FAQ: What Size Cable Should I Use For My Batteries? | Battle Born Batteries
Вставка
- Опубліковано 29 сер 2024
- Determine what size cables you need for your build. You can also contact us if you need some help determining the size.
Contact us if you have any questions at: info@battlebornbatteries.com or call us 855-292-283.
For more information on our batteries, go to the following page:
battlebornbatt...
____________________________
Stay Connected!
Facebook: / battlebornbatteries
Instagram: / battlebornbatteries
Here is useful info from the company: if using wires to connect lifepo4 cells together instead of busbars use 2/0 cable, pure copper, not CCA. I've heard 1/0 between lifepo4 cells works fine. busbars are ridgid, they have no give, use wires and protect your battery terminals from the hard hits especially from a moving vehicle. the bolts for raw cells from China are M6, which is 6 mm bodies and 8mm length. you can run out of length if installing 2 or more lugs to the batteries, buy m6 bolts but 10mm or 12mm lengths, use a cutoff wheel or angle grinder to reduce the length. use a caliper to measure how deep inside the battery terminal to the highest lug , that gives you your bolt length needed. for inverters 1500 or 2,000 watts continuous you are probably looking at 4/0 cable. they have 250 mcm cable, its larger than 4/0
Yeah.....that was about useless.
Hi Ed, thank you for your feedback. Our team would be happy to walk through this with your directly if you need any assistance. We are in the process of generating new and improved FAQs.
Not really they gave useful information. Whats your specific question
👌😍
If I have 2 X 100ah lithium batteries, 50amp solar charge controller, 2000watt inverter, 380 watts of solar. What size cable should I go with on my batteries and leave a little room to grow?
Hi! Check out this blog on our website with information about choosing cable sizing and helpful to chart to assist you in determining which size is best for your system: battlebornbatteries.com/battery-cable-size/
If I was to wire them parallel, how long do my cables need to be eye to eye...?
If I have 2 X 100ah batteries with a 50amp solar controller, 2000 watt inverter what size does my battery cables need to be?
Hi! Check out this blog on our website with information about choosing cable sizing and helpful to chart to assist you in determining which size is best for your system: battlebornbatteries.com/battery-cable-size/