GUYS, before you get to far ahead mounting your mid plate on the Civic. Check your SFI rule book! I believe the mid motor mount cannot directly attach to the dash bar,in the event of the engine exiting the vehicle in a crash and taking the dash bar with it. The work around is a tube that goes around the bellhousing which is tied with diagonals to the dash bar/A-pillar intersection. Then tubes can be run to the dash bar from this hoop around the bellhousing. This is what I did on my 25-2 chassis and I see similar designs on pro built cars. This car is awesome by the way.
Can I just say Wyatt added to the team has done nothing but boost the boys up this dynamic is F ing awesome. Keep up the work and I need to see his truck in kill
You have two more in the garage than most people, still see one and make a mistake and post it to the world. Genuine guys, that’s why I really enjoy your YT.
The guy in the NSX probably doesn’t know you own 3, 1 of which is probably going to be the fastest in the world one day, the worlds fastest MR2, Likely the worlds most famous red Hatch, and so many more accomplishments! This channel has come and will go so much further! Been with ya since Charlie was on the channel and will be with ya for future endeavors!
Well he's probably 65, doesn't even watch UA-cam, so probably cares less. His looked fairy stock, no? Could be a younger purest too, I guess but most the NSX owners in my area are old guys, who have owned since new, drive on nice days in summer when it's not raining.
Man I wish I had 2 guys like this for a weekend, I desperately need to get my late fathers car on the road , and these fellas are talented. Great video guys
Watch some Vice Grip Garage videos if its an older car and do it yourself! It will be much more gratifying than having someone else do it for you. You can do it!!!😂
@@RyanDoesAll I’m not able bodied to do everything but hey thanks for the input , I’m a special needs father and time isn’t something I have a lot of, but I’ve Managed to build and install a stroked Pontiac engine in my spare time , I really just wanted there knowledge but yep I’ll keep doing it myself 👍thanks and I’m Glad I could make you laugh
I'm not hugely familiar with drag cars like this, is 2400lbs light for a drag car built like that? For example I know plenty of circuit raced Civics weighing under 2000lbs in full trim with the driver, and those are full chassis cars just with a lot of weight reduction, my stock Civic is 2400lbs with me in it and next to no weight reduction
I got pulled over yesterday for going 70 in a 35, me and the cop got to talking and before he let me go (without a warning or ticket) he asked me if i watched boostedboiz. When i replied with yes he handed me my license and told me to have a nice day and slow down. 10/10 thank you boostedbois
The best place to mount the turbo would be in the nose to help it stay on the ground, and you could use an e-gate in the charging pipe so it will behave like a procharger and spool really quick.
Need to give the camera person a shout out. They do a good job of framing the subject and getting great angles. See some pro's who dont do as good a job.
I absolutely love how y'all don't take anything anywhere to have work done or make changes, we are patient and love that y'all do it yourself and it's amazing the work y'all do together!!! Badasses
Id love to see you guys do something crazy with a Lotus Elise or Exige. Love the look, light as all get out, and many have Toyota engines. They are basically English-Japanese cars lol.
This is a very cool project. I did not realize that you both go back to the early days. It is incredible to see how far you have come from the early days with Ebay turbos on clapped out Hondas. It was cool to see you as the kid at PFI learning the ropes, but developing the UA-cam presence with Boosted Boiz. I remember the first time Cleetus called you out at a drag strip and you were sooo impressed that Cleetus knew who you were. Very cool that you now hang with the crowd and are doing cool stuff like this build.
Thing is gonna be nuts. Will probably be able to hit your goal easy with weight got so many options like fibre glass front ends plastic or carbon fibre then doors boot lid. Can’t wait to see what it can do once use have it done and dialed in
It was actually an older military guy who moved to FL and didn’t fly anymore. Just wanted someone who would enjoy them to have them. I just got lucky 🤷🏽♂️
GREAT !!! make a solid shell around the clutch, like a clutch guard that breaks! it is important ;) need fiber door! a full one-piece fiber front too it's great I've been following you from the start, crazy to see you doing such a car now
I would say the 2JZ has been swapped into everything, a custom manifold should be super easy to find. Just to save you some time maybe 😅 can’t wait to see this build!
Gotta put his ass to work with them drones... they are a game changer for the channel... him flying it at the track and the footage gonna be 💯 primetime frfr
The hawks and the drone shots were amazing! We called in the hawks to our house with a you-tube video of owl sounds. They were dive-bombing our pool-cage. It was a hoot! Another night we called in half a dozen owls. They swarmed our back yard. Cheap entertainment!
Kyle I seen you this week in the Porsche turning off of lineBaugh into Induction Performance I was waiting for the video…that yellow nsx stays in the neighborhood it’s so clean
Looking good guys. Shame you weren't in your NSX when you saw the yellow one. Also, you should put covers on the cars you're not working on to keep them cleaner. I hate seeing the orange NSX covered in dust. :(
Strapping a go pro to an unknown quad and sending it! Gave me a heart attack with the dive I thought it failsafed and Kyle was about to be out a go pro :D
Woah..wait!!! That set of drop bars from the firewall down to frame for the rear block/trans brace needs a cross bar in the middle above trans to help eliminate torque twist bend in those verticle bars....
just to let you know I was the first one that thought up k swap in the Supra and I'm not hating on congratulating finally somebody took an idea of mine and is using it so hell yeah keep up the great progress I can't wait to see it done and Cletus I hope you enjoy that that's going to be first k swapped Supra in the world
The front mount needs another piece from the tube up to the motor plate. It should be a triangle to handle the torque. I'm afraid the welds on the mount plate will shear. Those weld are not in compression or tension. Should be on or the other. Good luck guys, I love the fabrication vids! Keep it up! edit: mid plate looks fine. It's very close to the CL of the trans shaft. If you can put in a gusset to "triangulate" that mount, it wouldn't hurt.
Alex Linder from BPA. Built the one for coopers set up back when he was on garrets channel , he’s located in Ohio one of the locals around here ! He’s a big 2j guy and knows his way around a mk 4 Supra hell of a fabricator get ahold of him for a manifold !
Everything's looking cool. I wish someone would buy it my chassis for sale on race junk. It is all set up for 2JZ turbo 400 and an open Street rail configuration. I've already had one with a big-block but I think the two Jay would have been sick if I would have completed it
![Lp. Сердце Вселенной #30 ДВА В ОДНОМ [Один человек]• Майнкрафт](http://i.ytimg.com/vi/nrXy15orKhY/mqdefault.jpg)
GUYS, before you get to far ahead mounting your mid plate on the Civic. Check your SFI rule book! I believe the mid motor mount cannot directly attach to the dash bar,in the event of the engine exiting the vehicle in a crash and taking the dash bar with it. The work around is a tube that goes around the bellhousing which is tied with diagonals to the dash bar/A-pillar intersection. Then tubes can be run to the dash bar from this hoop around the bellhousing. This is what I did on my 25-2 chassis and I see similar designs on pro built cars. This car is awesome by the way.
upvote this guy so they can see it and make changes early!
Bumped
Bump
Bump it up
Bumpity
That first pass at 50 psi Kyle will be Forever changed!
That’s cute that you think there only gonna run 50
His MR2 is making more boost
@@thatmaverickguy859 yes it is, but it’s not making that 2J power
@@thatmaverickguy859the 2j will run laps around that mr2
Dnt forget the mrs is in the 7.3s i thank and its running more then 50 in a k
11:21 thats a sick shot that bird just flipped it self upside down mid flight to catch the drone.
That Civics gonna be a beast! Loved the drone shot of the hawk attack Ect...
from your early builds to this the evolution to what your doing now, exceptional, and your confidence is shown
You’re*
@@tma4137 at least tell him which one
@@_Professor_Oak I did. The only one that’s wrong, he can figure out the rest.
Can I just say Wyatt added to the team has done nothing but boost the boys up this dynamic is F ing awesome. Keep up the work and I need to see his truck in kill
Awesome build. While it is all apart, have an NHRA chassis certification guy come and look at it.
The hawks going after the drone was so cool
It really was!
OMG, what has Wyatt and Kyle done? You guys are building a monster. 7 second pass, no sweat. You guys are gonna be dipping into the sixes. can't wait
Dude! You all are doing huge things. So pumped to see the progression through the years. Good job
The FPV drone Content is 🔥🔥🔥🔥 can't wait to see future drone shots of drag racing and jet boat videos
$200 for all that is a steal, wish I could find a sale like that. Should be a cool addition to the channel
@@lights_camera_coffee probably a smack head selling what he’s lifted 😅
Wyatt once again doing the business the more Wyatt does the better the channel gets
That’s what he gets to paid to do!
When he talks is fucking annoying tho. That lisp gets old listening to lol
Yeah he’s a bad ass. Lookin forward to this build for sure.
It's obviously not free work 😂
@@sessions1018 ? what's your point, he's not allowed to praise his work because he's getting paid to do it? I must be missing the point.
You have two more in the garage than most people, still see one and make a mistake and post it to the world. Genuine guys, that’s why I really enjoy your YT.
glad you guys have a/c in the shop, we are sitting at 109 today
We had a gnarly heat advisory here in Iowa
The guy in the NSX probably doesn’t know you own 3, 1 of which is probably going to be the fastest in the world one day, the worlds fastest MR2, Likely the worlds most famous red Hatch, and so many more accomplishments! This channel has come and will go so much further! Been with ya since Charlie was on the channel and will be with ya for future endeavors!
Well he's probably 65, doesn't even watch UA-cam, so probably cares less. His looked fairy stock, no? Could be a younger purest too, I guess but most the NSX owners in my area are old guys, who have owned since new, drive on nice days in summer when it's not raining.
He already has the nsx record as well he just wants to sink it even deeper.
The most surprising part of that clip was that Kyle didnt even know he was looking at an NSX. I guess Yellow cars be like that though
@@Jake_Hamlinnot gonna lie I was surprised myself, and idk yellow or not I’d for sure be able to tell that’s a nsx
@@leonardoramirez4678 The new Corvettes fool me from a distance and certain angle. 😆 Something very Ferrari-ish about those too.
Can’t wait to see what this build does. Awesome seeing a completely different build happening. Much love from Australia 🇦🇺🤙🏻
Keep the civic content coming and more frequently!
Ryan got a steal on that FPV gear. I fly a highly modified version of the first drone he flew.
Man I wish I had 2 guys like this for a weekend, I desperately need to get my late fathers car on the road , and these fellas are talented. Great video guys
Watch some Vice Grip Garage videos if its an older car and do it yourself! It will be much more gratifying than having someone else do it for you.
You can do it!!!😂
@@RyanDoesAll I’m not able bodied to do everything but hey thanks for the input , I’m a special needs father and time isn’t something I have a lot of, but I’ve Managed to build and install a stroked Pontiac engine in my spare time , I really just wanted there knowledge but yep I’ll keep doing it myself 👍thanks and I’m
Glad I could make you laugh
@@ryanbean3548 Where are you from ? maybe there's some boostedboiz fans willing to help you
drive by any home depot any weekday and hire some workers from the parking lor
job done
The boiz really pumping out content for us. Thank you!!
Can’t wait to see some side by side passes with mullet! Those go pro shots were SICK! Also a 2400 lb race car is nuts!
I'm not hugely familiar with drag cars like this, is 2400lbs light for a drag car built like that? For example I know plenty of circuit raced Civics weighing under 2000lbs in full trim with the driver, and those are full chassis cars just with a lot of weight reduction, my stock Civic is 2400lbs with me in it and next to no weight reduction
@@slothgarage4846 with the amount of HP they are trying to go for yea this car once ironed out will be fast!
This car is the build we’ve been waiting for,this is what boosted boys needed on this channel,can’t wait to see this car send it 👌
That thing is gonna be a rod knocker I really like the j platform and it's gonna be so light with so much suspension potential she should be a beast
Finally! a big UA-camr who does quality vids and can afford to keep modding a 2jz.
I got pulled over yesterday for going 70 in a 35, me and the cop got to talking and before he let me go (without a warning or ticket) he asked me if i watched boostedboiz. When i replied with yes he handed me my license and told me to have a nice day and slow down. 10/10 thank you boostedbois
Bring Hayden back for the turbo manifold build!!! He does a killer job!! IMO
I've been flying fpv for years. One of my favorite hobbies 🤟
The best place to mount the turbo would be in the nose to help it stay on the ground, and you could use an e-gate in the charging pipe so it will behave like a procharger and spool really quick.
are you ok? an e gate will not make a turbo into a supercharger.
@@RedmistAU So go check out what Mark Micke has to say
This pro mod civic is gonna be a competition killer
You BOYZ kick soooooo much ass brothers 💯 keep killing it and we'll keep watching 💪🫡
Hayden = Manifold 😌
That thing is going to be insane when you get it running. Great work so far. Can't wait to see it start!!
Definitely love the drone footage. Include more of that please..
Drone footage - INCREDIBLE!
I will say it's so awesome to see how far you guys have come! So happy for you guys!
dude that gopro shot on the drone when the Hawk flips over snd doubles back is so sick! BoostedBirds channel incoming????
this is the build im looking forard too seeing going down the track the most
I loved the “ferrari” sighting 😂 your channel is gold👌
Man its awesome you see you and whit can still seperate business and friendship. Still maintaining the OG-ness of the boosted boiz
Need to give the camera person a shout out. They do a good job of framing the subject and getting great angles. See some pro's who dont do as good a job.
That last drone footage with the hawk as well was so awesome! You guys are doing crazy cool things. Can't wait to see what lies ahead for y'all.
Kyle i just wanna say i never get tired of your content...been watching since the very beginning...cant wait for this builld to make its first pass
You guys are about to have a couple of serious race cars once this one and the nsx are both done.
I absolutely love how y'all don't take anything anywhere to have work done or make changes, we are patient and love that y'all do it yourself and it's amazing the work y'all do together!!! Badasses
I was in on designing the drone on the lower left. Strix screech ftw.
Love to see the FPV drones! Small community but helpful to newbies.
I can't wait to see this build fly in the quarter. Would love to see back to back vids till its done
14:40 build a long runner manifold and put that turbo front and center nice and low!!!!
Dude I cant wait for more Civic content, this build is gonna be sooo sick!
If victor tapped that box one more time I was going to go crazy 😂
I read this as he was tapping away 😂
@@__Gw dude was going in on that box lol
Id love to see you guys do something crazy with a Lotus Elise or Exige. Love the look, light as all get out, and many have Toyota engines. They are basically English-Japanese cars lol.
This is a very cool project. I did not realize that you both go back to the early days. It is incredible to see how far you have come from the early days with Ebay turbos on clapped out Hondas. It was cool to see you as the kid at PFI learning the ropes, but developing the UA-cam presence with Boosted Boiz. I remember the first time Cleetus called you out at a drag strip and you were sooo impressed that Cleetus knew who you were. Very cool that you now hang with the crowd and are doing cool stuff like this build.
Ha I remember when he was all star struck when he met Garrett.
This car is going to be insanely fast! Holy hell! And what a beautiful job you guys are doing. 👌🏼
Make sure there is enough clearance between the convertor and the oil pump. Just ask Steve Morris. He found out the hard way.
I’m so excited to watch this build it’s so rad!!!
Thing is gonna be nuts. Will probably be able to hit your goal easy with weight got so many options like fibre glass front ends plastic or carbon fibre then doors boot lid. Can’t wait to see what it can do once use have it done and dialed in
The owner of those drones is going to be stoked you found them lol
First thought that they were stolen
It was actually an older military guy who moved to FL and didn’t fly anymore. Just wanted someone who would enjoy them to have them.
I just got lucky 🤷🏽♂️
video building the manifold would be sick!
GREAT !!! make a solid shell around the clutch, like a clutch guard that breaks! it is important ;)
need fiber door! a full one-piece fiber front too
it's great I've been following you from the start, crazy to see you doing such a car now
I'm super excited to see this build progress! Great job fellas.
I see what you guys are doing, trying to bring sexy back to the drag strip that build looks clean can’t wait to see the finished product
Damn this is gonna get Brent & Cleeter fired up!
I would say the 2JZ has been swapped into everything, a custom manifold should be super easy to find. Just to save you some time maybe 😅 can’t wait to see this build!
Loving this rear wheel drive civic content!!!
THIS IS THE BEST BUILD TO DATE! NO LIMITS, NO HOLDS JUST SPEEEEEED
Great job guys I'm really excited to see what you guys are using for the rear end.
I’m here for this, the razzle and the tesla.
Bout time for a big build bro.
Gotta put his ass to work with them drones... they are a game changer for the channel... him flying it at the track and the footage gonna be 💯 primetime frfr
Action packed episode for sure!
That short wheelbase is gonna be a handful. 🙏
Its not that short, Have you seen the Starlets they run at World cup?
Should have had Wyatt in the pool floating with a tea 😂
The hawks and the drone shots were amazing! We called in the hawks to our house with a you-tube video of owl sounds. They were dive-bombing our pool-cage. It was a hoot! Another night we called in half a dozen owls. They swarmed our back yard. Cheap entertainment!
Ok, well done.
This car takes time to build perfect.
This civic is going to be so sick!!! And FAST 👍
Drone footage will always be awesome
Ahhh, Honda "Indy Pearl Yellow"... literally the best yellow in the automotive industry. If you have the chance, get a look at it up close! 👌
Mmmmmm that's a nice yellow, for sure, it just appeals to you on first look, there's something healthy about that color that just feels nice
Gotta get Cooper over to check this build out. This is sick
Kyle I seen you this week in the Porsche turning off of lineBaugh into Induction Performance I was waiting for the video…that yellow nsx stays in the neighborhood it’s so clean
Looking good guys. Shame you weren't in your NSX when you saw the yellow one. Also, you should put covers on the cars you're not working on to keep them cleaner. I hate seeing the orange NSX covered in dust. :(
Doing big shit but still keeping the channel o.g. and fun...Much respect Kyle and Wyatt
Strapping a go pro to an unknown quad and sending it! Gave me a heart attack with the dive I thought it failsafed and Kyle was about to be out a go pro :D
This is gonna get real good! I cant wait.
Woah..wait!!! That set of drop bars from the firewall down to frame for the rear block/trans brace needs a cross bar in the middle above trans to help eliminate torque twist bend in those verticle bars....
Great content and the evolution of this channel is inspiring!
Can't wait to see this thing go down the 1/4mile
Looking good guy’s, I’ll looking forward to see you complete that car good luck
just to let you know I was the first one that thought up k swap in the Supra and I'm not hating on congratulating finally somebody took an idea of mine and is using it so hell yeah keep up the great progress I can't wait to see it done and Cletus I hope you enjoy that that's going to be first k swapped Supra in the world
The front mount needs another piece from the tube up to the motor plate. It should be a triangle to handle the torque.
I'm afraid the welds on the mount plate will shear. Those weld are not in compression or tension. Should be on or the other.
Good luck guys, I love the fabrication vids!
Keep it up!
edit: mid plate looks fine. It's very close to the CL of the trans shaft. If you can put in a gusset to "triangulate" that mount, it wouldn't hurt.
Also if your hard mounting the mid plate, I'd rubber mount the back of the box. Otherwise, you may end up cracking extension housings.
Alex Linder from
BPA. Built the one for coopers set up back when he was on garrets channel , he’s located in Ohio one of the locals around here ! He’s a big 2j guy and knows his way around a mk 4 Supra hell of a fabricator get ahold of him for a manifold !
I was like, damn he guessed the weight exactly! Lol. cars gonna be a ripper.
The best part of the 2JZ is that you have something to K-swap later!
Go Boyz. You Killin it.
I remember I see you guys at Bandimere you guys were awesome
You guys should look into artech manifolds, they are cast but for optimum flow and max clearance/waste gate locations
Can’t wait to see this BEAST run / 💯%
How many times is Victor gonna slap that turbo box?? 😂
19
Everything's looking cool. I wish someone would buy it my chassis for sale on race junk. It is all set up for 2JZ turbo 400 and an open Street rail configuration. I've already had one with a big-block but I think the two Jay would have been sick if I would have completed it
Nice job. Still wish it was an LS but this will do
Sheesh! That lil tube civic is going to be sick!
Make sure you caint the page this time Kyle lol awesome build. Definitely ready to see more of this content.