Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
This is amazing but also This seems like a bad idea.
For export only, to Africa....
такова извращения еще не видел, а что помешало сделать гайку с мелкой резьбой, была бы многоразовая тяга🤣
So hard work 👌
Perigoso
I have been keeping up Pakistani videos long time. Most of cases are perfect. But dulability and safty of this job is doubtful.
Here in Perth we do it by just putting it under a hydraulic power press n press the girth of ball joint to make it tight again.
Если жить надоело можно это гавно поставить. Пробку от колы поставить приварить и пресануть кусок водопроводной трубы .
👌👌
90 % dangerous
No
10% safe
Проще выточить новый корпус.
Buy new goodddddddd
awesome
Beautiful workmanship,it won't fall apart in a hurry my friends
This is called jugad in the Indian local language. But given the facilities and resources the gentleman has done a commendable job.
Serviço de mestre, sempre gostei de fazer estes trabalhos na usinagem.
Caution: No overloading. No driving on roughroad. No overspeeding.
Here in Pakistan inner tie rods are available in the market but some old shops are still there to rebuild them. Which is definitely not a good option
Just buy replacement
Ok sangat bagus
This is acceptable, I love it when they weld it together when the plastic insert and the grease is already in it! 😂
The plastic insert was removed.
@@rakhenmanoa Yes in this video it was.
Ça c'est un travail arabe, avec tout mes respects !
Great skills, but here its easier and cheaper to just buy a new one. About $20 NZ
not in pakistan🤣
Ok for a billy kart.
100% dangerous and life risk. Not recommended
Nah... It will work fine
Everything is risk in this life
If you can put the grease cover, that's will keep debris away
This is a good technique 👍
Odlicno resenje kad su delovi nedostupni
Ok bos👍🔔⭐⭐⭐
this is great if u cant buy new one.also do not paint threads xD
The ball is properly captured
Oare merita?piesa costa in europa cam 15 euro,dar daca nu ai ce face e corect acesta munca cinstita si placuta bravo meseriasule 🎉🎉❤
but its year 2023 ant his part cost not to much why experiment 20-30euro buy new an install it.
No es necesario pintar, para eso lleva la polvera
Trabajo de $100dlls. Costo de la refacción nueva $ 15dlls. No costeable.
👍
500 da new aa jana 😅
?
Is Sy acha banany ki Koshish karo ye Sahi nahi Abad raho bhai
a caliper/micrometer would be more accurate inside
Pagal hai dimag kharab
Why?? The price of the new rack end is so small that no any need to restore it on that way. Really, why you doing it? Looks stupid.
This is amazing but also This seems like a bad idea.
For export only, to Africa....
такова извращения еще не видел, а что помешало сделать гайку с мелкой резьбой, была бы многоразовая тяга🤣
So hard work 👌
Perigoso
I have been keeping up Pakistani videos long time. Most of cases are perfect.
But dulability and safty of this job is doubtful.
Here in Perth we do it by just putting it under a hydraulic power press n press the girth of ball joint to make it tight again.
Если жить надоело можно это гавно поставить. Пробку от колы поставить приварить и пресануть кусок водопроводной трубы .
👌👌
90 % dangerous
No
10% safe
Проще выточить новый корпус.
Buy new goodddddddd
awesome
Beautiful workmanship,it won't fall apart in a hurry my friends
This is called jugad in the Indian local language. But given the facilities and resources the gentleman has done a commendable job.
Serviço de mestre, sempre gostei de fazer estes trabalhos na usinagem.
Caution: No overloading. No driving on roughroad. No overspeeding.
Here in Pakistan inner tie rods are available in the market but some old shops are still there to rebuild them. Which is definitely not a good option
Just buy replacement
Ok sangat bagus
This is acceptable, I love it when they weld it together when the plastic insert and the grease is already in it! 😂
The plastic insert was removed.
@@rakhenmanoa Yes in this video it was.
Ça c'est un travail arabe, avec tout mes respects !
Great skills, but here its easier and cheaper to just buy a new one. About $20 NZ
not in pakistan🤣
Ok for a billy kart.
100% dangerous and life risk. Not recommended
Nah... It will work fine
Everything is risk in this life
If you can put the grease cover, that's will keep debris away
This is a good technique 👍
Odlicno resenje kad su delovi nedostupni
Ok bos👍🔔⭐⭐⭐
this is great if u cant buy new one.also do not paint threads xD
The ball is properly captured
Oare merita?piesa costa in europa cam 15 euro,dar daca nu ai ce face e corect acesta munca cinstita si placuta bravo meseriasule 🎉🎉❤
but its year 2023 ant his part cost not to much why experiment 20-30euro buy new an install it.
No es necesario pintar, para eso lleva la polvera
Trabajo de $100dlls. Costo de la refacción nueva $ 15dlls. No costeable.
👍
500 da new aa jana 😅
?
Is Sy acha banany ki Koshish karo ye Sahi nahi Abad raho bhai
a caliper/micrometer would be more accurate inside
Pagal hai dimag kharab
Why?? The price of the new rack end is so small that no any need to restore it on that way. Really, why you doing it? Looks stupid.