replaced the fog light assemblies completely. I'm not sure if there is a way to access the bulbs other than removing the fog lights. But the fog lights themselves are super easy to remove. Here is a link to the video: ua-cam.com/video/05pP8PJO0pM/v-deo.html
For driver side, is it as easy as the passenger side?
Yes should be about the same procedure
Nice garage 😍
I see that you replaced the bulb for the big light. On my moms car, the light immediately next to it is not working, on either side. Or do they just never work ?
Are you referring to the bulb closer to the grill?
@@MunkysGarage Yes. The second largest light.
Those are a high beam bulb.
Thanks next if you could do brakelight and turn signal on the mirror
Thank you!
I'd like to see how to fix a movable turn signal that seems to be stuck.
Are you referring to the headlight projector that swivels?
Excellent, well done!
I turn my bulb like the video but it doesn't wanna come out?
Have seen issues where the plastic headlight housing melts and can cause issues with the bulb not wanting to come out. Could possibly be that.
@@MunkysGarage I found the issue and already fixed. Basically my right side was switched before since it was first to burn out and the mechanic didn't install the clip correctly. So basically I had to release the clip around it while it was still stuck in there then it came out. Thanks tho.
Thanks, this helped.
thank you
Thanks
Thank you so much for sharing ❤️ 💕
Great stuff
Ima first time Benz owner I really expected this to be more difficult then what I expected smh easy
Mercedes’ charged me $200 for this
Thank you