These are legit I just got them from amazon. Make sure you line up the marker things, there’s two that stick out further than the others so they go on a certain way. An easy way to line it up is by looking at the L or R on the inside of the replacement pad. Saved me another 150$
Thank you so much bro, I almost broke the ear pads ... I was pushing hard and I just didn't feel comfortable about how hard I was pushing it so I decided to look at the comments 😅
I opened them up and then with a fine thin glue, I drew a small straight line on the inside with glue. I then quickly pulled the covering slowly back in place and then i put it on the line of glue. I waited 3min & Everything worked great and works fine.
Be careful putting on the pads I broke one of the tabs trying to put it on works if you get your fingers just under the inside of the pad and push down they are much more comfortable then the originals. The price seems a bit high but it’s cheaper then buying new headphones which I was about to do.
***Update*** ok after using these for a couple hours after this original post these replacement pads or no better or worse then the originals still to tight against my ears and just unbearable after a while. While these seem a decent quality the problem seems to be with the Sony Pulse design. Looks like I will be upgrading to a better headset.
@@Oilerrocker what you end up doing i bought the pulse and returned them due to my head was about to explode i was going to buy them again and change the earbuds but need bigger as in oval shape
@@Frenchii9YT I ended up buying a pair of PC38X, way more comfortable sometimes I forget I’m wearing them . I will keep the Pulse headphones as a spare.
For the people that had problems fitting the new ear pads, my solution was that, first I had to align the two shorts clips on the headset, like trying to fit the short ones first, second is that I kinda slide it towards the center like trying to clip them while at the same time pushing the long ones inwards, this helped me to clipped at least three of the four, which only let me one clip to work on, and that´s when I just needed to find the sweet spot when pushing the last clip and it worked, it took me a few tries but I finally managed
Just had these arrive. They didn’t click in properly and the hole for your ear is smaller. Shame really, I had high hopes for these. Back to Amazon they go😞
i place the clips together and line them up 1st.. than i press down softly.. dont want to break it the clips. it finally works. do a sound test. sound the same .. job well done for me.
Make sure to press on the cusion it self not that net that's on the headset because they are separated press on the edges of the outer part and it will snap
Save money don’t get them not anymore comfortable then the originals. Too bad I was hoping it would solve the problem but I guess I’ll be upgrading my headphones.
@@Oilerrocker how were they uncomfortable for you? Are they too small for you or is the material of the ear pads bad? For me the original ear pads felt hard, almost like plastic.
stefandavison late response sorry. So I just live with it. At first I was super upset cuz I broke something valuable and I have ocd looking at the gape. But when it’s not on my mind I don’t notice it during gameplay
How's the heat with these? About a Hour or even less of gaming with the original cushions and my ears are hot as fk. I don't know why Sony use this stupid material
You must have some big ass ears, they fit good on me, my only issue is the leather is coming loose Found out how to fix the leather though if you have that issue. I popped off the ear cushion housing and glued the leather back down to it. They look new again
you're right. it's hurting the upper back side of my ears wearing them longer than 10 minutes. need thicker pads so my ears are further away from the speaker grill.
@@GinnNJuice90 my leather is just starting to come loose. Right by the power switch. Think I been going too hard turning them on when it's time to jam lol. Was it easy to pull apart? Any tips?
@@rangstafied man once it starts it'll go quick, luckily it's super easy to fix. I used a miniature flat head to start the pry. After that the hardest part is making sure that you glue it neatly so that it still looks smooth. You'll also have to compress the cushion until the glue dries, it's usually quick though. It might help to have a fan blowing so that once it's time to dry you can use that to speed it up. I plan on repairing the other side, I might upload the video of it today. I'll let you know
These are legit I just got them from amazon. Make sure you line up the marker things, there’s two that stick out further than the others so they go on a certain way. An easy way to line it up is by looking at the L or R on the inside of the replacement pad. Saved me another 150$
My tabs instantly broke off for aligning them and pressing to hear the click
After aligning the foam pads. Push down and outwards!!
Thank you so much bro, I almost broke the ear pads ... I was pushing hard and I just didn't feel comfortable about how hard I was pushing it so I decided to look at the comments 😅
Had no problem with mine,just be careful how you push them down.Try pushing them back by pressing on top of the fome and outwards
Thanks for the help❤
How do you fix the stuff covering the speaker?
Did you ever find out
@@brunneac4168 No I didn't
I opened them up and then with a fine thin glue, I drew a small straight line on the inside with glue.
I then quickly pulled the covering slowly back in place and then i put it on the line of glue.
I waited 3min & Everything worked great and works fine.
Be careful putting on the pads I broke one of the tabs trying to put it on works if you get your fingers just under the inside of the pad and push down they are much more comfortable then the originals. The price seems a bit high but it’s cheaper then buying new headphones which I was about to do.
***Update*** ok after using these for a couple hours after this original post these replacement pads or no better or worse then the originals still to tight against my ears and just unbearable after a while. While these seem a decent quality the problem seems to be with the Sony Pulse design. Looks like I will be upgrading to a better headset.
@@Oilerrocker what you end up doing i bought the pulse and returned them due to my head was about to explode i was going to buy them again and change the earbuds but need bigger as in oval shape
@@Frenchii9YT I ended up buying a pair of PC38X, way more comfortable sometimes I forget I’m wearing them . I will keep the Pulse headphones as a spare.
@@Oilerrocker nice i cant do without wireless tho
Stfu don’t tell me what to do
For the people that had problems fitting the new ear pads, my solution was that, first I had to align the two shorts clips on the headset, like trying to fit the short ones first, second is that I kinda slide it towards the center like trying to clip them while at the same time pushing the long ones inwards, this helped me to clipped at least three of the four, which only let me one clip to work on, and that´s when I just needed to find the sweet spot when pushing the last clip and it worked, it took me a few tries but I finally managed
The black fabric keeps pulling out on mine, not sure how after seeing this. Looks like it should all be one piece.
Just had these arrive. They didn’t click in properly and the hole for your ear is smaller. Shame really, I had high hopes for these. Back to Amazon they go😞
i place the clips together and line them up 1st..
than i press down softly..
dont want to break it the clips.
it finally works.
do a sound test.
sound the same .. job well done for me.
ياخي والله شكراً للاجانب
هههههههههههههههههههههههههههههههههههههههههههههههههههه ، صدق ، بس ياخي حقتي مو راضية تركب اسويها اوزنها صح بس مو راضية ابد
i tried it .. didnt work for me?
Mine isn’t going in the 4 points. Did I break it maybe.
It won't work
For some reason, one of the clips won't fully snap on the left side for me
Did you ever manage to resolve this? For me it was the two short clips on both sides
Bro that actually helped alot
Wow I didn't realize that i could fix it for my friend
where to buy
do you have earpads for sony wh-1000xm4?
Yes, the wh-1000xm4 earpads Product Link:: www.amazon.com/dp/B09D9MC1J5/
Please add the Platinum Wireless Headset Earpads video
Its driving me nuts I can't get the left side one to attach properly!
Me too! :(
Same here. Clip broke off mine.
Samee
Make sure to press on the cusion it self not that net that's on the headset because they are separated press on the edges of the outer part and it will snap
@@3lwa374 thanks man I was just sat there and nearly broke my headset 😂
Anyone one know how comfortable the ear pads are? Like compared to the stealth 700 gen 2?
They're pretty comfortable, I can game for hours with no issues, I haven't tried the stealth
Save money don’t get them not anymore comfortable then the originals. Too bad I was hoping it would solve the problem but I guess I’ll be upgrading my headphones.
@@Oilerrocker how were they uncomfortable for you? Are they too small for you or is the material of the ear pads bad? For me the original ear pads felt hard, almost like plastic.
I took off the right one tossing it on my couch in a fit and clocked it back in and there is an unspeakable gap on one side now
Did you fix it? I kid you not did exactly the same thing. I threw it on my sofa, the right cup fell off, and on the side the gap doesn't closw
Same problem here
@@jogador76_16 fixed it. Just push hard above the clips on the gap side. Harder than you think and you will hear it click in
@@stefandavison doesn’t work
stefandavison late response sorry. So I just live with it. At first I was super upset cuz I broke something valuable and I have ocd looking at the gape. But when it’s not on my mind I don’t notice it during gameplay
Спасибо! Очень помогли :)
How's the heat with these? About a Hour or even less of gaming with the original cushions and my ears are hot as fk. I don't know why Sony use this stupid material
Are those pads thick enough?
@@zenryusho I have bought new pads... and they are way better than original ones.
@@zenryusho are they expensive? I will take a look bro. Thanks for the info!
i had my headset for 10 minutes and then returned it , the holes are like half my ear size , are these designed for asian children ?
You must have some big ass ears, they fit good on me, my only issue is the leather is coming loose
Found out how to fix the leather though if you have that issue. I popped off the ear cushion housing and glued the leather back down to it. They look new again
you're right. it's hurting the upper back side of my ears wearing them longer than 10 minutes. need thicker pads so my ears are further away from the speaker grill.
@@GinnNJuice90 my leather is just starting to come loose. Right by the power switch. Think I been going too hard turning them on when it's time to jam lol. Was it easy to pull apart? Any tips?
@@rangstafied man once it starts it'll go quick, luckily it's super easy to fix. I used a miniature flat head to start the pry. After that the hardest part is making sure that you glue it neatly so that it still looks smooth. You'll also have to compress the cushion until the glue dries, it's usually quick though. It might help to have a fan blowing so that once it's time to dry you can use that to speed it up.
I plan on repairing the other side, I might upload the video of it today. I'll let you know
@@GinnNJuice90 thanks man! If ya do, I'd love to see it!