Tip: Don't underestimate the power of a clean plate. Use a still image of the empty bluescreen instead of the clean plate node. Composing a new plate for every frame with blur, is very taxing on your system and won't give the best results. Once again, great video with much needed info!
i'm an VFX student and my teacher is fucking my semester teaching me 3d dynamics and everyone in my class hates it !!! we are making rain for last 3 months and i hate it now!!!! our whole class watch your channel for good and industry level content to learn !!! Andrey thanks for saving our lives !!!
Thanks you! I spent hours with the 3d keyer on the edit page and thought there must be a better way. Five minutes learning fusion and untrakey in this video, the results are amazing!
Fusion can do much, much better =) Andrey has shown a basic way, but there are more, especially when you have a really bad BG, or need to save more details.
@@Vassay yes, 4 years later and I'm never going back to After Effects. The last few years I've been getting the hollywood-level keys I've always wanted out of Fusion. Awesome!
Yo, Andrey! There's some really high pitched noise in this video that makes it unwatchable for someone in headphones and good hearing. It's possible that you just didn't hear it on speakers, but hearing degradation can also be a cause. Some other UA-camr - Tom Scott some time ago also released video with audio like this and by the response from the audience he got to knew that his hearing was degrading a little bit faster than usual. So yeah, just giving some heads up! Next time please remember about low and high pass filters on voice track, they won't cut anything out from your beautiful voice and you don't have to configure them at all, so pretty much just one or two more clicks before rendering the video. Other things to keep in mind: 21:9 - It's great for work, and pretty much the worst for the tutorials. Especially in that beasty 3840x1600 LG panel you have there. 21:9 already makes a lot of things smaller, and that 4k resolution is making shit tiny. Reading what option is chosen and things like that are almost impossible to read on something like 16:9 1080p 24" screen. If you don't want to fuck up your workspace, maybe try just bumping up the scaling in display properties, so you still will maintain your layout and just get bigger UI (i'm not sure if Fusion and Adobe apps support that though, worth checking out) Other than that tutorial is great, your knowledge and way you explain things is making up for every imperfection. Keep doing that, if you have time and energy, because you're damn good in that "explain stuff" business ;D And I will keep fingers crossed for your hearing man!
Response to all comments that sound is not so bad and I'm doing a big deal from nothing: It heavily depends on your hardware and hearing. Every human have different hearing response, especially with sounds that are on the end of hearing spectrum and most of the people do not even hear very top of the spectrum. It's normal and changes with age or even day to day. For example my girlfriend barely can hear any of that noise. Additionally most of the audio equipment aimed at standard customer does not transfer well (or at all) highest and lowest frequencies. Sound is like colors, everyone sees everything different and it heavily depends on your hardware, so just stop guessing and throw this video into any audio spectrum analyzer.
@@K2Core I mean I like to think that bose headphones have good range. I could go throw this into vegas right now and pitch shift it down so theres no doubt I'd be able to hear the high pitch. Either way I completely get your point, and yes I could hear it as well but I personally didn't find it distracting, but there was nothing wrong pointing it out. Anyway have a good day
Hi Andrey I've been following your channel since the beginning and truly enjoy your professionalism.I will just add that you ALWAYS MUST denoise your shot ,with Neat video plugin(because it is by far the better), before you do any keying. Also, for hair and fur and other tiny details, if you work in AE you should try the refine brush tool, it can do wonder but can be time consuming depending on the shot. After that just reapply the noise by duplicating your footage twice, put them in a comp, first layer must have is noise second must be denoised, put the top layer to substract mode then put this hole comp on top of all your denoised elements in Add mode and voilà... you will have your exact same noise. Be aware that you must work in 32 bit for it to work. Also if you erase or add elements in your shot that have differente color, the noise may not match that well.
Excellent. I've seen many tutorials that say, "there are many ways to key in fusion, but I use Delta Keyer"... I'm not sure that they really have tried the other ones. The Ultra Keyer in fusion with the matte control produced some of the best results I've seen and opened options I couldn't find in the Delta Keyer.
Thank you for the training! When remembering how I learninig "keyng" myself in a short video, I used photoshop... frame-by-frame to cut out color... it was a hell... but the work was finished. Thanks to you. Today I know more. Sorry for bad english. I slowly learning him too )
Yooo I was binge watching your videos last night looking for tutorials on integrating actors with 3D sets or 3D extensions and now you’re back with this 😁😁
Very Great instructional video as always💯..Btw I literally went through all the comments to see if there was an answer on that real-time shadow casting you did but there was none, please I will appreciate if you can throw more light on that...Thanks and keep up the good work👍
wow, DeltaKeyer appears to be a cool tool. That's very smart to use the difference between the known background plate and everything else which differs from it. Now I wonder whether After Effects has anything similar...
I was checking for Ae Alternative and here comes your video about keying in fusion. Is free version enough for comping and keying I mean fusion. Thanks
Hey Andrey! Could you do some deep tutorial for Keying in Fusion? Not just a video with process like this one but a deep tutorial of every feature what does what and which one and when to use. Also with explanation how to do a clean platte etc... Please!))
I realy want to watch a video with 3d content as the one you did of the realistic road shader. I'd love to see some concept development or something explaning your workflow. Think about it please.
in my opinion: the solution for motion blur is up the shutter speed, but compens with other parameters for a nice exposure what do you think about this ? i'm from guatemala, thanks for all
i love Your videos! could you make a detailed video of your computer that looks at the background of the video? something similar to what you did of your 2990wx and 6850k workstations that you explain a little why and how each component helps your workflow. thanks
Hey, Andrey, love your videos, I just wanted to point out that the fireflies in the background seems a little off, i don't really know what is exactly going on but from an audience's perspective it seems a little , unlike before which seemed very believable in your old spot you were in. Also another thing about the fireflies in relation to the video cut. In order to make it more believable, I would suggest that you cut the firefly shot with the footage so it also has a cut to it, Because when a cut happens the fireflies doesn't seem to "loose time" with it. Anyway I hope you get what I'm saying.
I know you perfer paid premium 3D tools, but whay do you think about blender? You have to admint, it's a powerful tool. And for the price, it's not posssible to argue.
I think you forgot to blurr the fireflies jar a little bit, it doesn't seem realistic because all the background is blurry except for that jar. It doesn't fit your depth of field.
I like how he's rendering the intro of this video on the background
Proper time management!
Tip: Don't underestimate the power of a clean plate. Use a still image of the empty bluescreen instead of the clean plate node. Composing a new plate for every frame with blur, is very taxing on your system and won't give the best results. Once again, great video with much needed info!
i'm an VFX student and my teacher is fucking my semester teaching me 3d dynamics and everyone in my class hates it !!! we are making rain for last 3 months and i hate it now!!!! our whole class watch your channel for good and industry level content to learn !!! Andrey thanks for saving our lives !!!
Can't wait to watch every single upload! The production value you have is impressive
Thanks you! I spent hours with the 3d keyer on the edit page and thought there must be a better way. Five minutes learning fusion and untrakey in this video, the results are amazing!
I'm just starting to try and move to Fusion... and this is the explanation of the key-er/s I was looking for yesterday! Awesome!
Fusion can do much, much better =) Andrey has shown a basic way, but there are more, especially when you have a really bad BG, or need to save more details.
@@Vassay yes, 4 years later and I'm never going back to After Effects. The last few years I've been getting the hollywood-level keys I've always wanted out of Fusion. Awesome!
@@Frontigenics Nice to hear that mate. Keep it up!
I LOVE your voice and the style you speak. So exciting and peaceful. I don't know what it is but I love it.
Teaching how to keying in Fusion, After, Photoshop, Indesign, MS Paint, Potato........dammmmmmmm, beast!
Not only an amazing piece of training, also a joy to watch fullscreen in a 21:9 monitor! Awesome as usual!!!
You have one of the best content of the internet, a big fan from Brazil!
Yo, Andrey! There's some really high pitched noise in this video that makes it unwatchable for someone in headphones and good hearing. It's possible that you just didn't hear it on speakers, but hearing degradation can also be a cause. Some other UA-camr - Tom Scott some time ago also released video with audio like this and by the response from the audience he got to knew that his hearing was degrading a little bit faster than usual. So yeah, just giving some heads up! Next time please remember about low and high pass filters on voice track, they won't cut anything out from your beautiful voice and you don't have to configure them at all, so pretty much just one or two more clicks before rendering the video.
Other things to keep in mind:
21:9 - It's great for work, and pretty much the worst for the tutorials. Especially in that beasty 3840x1600 LG panel you have there. 21:9 already makes a lot of things smaller, and that 4k resolution is making shit tiny. Reading what option is chosen and things like that are almost impossible to read on something like 16:9 1080p 24" screen. If you don't want to fuck up your workspace, maybe try just bumping up the scaling in display properties, so you still will maintain your layout and just get bigger UI (i'm not sure if Fusion and Adobe apps support that though, worth checking out)
Other than that tutorial is great, your knowledge and way you explain things is making up for every imperfection.
Keep doing that, if you have time and energy, because you're damn good in that "explain stuff" business ;D
And I will keep fingers crossed for your hearing man!
Thank you for your constructive comment mate. Appreciate feedback like this
The sound is fine, don't make of it a big deal.
I mean sure I can hear it when you point it out, but I really don't think it's that bad
Response to all comments that sound is not so bad and I'm doing a big deal from nothing: It heavily depends on your hardware and hearing. Every human have different hearing response, especially with sounds that are on the end of hearing spectrum and most of the people do not even hear very top of the spectrum. It's normal and changes with age or even day to day. For example my girlfriend barely can hear any of that noise. Additionally most of the audio equipment aimed at standard customer does not transfer well (or at all) highest and lowest frequencies. Sound is like colors, everyone sees everything different and it heavily depends on your hardware, so just stop guessing and throw this video into any audio spectrum analyzer.
@@K2Core I mean I like to think that bose headphones have good range. I could go throw this into vegas right now and pitch shift it down so theres no doubt I'd be able to hear the high pitch.
Either way I completely get your point, and yes I could hear it as well but I personally didn't find it distracting, but there was nothing wrong pointing it out. Anyway have a good day
Hi Andrey I've been following your channel since the beginning and truly enjoy your professionalism.I will just add that you ALWAYS MUST denoise your shot ,with Neat video plugin(because it is by far the better), before you do any keying. Also, for hair and fur and other tiny details, if you work in AE you should try the refine brush tool, it can do wonder but can be time consuming depending on the shot.
After that just reapply the noise by duplicating your footage twice, put them in a comp, first layer must have is noise second must be denoised, put the top layer to substract mode then put this hole comp on top of all your denoised elements in Add mode and voilà... you will have your exact same noise. Be aware that you must work in 32 bit for it to work. Also if you erase or add elements in your shot that have differente color, the noise may not match that well.
the sparkles in backround are in focus in contrast of the other backround
true
i noticed that too hahaha
i opinion the same
Who knows what that thing is?? It's super cool!
@@MoneyMunday it's simulation in Cinema 4d ua-cam.com/video/jwNHt6RZ1Xk/v-deo.html
Excellent. I've seen many tutorials that say, "there are many ways to key in fusion, but I use Delta Keyer"... I'm not sure that they really have tried the other ones. The Ultra Keyer in fusion with the matte control produced some of the best results I've seen and opened options I couldn't find in the Delta Keyer.
haha, and then you used the delta keyer :-) that's cool, I just got a cleaner result from the Ultra Keyer.
Thank you for the training!
When remembering how I learninig "keyng" myself in a short video, I used photoshop... frame-by-frame to cut out color... it was a hell... but the work was finished.
Thanks to you. Today I know more.
Sorry for bad english. I slowly learning him too )
That bottle thing behind you is cool!
Such a long time no see! Great video as always 🔥
Great video with professionsl approach. Thank you!
Would love to see more fusion video from you!
Já faz um bom tempo, que não lançavas um video novo! Estava esperando.... E finalmente, mas um video incrivél.
I always wondered what's the difference between ultra and Delta Keyer. Thank you for this
Very useful video!
I wish you all the best man.
Been a while, great to see you again Andrey. Great tips
VFX king is back
13:06 "Preservation. Pre-ser-va-tion. Funny word." - Andrey 2020. Great video as always, so informative and chill! Thank you very much for this video!
Yooo I was binge watching your videos last night looking for tutorials on integrating actors with 3D sets or 3D extensions and now you’re back with this 😁😁
Awesome tutorial, thanks very much👍
Finally, you are back🥰. Please 🙏do not miss us too much
SUPER DUPER CONTENT! Thank you!
I love the new environment!
Great video Andrey!
Thanks for back boss!! I’m so happy for a new video to learn more about this world!
Good to see you again sir and thank you for keying video..really helpful
UFF! YA HACÍAS FALTA HERMANO EN ESTA PLATAFORMA
You inspire me to learn more and more each day my man!
Lebrov is baaaaack! 👌
Thank you for fusion method!!!!
Can you explain the jar of lights please? Is it just VFX or actually something real?
A tutorial would be AWESOME
There is a tutorial. Search Jar with Fireflies
@@AndreyLebrov thanks bro
Подписался недавно на ваш канал. Теперь вдохновлен работать больше для того, чтобы стать крутым VFX художником! Благодарю!
Great !
Now all I need is a 21:9 screen 😁
Outstanding! Thank you for sharing such deep knowledge on keying! 🙂
I appreciate your works, please upload more VFX tutorial.
this is the best asmr video i’ve seen
WOOW... WELCOME BACK ANDREY :D :D
That owl intro is epically fantastic.
Very Great instructional video as always💯..Btw I literally went through all the comments to see if there was an answer on that real-time shadow casting you did but there was none, please I will appreciate if you can throw more light on that...Thanks and keep up the good work👍
When he said: Hairs, which i dont have.
I liked the video.
I wasn't looking for this tutorial just came here to watch some quality content.
Great To See You again BRU, Great Video
Bro can U maybe make a Compositing Tutorial in Fusion and AfterEffects? Would be amazing!
LuisVFX yesss
already exists on his channel
@@LuciidMotionPictures which one
@@patriciaWmonteiro i think its the one with the flying ship, i dont know the name of it
wow, DeltaKeyer appears to be a cool tool. That's very smart to use the difference between the known background plate and everything else which differs from it.
Now I wonder whether After Effects has anything similar...
DeltaKeyer was created as a reverse-engineered Keylight from AE. Later they have added more features to it, making it more powerful.
When you did 3D casting shadows it was looking most realistic) realtime shadows realy selling effect
Yeaah, the realtime Background Rendering :)
Good to see you're back!
I was checking for Ae Alternative and here comes your video about keying in fusion. Is free version enough for comping and keying I mean fusion. Thanks
I just download Natron and fusion, hit film looks good have to buy the pro version else it is too basic
What's the difference between Fusion 16 and built in Fusion in Davinci Resolve ?
Master is back...
Great Videos! Just one tip, drop the music background in your videos, or at least make your voice way louder.
Hey, great video. One thing. It's too small for smartphone cause of 4k monitor 🤔
hey andrey i love the videos, is there a reason you don't use Nuke in your work flow ?
Yeah. The price
@@AndreyLebrov very good point haha
Why not shooting with faster shutter to avoid motion blur then add it after compositing?
King is back
Низкий поклон!!! Прям в точку и прям вовремя!!!! Спасибо!)
Amazing iam inspired thank you sir
ANDREY! I can't believe you and I have the same desk space with white ladders and vines. Haha! That's unbelievable. :o
In after effects I use refine soft matte instead of key cleaner. Its slower but has a better result in some case.
Please make a tutorial on Houdini FX! :D That would be amazing!
Thank You Andrey...😍✌
Hey Andrey! Could you do some deep tutorial for Keying in Fusion? Not just a video with process like this one but a deep tutorial of every feature what does what and which one and when to use. Also with explanation how to do a clean platte etc...
Please!))
I realy want to watch a video with 3d content as the one you did of the realistic road shader. I'd love to see some concept development or something explaning your workflow. Think about it please.
hello, what would you use instead of Primatte for this workflow in Resolve Studio?
in my opinion: the solution for motion blur is up the shutter speed, but compens with other parameters for a nice exposure
what do you think about this ? i'm from guatemala, thanks for all
You are right, but you're not always the one who's taking the shot! so you have to learn to work with what is given to you.
@@yacinejulian6678 yep, your comment is correct, you have reason, thanks :3
New room is awesome
Andrea, can you make a tutorial about making seamless 3d intergrated vfx with live action footage
Большое спасибо за урок, Андрей! Правда, кажеться Primatte выпилили из последних версий Фьюжена) по крайней мере у меня и у колег в списке нод его нет
Видео записано с самой последней версией, странно 🤔
@@AndreyLebrov вот только что поставила последнюю с сайта - нэма)
i love Your videos! could you make a detailed video of your computer that looks at the background of the video? something similar to what you did of your 2990wx and 6850k workstations that you explain a little why and how each component helps your workflow. thanks
What are your new pc specs? Or gadgets or whatever and where can I see that?
You are great BOSS.
Hes baaack!!
Hey, Andrey, love your videos, I just wanted to point out that the fireflies in the background seems a little off, i don't really know what is exactly going on but from an audience's perspective it seems a little , unlike before which seemed very believable in your old spot you were in. Also another thing about the fireflies in relation to the video cut. In order to make it more believable, I would suggest that you cut the firefly shot with the footage so it also has a cut to it, Because when a cut happens the fireflies doesn't seem to "loose time" with it. Anyway I hope you get what I'm saying.
In Photoshop you’d just use the new Machine learning object selector. It’s one click and selects objects perfectly while keeping the edge.
Welcome back man
Hi Andrey, just wondering, what has replaced Primatte in Resolve 17, now that it has gone?
You had some sound issues ? There is a high beep in the tutorial part and some noise in the intro. Anyway your tuts are always amazing !
You have a very sensitive hearing 😂 sound is utter shit in this episode though. My apologies ;)
I know its dumb to ask but ill ask it anyway
Whats the difference between davinci resolve and fusion
Hey Andrey will you be doing a 3d show tutorial?
I know you perfer paid premium 3D tools, but whay do you think about blender? You have to admint, it's a powerful tool. And for the price, it's not posssible to argue.
again .. welcome back Andrey
very nice work :-)
What bottle on your background home, the bottle with move light ? i love this.
There's a feature on Adobe PS (cc 19) that uses machine learning. basically a beefier magic wand tool.
Спасибо за годный крутой контент, продолжай в том же духе. А с меня подписка, лайк и колокольчик))
I think you forgot to blurr the fireflies jar a little bit, it doesn't seem realistic because all the background is blurry except for that jar. It doesn't fit your depth of field.
Finnnnnnnnnnnnnnnaly, You are back. have to say that the Fireflies looks cgi this time hah
Where did you buy that blue screen? Can you give me the link plz??
Hes back, yay :)
Nice to have back man .. but i guess there is more to it in after effect .. you just scrateched the surface only of keying in AE
So you could say that this video is the key to a good key?
I can say that this thinking is a good practice to get good key, yes
Paint your wall orange man!
I miss the orange background 😥
The way he said "like a boss" might be the most boss way I have ever heard anyone say that phrase
*great!*
OH SHIT HERE WE GO!