I have the same fusion but the tuxedo black I just got the sct tuner for my car I'mma put a intercooler in it then get it dyno tuned. Is that fusion intercooled?
I have similar set but I’m running Cobb accessport V3, Cobb intercooler, and boomba throttle body spacer, steeds CAI, mustang ecoboost throttle body, e30 mix with 93 tune, all I need is methonal injection to cool things down beautiful car my brother!!
Your able to run the Cobb acessport on the fusion I connected Cobb about it and they said something to do with the ecu and how it won’t work I believe you but if so I’m gonna order one
My goal on my 2014 fusion is reliable 300hp and a lot of luxury mods for sound and interior like a big screen I did the math and I end up spending the same on mods as I would for a new slightly nicer car but mine will be far nicer at the end so it is worth it. These are the best sedans Ford has made in 30 years and the last that they will have as well.
@@marcuscastellon2275 i just tossed a tune on it and enjoyed. I paid 10 grand for it so i decided not to put any real cash into it. Be my sons in a few years.
I drove 2013 and it is about as insane as this and the economy is still insane, can say I like it a lot more then my previous car that could beat a Nissan GT-R a stock one that is but yea it’s a fun ass car
@@jissbrown7 sold a couple years ago. Got it with 80k ran to 150k. Oil changed. Trans fluid. That's it. The 1.5 was great, I've heard the 1.6 has coolant intrusion issues
I love the modification to the lower grill. Did you have to remove the lower Grill section for the aftermarket fmic? it also looks like the shutter system is removed
Holy I was honestly not expecting over 300whp but then again it was about to pull off the dyno lol. I have an AWD 2.0T and I'm completely stoked about this vid. 350tq is also impressive. I can't wait to build a V8 killer 😂. I've already embarrassed a couple 5.7 chargers from digs. I'm tryna slay scat packs 😎
I have a 2017 1.5 with a Livernois tune and a few other mods. I havent made it into my local tune shop but they were saying they could get me to 300 or really close to 300 at the wheels...does that sound right? What could I do to pep up the power of the engine? Ive been told that Ford tunes the engines down quite a bit.
Yeah but how long that trans gonna hold up the CTV trans on these car suck i also have a 2014 2.5 fusion with a CAI and a SCT X4 tune with mid resonator delete/muffler
@@automafiaracing Keep me in the loop too! I have a 2015 2.0 Ecoboost with Cold Air Intake, Intercooler, Intake Manifold Spacer, Ignition Coils, Performance Spark Plugs, Cat back Y pipe straight pipe exhaust, pedal sensor, full synthetics and a tune. The car dynoed at 260awhp. 60mph came at 5.5 seconds and the quarter was 14.9 at 100mph. I'm still looking for more out of this engine.
Lmk what mods i need and where to get it tuned. In the meantime im gonna get a couple more mods and get the sct x4 tuner if i have enough time before it snows.
Send us a message we can get some stuff for it! 📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com facebook.com/automafiaracing
Previized check with Livernois Motorsports in Detroit, they have a tuner specifically for the 1.5 and their car makes over 180 at the wheels with nothing but the tuner. Definitely a good tune.
With the right supporting mods. Colder range plugs and a tune you could probably push into the low 200s as far as whp. Maybe 250 ft lbs. Yes, 1.5 makes 178 at the CRANK. 150 at the wheels. So there's parasitic loss at the transmission. Bigger turbo (manifold fab and custom flanges/downpipe), intake, exhaust, and a tune might put you there. But to really get above 200 whp it's going to be $$. The torque is where these turbo engines shine.
@@celticrunes1911 What is the stock tune? So Livernois is where to go for the tune? With the Livernois tune there is no need for Deltaboost or Racechips?
Wow 77K Likes Kalob you got a monster of a car and a whole lotta people are ready to see the reveal of the 2015 Ford Fusion RWD build. The Fusion community wants to see how it turns out. Bad ass ride, bad ass mechanics, badass motor and and rear 3nd from transmission to the pumpkin. Cheers Boyz!!! @automafiaracing.😊😊😊🎉🎉🎉
@@automafiaracing my ‘18 did 255whp/322wtq with a k&n dropin air filter, straightpipe/stock downpipe, aem methanol injection (port injected using an throttlebody spacer and running 60/40 Meth/Water), and a inline tune box running the “MAX 91” tune. Would love to see the dyno graph of yours!
Does anyone know where I can find a bigger turbo for the 2014 Ford Fusion 2.0l EcoBoost? I've been look but can't find much, Steeda discontinued the turbo from ATP. Any suggestions would be appreciated! 😀
I was about to comment on how I don’t believe it was getting 300whp until I saw you are you running a meth setup. Great numbers! Any chance it was ever ran on a dyno with pump gas?
If you think that an AEM Wat/Meth system and open pipes on that stock turbo can add on 100 plus HP to that fusion your very mistaken. first the water meth - little bit of timing/fuel along with the stock setup. open pipes frees up about 5hp up top. That stock turbo will not press enough air for 312whp nor will the water meth give you the extra fuel you need. You would need aux. fuel. So either he forgot to mention some things or his dyno needs recalibrated
@@jeffreykasprzyk7464 The HP is limited to the 300-320 level with a stock turbo and full bolt ons. The torque can get bananas 370-400lbs. That's a sleeper. It's pretty easy to see what people have achieved in the Focus ST platform with the identical motor on the dyno
@@gojomodu9934 300-320 crank not wheel. I own a 2.0 full bolt on and E30 tune. Gtx2971 and upgraded hpfp/inj sitting on the shelf waiting to be installed. I’m pretty familiar with the 2.0s and 2.3 ecoboost engines and their capabilities. The 300+ wheel HP dyno results make me laugh tho when I know why it would show that and what dyno’s make the numbers better or worse. Without upgrading turbo, even with the single shot of meth like this car has vs a 5 port like I’ve seen on the 2.0s, 300+ is high and not accurate.
You can get 30-40rwhp without much fuss of those. When you are talking turbo's 1.6L vs 2.0L is not that big of a deal, because the turbo will be bringing the power.
What do you guys think of this?!?! This thing is crazy right?! TOTAL SLEEPER!
I have the same fusion but the tuxedo black I just got the sct tuner for my car I'mma put a intercooler in it then get it dyno tuned. Is that fusion intercooled?
@@hfxerb2 yes. No active grill shutters.
hahaha... well, it can’t really be a sleeper with a complete off-road exhaust sounding like a pizza delivery kid’s civic. 🙄
i mean do you expect a fusion to be 500 hp even if its loud? I wouldnt
@@automafiaracing Pump the brakes. You said it makes 300 horse.
I love my fusion. Perfect dad car.
Not bad
Same
I have similar set but I’m running Cobb accessport V3, Cobb intercooler, and boomba throttle body spacer, steeds CAI, mustang ecoboost throttle body, e30 mix with 93 tune, all I need is methonal injection to cool things down beautiful car my brother!!
Ni e
Your able to run the Cobb acessport on the fusion I connected Cobb about it and they said something to do with the ecu and how it won’t work I believe you but if so I’m gonna order one
I didn't know the cobb was capatible
I don't believe Cobb works on the fusion
Makes me want to mod my 17 2.0 EcoBoost Escape
do it
It’s the same engine and tranny, so I don’t see why not tbh
Make it fast
Same, we need a thread for which parts fit our suv’s
I got a lift kit installed, if anyone has any questions
Holy torque steer Batman
right
I have a 2015 escape 2.0 love it. Fast and 29mpg.
Nice
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
This makes me want to mod the heck out of my 2017 Fusion Sport. If he can get over 300HP then I'm intrigued to see how much I can pull!
Do it
With those twin turbos I'm sure you could do work
slap some MKZ 3.0tt turbos onto it they bolt on
Oh ya dk it
Easily 450+ out of the 2.7l
My goal on my 2014 fusion is reliable 300hp and a lot of luxury mods for sound and interior like a big screen
I did the math and I end up spending the same on mods as I would for a new slightly nicer car but mine will be far nicer at the end so it is worth it. These are the best sedans Ford has made in 30 years and the last that they will have as well.
Send it
how’s that goal going? just picked me up a 2014 2.0 eco boost the other day 45k miles
@@marcuscastellon2275 i just tossed a tune on it and enjoyed. I paid 10 grand for it so i decided not to put any real cash into it. Be my sons in a few years.
Nice
@@katlynklassen809 what tune did you get and how much hp she rockin now?
Flip flops! Right on!
Its hot in FL
I have a fusion Sport with the 2.7 ecoboost and it’s an animal with an E30 tune.
I bet that's fun
I drove 2013 and it is about as insane as this and the economy is still insane, can say I like it a lot more then my previous car that could beat a Nissan GT-R a stock one that is but yea it’s a fun ass car
Yeah they are cool
I see that it has a steeda intercooler, steeda CAI, and an sct x4 tuner, and of course the straight pipe.
Yes
I was just looking at that kit from steeda. Was wondering what the end result would be
I have the 1.5. FWD. Muffler delete, BOV and intake. Doing initial baseline July 11 and then adding a 91 tune from Livernois
Good luck
How reliable is the 1.5-1.6?
@@jissbrown7 sold a couple years ago. Got it with 80k ran to 150k. Oil changed. Trans fluid. That's it. The 1.5 was great, I've heard the 1.6 has coolant intrusion issues
I love the modification to the lower grill. Did you have to remove the lower Grill section for the aftermarket fmic? it also looks like the shutter system is removed
Yes
That's a stock intercooler
Yes. Stock intercooler. Steeda intercooler getting installed.
I was thinking about putting methanol injection on my 1.6. But for E30 dont the fuel system have to be changed
No
Over 300rwhp and 350rwtq? Was that stock turbo? What else did the car have?
yes stock turbo. FFE. Steeda intercooler. random cold air intake.
@@automafiaracing Thanks for the reply. That's pretty awesome!
This thing might be a really good rally car
Truw
Hola amigo tengo un Ford Fusion Titanium 2014 2.0l. Ecoboost. Quiero tuner que me recomiendas. Gracias👍
We can do it
What did you use to tune, HPTuners? I'm trying to find something that works for a Ford Edge 2.0 FWD!
SCT
Makes me want to turn my 17 MKC into a Hot Rod Lincoln...👍
Do it
Be nice to see this in the new Ford maverick
Sure would
🔥I have a 2018 fusion 2.0 turbo I want to mod it so bad lol is there any good places you know to order from?
Hit us up.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Holy I was honestly not expecting over 300whp but then again it was about to pull off the dyno lol. I have an AWD 2.0T and I'm completely stoked about this vid. 350tq is also impressive.
I can't wait to build a V8 killer 😂. I've already embarrassed a couple 5.7 chargers from digs. I'm tryna slay scat packs 😎
Just wait this car is gonna be sick
How much will that tune cost?
Around $800
@@automafiaracingthanks
Damn, those STEEDA stickers on the stock wheels/front bumper have to be good for at least 10+HP! 😂
Pretty sure 15 rwhp
@@automafiaracing 😂😂😂 damn how did you get rwhp to translate to the front wheels?
Just wait... its rwd now
@@automafiaracing 😂😂 that would be badass.
Its in the works.
I have a 2016 awd 2.0 Ecoboost what can I do do see that kind of power
Email or pm us on facebook and we can walk you through it
El Chango get a bigger turbo, intercooler, straight pipe, tune etc...
I have a 2017 1.5 with a Livernois tune and a few other mods. I havent made it into my local tune shop but they were saying they could get me to 300 or really close to 300 at the wheels...does that sound right? What could I do to pep up the power of the engine? Ive been told that Ford tunes the engines down quite a bit.
Lil high
I always wondered what my car would sound like straight piped.. a trumpet I guess.
haha yes
Sounds similar to the old 2.5 I-5 found in the Focus ST. Odd but kinda cool.
Agreed
Yeah but how long that trans gonna hold up the CTV trans on these car suck i also have a 2014 2.5 fusion with a CAI and a SCT X4 tune with mid resonator delete/muffler
It did not hold
What kind of mods were done to this car? Just a tune and methanol?
Pretty much. We will be adding several other things next week.
@@automafiaracing Keep me in the loop too! I have a 2015 2.0 Ecoboost with Cold Air Intake, Intercooler, Intake Manifold Spacer, Ignition Coils, Performance Spark Plugs, Cat back Y pipe straight pipe exhaust, pedal sensor, full synthetics and a tune. The car dynoed at 260awhp. 60mph came at 5.5 seconds and the quarter was 14.9 at 100mph. I'm still looking for more out of this engine.
We are gonna push it. Watch for our next video
@@overtorque help me where did you order you stuff from
We sell all of it.
Wow just methonal and tune impressive. My 1.6 has CAI, DP, FMIC, Methonal and E30. I wonder what i make
yup
Lmk what mods i need and where to get it tuned. In the meantime im gonna get a couple more mods and get the sct x4 tuner if i have enough time before it snows.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Stock turbo ? I’m doing a 2.0 from a 15 fusion looking for 350 to the wheels
yes. We are doing big turbo now
How much power do those stock injectors support?
not a lot tbh
Loved it im rolling a 17' 2.0EcoBoost able to tell me what performance mods were added ?
Not a ton.
Auto Mafia Racing come on. Tell us. I have a 2.0 awd titanium on 19”
Tune..meth...cai
Auto Mafia Racing would love to know what tune? I have an ‘18 titanium AWD and have been considering a simple stage 1 tune.
Thanks love the video!!!
We can get her tuned for you
I love the lower front splitter... where did you get it?
Ebay
Any updates on this car? I am building my car just curious
The car is actually getting swapped to rwd.
What are your exact mods... And tune plz?
custom!
Can we get pictures or a video of the dyno sheet?
New video coming
here looking at what my maverick will be making lol
Would be fun
Was this run done with the stock downpipe?
I dont think so no
Do you guys do email tunes for this car using the SCT X4?
We do not at this time.
Can you please list all mods done to the car?
intake, straight pipe, tune, spacer.
@@automafiaracing mmm you forgot to mention the intercooler haha. Is there any other mod you forgot to mention? 😉
Bro I have a 2016 Ford Fusion 2.5 what can I do to get it at that level
Send us a message we can get some stuff for it!
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Anything done to the transmission on this thing
Nope
What size piping did you use for the straight pipe
3 inch
what mods does this thing got??
We will make a full video on it when it comes back
I have a 1.5L 2014 Ford Fusion. It gets about 178 hp but what could you guys do to my car to get around 250 hp?
the 1.5. Not much
Previized check with Livernois Motorsports in Detroit, they have a tuner specifically for the 1.5 and their car makes over 180 at the wheels with nothing but the tuner. Definitely a good tune.
With the right supporting mods. Colder range plugs and a tune you could probably push into the low 200s as far as whp. Maybe 250 ft lbs. Yes, 1.5 makes 178 at the CRANK. 150 at the wheels. So there's parasitic loss at the transmission. Bigger turbo (manifold fab and custom flanges/downpipe), intake, exhaust, and a tune might put you there. But to really get above 200 whp it's going to be $$. The torque is where these turbo engines shine.
@@celticrunes1911 What is the stock tune? So Livernois is where to go for the tune? With the Livernois tune there is no need for Deltaboost or Racechips?
I have a 1.6 ecoboost 2013, any suggestions ? only have about 173 horsepower...
Pm us or email we can get you mods and tunes
Auto Mafia Racing I have a 2018 ecoboost and have been trying to figure out what tune I could do to it?
We tune them. Email ua
Auto Mafia Racing what is your email?
Support@AutoMafiaRacing.com
What does this fusion have ? Other than stock
Intercooler tune exhaust
What are all the mods on this car?
Its torn apart now. Built motor big turbo etc
Wow 77K Likes Kalob you got a monster of a car and a whole lotta people are ready to see the reveal of the 2015 Ford Fusion RWD build. The Fusion community wants to see how it turns out. Bad ass ride, bad ass mechanics, badass motor and and rear 3nd from transmission to the pumpkin. Cheers Boyz!!! @automafiaracing.😊😊😊🎉🎉🎉
It's coming!
does holes in your exhaust lose power ?
I mean not really.
What gear was it dyno’d in?
5th
@@automafiaracing my ‘18 did 255whp/322wtq with a k&n dropin air filter, straightpipe/stock downpipe, aem methanol injection (port injected using an throttlebody spacer and running 60/40 Meth/Water), and a inline tune box running the “MAX 91” tune. Would love to see the dyno graph of yours!
new one coming soon
dyno jet or dyno mustang
Dynocom
i got one, what all i need to do, to get over 300hp
Fbo e85 and tune
I know this is a 4yo video in my opinion if it was strapped down better it would probably give a better reading on the graph
Nah we tightened it. Just tons of movement at first
I want to know more about the red RX7 on the lift. I miss my RX7.
Its sold lol. Was an 87 FC turbo 2
Can you tag the Owner please?
No way to its youtube
Does anyone know where I can find a bigger turbo for the 2014 Ford Fusion 2.0l EcoBoost? I've been look but can't find much, Steeda discontinued the turbo from ATP. Any suggestions would be appreciated! 😀
We are in the market for one as well and may have it on the website soon
All big turbo for the Focus ST fit in the Fusion 2.0T ecoboost.
hey what mods do you perfer for the 1.5 ?
Tune
5th gear pull?
Don't remember
Morning auto Mafia jw anything i can do to a 2019 ford fusion 2.0T Awd for mods
several things. pm us
@@automafiaracing how do I pm
Email us then. Support@AutoMafiaRacing.com
What mods are done to it? I don’t see a list anywhere....
Tune and methanol injection.
@@automafiaracing would E85 work fine too?
With the proper setup E85 can be used yes
@@automafiaracing Whose tune?
I was about to comment on how I don’t believe it was getting 300whp until I saw you are you running a meth setup. Great numbers!
Any chance it was ever ran on a dyno with pump gas?
Not that we know of
Never Dyno tuned on pump gas.
If you think that an AEM Wat/Meth system and open pipes on that stock turbo can add on 100 plus HP to that fusion your very mistaken. first the water meth - little bit of timing/fuel along with the stock setup. open pipes frees up about 5hp up top. That stock turbo will not press enough air for 312whp nor will the water meth give you the extra fuel you need. You would need aux. fuel. So either he forgot to mention some things or his dyno needs recalibrated
He was spraying 100% meth.. dyno is on the money
I smell cap. Where’s the dual exhaust?
?
Not needed. They are using 3" exhaust tubing single, which can support the power level.
What is all done to it
Good amount
Amazing on a 6f35 transmission that's only rated for 300hp
It blew
Noooo☹️. Did you need a bigger intercooler for your turbo?I'm trying to squeeze 300hp out of mine and just seeing what I need
Does anybody know where I can get a wide body kit for a 2017 Ford Fusion titanium
def not
Didn't seem like you were in 5th. make the pull in 5th which is 1/1 ratio.....then tell me what it makes.
Lol
Straight sleeper
Oh it is
No, the sport is a sleeper full bolt on and tuned. 2.0 can be with big turbo, meth inj and aux fuel
@@jeffreykasprzyk7464 The HP is limited to the 300-320 level with a stock turbo and full bolt ons. The torque can get bananas 370-400lbs. That's a sleeper. It's pretty easy to see what people have achieved in the Focus ST platform with the identical motor on the dyno
@@gojomodu9934 300-320 crank not wheel. I own a 2.0 full bolt on and E30 tune. Gtx2971 and upgraded hpfp/inj sitting on the shelf waiting to be installed. I’m pretty familiar with the 2.0s and 2.3 ecoboost engines and their capabilities. The 300+ wheel HP dyno results make me laugh tho when I know why it would show that and what dyno’s make the numbers better or worse. Without upgrading turbo, even with the single shot of meth like this car has vs a 5 port like I’ve seen on the 2.0s, 300+ is high and not accurate.
My wife has one of these it's the mondeo version from NZ it's stock n it goes hard lol just don't tell her that
Lol ok
When the fusion motor is better then the ecoboost mustang motor lmao
lol I mean it is a 2.0 ecoboost
If I wanna hear how it sounds why would you put music over it ...
The music is better trust me...
Some plz tell me they know that name of the music in the entro
royalty free youtube music
I can’t ever here my blow off valve
vent it to the atmosphere
This would have been a better video without they background music. If I'm just watching a car on a Dyno I want to HEAR the car.
No you don't. Trust me
@@automafiaracing sounds like garbage?
Yes
1:56 AMOGUS
Ok
Nice!!!! Too bad my is 1.5
Still fun tho
Music to loud
Yup
Can't fuckin hear the exhaust cause of the music lol
Trust me the music is better lol
Dam I got the 1.6 sucks ass
Truth
You can get 30-40rwhp without much fuss of those. When you are talking turbo's 1.6L vs 2.0L is not that big of a deal, because the turbo will be bringing the power.
tighten your damn straps
We did haha. We had to redo the setup it was squating