Exactly. Before looking at this video I replaced the pressure switch. With no luck. I watched this and purchased a new check valve. And then everything was fixed. Thanks for the video as I did exactly what you said replacing the pressure switch for nothing. Thanks again!!
Sure helped me out. Unloader leaked on old pressure switch and did the same on new switch. Had no idea about this other component. Thanks loads.👍🙏. Yes! I had one of the check valves that can be easily opened. Rubber plug was off center. Fixed. Thanks again.
Great video! I had a leaking pressure switch, cleaned up the check valve of some corrosion and problem solved. 10 minutes of effort got me up and running again. Thanks for posting!
Thanks for the vid solved my problem. Early 80s Sears twin 2hp. The unit was apart for a while and some crud got in the check valve. I was happy to find it was serviceable, cleaned it out all good.
I have a question, btw, I liked and subscribed because you are very knowledgeable about something I need help with. Well, here goes, I added a series of copper lines (and a water separator just before the tank) in a grid on the wall for cooling, about 70 feet in between the compressor head and the tank to get rid of all the water. When I did, the line isn't letting the check close until all that air in that line empties. The 70 ft. of copper line takes about 3 minutes to bleed out thus wasting a fair amount of air. Is there anyway to fix this and is this doing any harm to my compressor? It did get rid of almost all of the water out of the tank, btw.
Can a load genie be replaced with a conventional check valve if I replace the switch with one that has the 1/4" unloader nipple on it? My old Speedaire doesn't even have a switch. It just plugs in and goes. I like it because it's a quiet oil pump type so I'm hoping to save it. The noise coming off the load genie sounds like a blown rod bearing on a car.
What I am seeing is, my exhaust valve is leaking when the compressor starts up. So the whole time it's running, the exhaust valve is leaking. But when it shuts off, the exhaust valve stops leaking and everything works as normal. What would this be?
Had a bad check value so i replaced it. Now the compressor pumps up to 125lbs, then over a 3 or 4 hour period it leaks back to 110lbs. Then it stays there. I was wondering if i took it apart and stretched the new spring a little would it help? Please help if you can
My pressure switch leaks air when it's shut off until the tank empties... I replaced the check valve tonight with an oem valve and it did NOT fix the issue... Any help?
Exactly. Before looking at this video I replaced the pressure switch. With no luck. I watched this and purchased a new check valve. And then everything was fixed. Thanks for the video as I did exactly what you said replacing the pressure switch for nothing. Thanks again!!
Sure helped me out. Unloader leaked on old pressure switch and did the same on new switch. Had no idea about this other component. Thanks loads.👍🙏. Yes! I had one of the check valves that can be easily opened. Rubber plug was off center. Fixed. Thanks again.
Could be weak spring
Great video! I had a leaking pressure switch, cleaned up the check valve of some corrosion and problem solved. 10 minutes of effort got me up and running again. Thanks for posting!
Thanks for the vid solved my problem. Early 80s Sears twin 2hp. The unit was apart for a while and some crud got in the check valve. I was happy to find it was serviceable, cleaned it out all good.
Very good video and SO informative. Exactly what I was looking for.
Excellent. Answered all my questions about what is wrong.
fantastic video!!!! i was so close to buying a new switch until i saw your video. Ill be buying my stuff from you guys from now on! tyvm
Thanks God very much sir for sharing your knowledge.
I have a question, btw, I liked and subscribed because you are very knowledgeable about something I need help with. Well, here goes, I added a series of copper lines (and a water separator just before the tank) in a grid on the wall for cooling, about 70 feet in between the compressor head and the tank to get rid of all the water. When I did, the line isn't letting the check close until all that air in that line empties. The 70 ft. of copper line takes about 3 minutes to bleed out thus wasting a fair amount of air. Is there anyway to fix this and is this doing any harm to my compressor? It did get rid of almost all of the water out of the tank, btw.
Excellent video and explanations.
TY for this (very useful) video!
Very pro and knowlegable.
This is a amazing freaking video!!
Can a load genie be replaced with a conventional check valve if I replace the switch with one that has the 1/4" unloader nipple on it? My old Speedaire doesn't even have a switch. It just plugs in and goes. I like it because it's a quiet oil pump type so I'm hoping to save it. The noise coming off the load genie sounds like a blown rod bearing on a car.
Thanks for such an informative video.
All hail the Algorithm
thank you. can a shut off ball valve be doing work of a air check valve. meaning, can the earlier one replace the check valve pl.
Excellent presentation with great information! Thanks
Can I put a filter before my check valve? It keeps getting crap in it
What I am seeing is, my exhaust valve is leaking when the compressor starts up. So the whole time it's running, the exhaust valve is leaking. But when it shuts off, the exhaust valve stops leaking and everything works as normal. What would this be?
Had a bad check value so i replaced it. Now the compressor pumps up to 125lbs, then over a 3 or 4 hour period it leaks back to 110lbs. Then it stays there.
I was wondering if i took it apart and stretched the new spring a little would it help?
Please help if you can
Thank you so much. Very helpful.
Can a bad check valve cause it to not build any pressure in the tank
yes
There's are leaking into the oil when I pull the dipstick out air comes rushing out head gasket or check valve
My pressure switch leaks air when it's shut off until the tank empties... I replaced the check valve tonight with an oem valve and it did NOT fix the issue... Any help?
How to order the check Valve
Can you adjust the check valve
It’s a one way valve
idk why but measuring thread size is more complicated than it needs to be
I'm looking for a replacement compressor for my big tank. I got it at Lowe's 25 years ago.
Me too, 10 hp, twin cylinders
@@stephenbemish5358 Just get online and order the rebel parts and rebuild it way cheaper