New sub here. I’m already obsessed. Been watching all the past episodes. Love watching real work be done by auto techs. Too much showing off on the autovlogs these days. This is real world cool content. From an old guy to you young bucks. Keep bringing it.
Damn cant believe you guys dont know. Take the tail light out, then you can remove the rear lock cylinder. The rear lock cylinder can be opened and expose the cable to open the rear hatch. 5 minutes tops after you do it once
Cool ride for sure. Sorry I Gotta say it fellas, you all were freaking me out standing under the vette with only the Forklift holding it up. Don’t know you all but still don’t want you guys to get hurt. I’ve seen hydraulics fail on heavy equipment, it’s a scary thing to see. Hope the Forklift had a safety lock of some sorts on it. Like the vid, Stay safe fellas ✌🏼
I rebuilt 8 totaled C5's (2 ZO6's) mostly as a hobby but made good money on all of them. My buddy Shirl Dickey did it for a living and did 28. Ten years ago, I decided to do one more to use up most of my Ebay Vette parts. It was a Torch red FRC, just what I wanted with 40K miles. Man, was it fucked up. I replaced every body part except the roof (I did that twice on the ZO6's) and the doors. The frame was beyond fixing so I cut it off at the firewall and welded a junkyard one on. All 20 dimensions in the Vette manual has were within 1/6" for the frame. I paid $3,900.00 for it and had $7,200.00 in it when finished (10 years ago). It has 60K miles on it now so at 77 it'll probably outlast me. I love that car. Well, except for the $679.00 speeding ticket I got.
When I was doing that I bid on a black 2004 with 6,500 miles. The other Copart bidders must have been asleep and I got it for $6,500.00. It was in and out of my shop in three days. It would have been my forever Vette if it hadn't been an A/T. A guy bought it for 16K for his girlfriend.
Definitely enjoy rebuilding content especially when you have nearly all the parts. Saves time waiting for next episode to drop when parts get delivered from who knows where. Keep up the good work and dying to see the outcome on the 911 turbo!
Hell ya, I would buy it. Had a C4 at 24 and 20 years later, still looking to get into another Corvette. There is a story there but very cool vid. Glad you were able to save this one.
I am an insurance appraiser and there are ways that we have to total a vehicle. I totaled a C5 it was I think a 2001, I inspected and totaled it in about 2009. The car rear ended a truck with a trailer hitch, the car had a perfect square hole in the front bumper and the trailer hitch perfectly hit the air bag sensor and caused the drivers air bag to pop, it literally needed a front bumper cover, front air bag sensors and the drivers air bag. The drivers air bag was out of production, insurance companies will not use recycled/salvage air bag/srs components and I couldn't find one, so it had to be totaled. Also some insurance policies have it written in them that your insurance company has the right to total your car if them please, this happens a lot on exotics (not corvettes) as a lot of times the parts are worth more than the car especially after depreciation.
C6 can be opened with the physical key inside the FOB at the trunk. Read the manual, it's in there! I have a 4LT GS M6 and you can keep the dash from lifting by using leather conditioner monthly. I've had zero issues.
This is the very first video I've seen of your channel that I discovered today. For the most part I like what I see, however I would like to see more hands on the work being done instead of pictures of something broken than a picture of it being fixed God bless
I get rebuilding it to as stock looking, but I would've taken the chance to upgrade a little bit like coils to lower it a bit, and maybe new wheels (Rim+tire)
Awesome channel, awesome content. And u guys seem really cool. Thank u for this. I am searching for a used vet, this find you guys got seems amazing. I’ll start looking on Copart
I bought a C6 that looked identical to this in damage. Got it home and lifted and the frame was a disaster. Not just bent in a few places but the frame was "accordioned" in at least one spot. We thought about how the damage we saw could have been done and the only thing we could come up with is that it went airborn. Luckily I bought afrom a reputable guy that I have bought a few corvettes from to rebuild and this one was just one that he bought and never had a chance to look at before he left for the winter. I purchased it from him in September after he already left, picked up the following March and he had never lifted it before he even returned. He was happy to take it back once we looked under together. I was so frustrated at that point, I just went and bought a 2 owner clean title car instead! It was spring time and I just wanted to drive, not fix. Now looking for a C6 GS to rebuild if anyone has something!
Very nice for the money, I know or think these are more of a salvage parts place more so than a garage full of techs but am sure the alignment has nothing to do with noise from suspension. With that damage, I'm sure its a wheel bearing but will keep watching to see if I'm wrong. Love this channel.
@@scraplifegarage Ahoj Jarda Čecháček video love yes love You USA 🇺🇸🏠👍🛫☘️ A české republiky 🇨🇿🛫🏠 A USA 🛫🇺🇸🏠👍👍👍☘️☘️🐕🐕🚘🚘🚘💪💪💪💯💯💯💜💜♥️☘️☘️🎂🎂🎉🎉🐕🐕🚔🚔🚔👍👍👍☘️☘️🚘🚘🙏🙏🙏🙏💪💪💪👍👍👍👍🐶🐶🐶💯💯💯💯💯
Beautiful car. Sad to see chromed wheels though. Always thought chromed wheels were too flashy and a little tacky on a vett, specially the C6, but each has their taste. Very fun video to watch. Thank you for sharing
You can open the hatch on a C6 with dead battery. Insert key in trunk and possibly a button to oush on exterior of trunk hatch. 90% of people dont know this about the C6
Alot of times they can be repos that went a year or more without being repoed and they are then salvage titled alot of times after they are finally recovered
I learned a valuable painful expensive lesson when I bought my 2011 C6, Corvette doors are pussies!! Metal hinges on fiberglass doors, driver side was cracked & whole door had to be replaced. If you buy any Corvette see if doors kinda bump or hop open, probably means door damaged by hinge. You can't lean on, press on, or open too far & bounce on the hinges of a Corvette door. Other than that...I love it, had 7 years now, 3LT, 6-speed, torch red, black interior, LS3 engine.
So I’ve had a dead battery on a c4 and what I did to unlock it was I hooked up jumpers to the starter and ground and it unlocked so you could try that again
Awesome channel love the c6 n the zr1 would love to own either only problem is I live the Caribbean help a brother out I look at them on co part all the time but need someone in the ground
If you have the car key go to the back of the trunk look under there’s a key hole put the key in open up in look to your left you will see a latch pull it and it will open your door.
Sell the rims They would definitely look better either gold or Chrome or Chrome with a color inlay I personally would probably look into a small set of fender flares since you're already going to be painting anyway wouldn't take much maybe an inch and a half more Definitely wrap the wing in a black or maybe a carbon finish
First time watching the channel, subsd, and bell. Also, I bookmarked your website since I have some projects like changing the interior of my 07 from beige/tan to all black, black/red, or black stone. By the way, you get used to the paddles after 80k miles ;) I like them because I can change gears up and down with either hand.
Thanks for making a video like this, because these types of videos are really fun to watch. I actually like the polished wheels on the car better than the black wheels. I'd be interested to see how the car looks with a ZO6 or GS factory duck tail spoiler on it compared to the ZR1 style spoiler that's on the car. Are you going to film any of the process that is required for the state police to deem the car road worthy? Personally, I think that would be interesting. Looking forward to the next video
I won’t be able to film inside the inspection station, but I’ll film what I can! Unfortunately the paint is messed up under the spoiler so it’s a zr1 spoiler or a bumper repaint
You’ve got a new subscriber, I’m super impressed with the videos. Love it and if the videos are always like this then im here to stay, I eat, drink & dream about cars, I’m a mechanic myself but I come home and watch more about cars… It’s almost disgusting 🤣
@@scraplifegarage if you ever need any mechanics that are good at taking things apart lemme know. I have all my own tools besides 1/2” drive stuff and pullers. Other then that I got sockets and all.
Hey I’m Eric in Washington DC I work construction for Hamel Builders I’m a new sub like what you guys are doing great work 👍🏾 but do you sell the cars😅
You can open the c6 from the rear trunk lol. There is a spot to put the key in but I also had to do this on my car ass the keys were inside. The corvette was shitty and still isn’t fixed after 1 1/2 years….
I feel like your putting way to much trust in that forklift standing under that car
1,000%. I am a warehouse supervisor and I have seen allot of failures.
True. Safety first
I had sweaty palms watching that. Pleeease avoid doing that again.
I thought the same as I watched this lol
Omg dude fr 🤣
Great find! Cool to see one being saved!
New sub here. I’m already obsessed. Been watching all the past episodes. Love watching real work be done by auto techs. Too much showing off on the autovlogs these days. This is real world cool content. From an old guy to you young bucks. Keep bringing it.
Damn cant believe you guys dont know. Take the tail light out, then you can remove the rear lock cylinder. The rear lock cylinder can be opened and expose the cable to open the rear hatch. 5 minutes tops after you do it once
This C6 is definitely worth bringing back. I love to see you winning.
You can't go wrong with a C6, still a beautiful ride. Especially the Z06 & ZR1. Mean corvette's 👹🔥🔥🎬👍. Salute 🚘💯😎👍
Cool ride for sure. Sorry I Gotta say it fellas, you all were freaking me out standing under the vette with only the Forklift holding it up. Don’t know you all but still don’t want you guys to get hurt. I’ve seen hydraulics fail on heavy equipment, it’s a scary thing to see.
Hope the Forklift had a safety lock of some sorts on it. Like the vid, Stay safe fellas ✌🏼
Good looking out, bad habits!
This had me holding my breath too. Crazy stuff. I wouldn't have walked under that for anything.
@@OMGWTFLOLSMH agreed !!!
@@scraplifegarage You keep doing it in your newer videos, though. Please stop before you or somebody gets killed.
I rebuilt 8 totaled C5's (2 ZO6's) mostly as a hobby but made good money on all of them. My buddy Shirl Dickey did it for a living and did 28. Ten years ago, I decided to do one more to use up most of my Ebay Vette parts. It was a Torch red FRC, just what I wanted with 40K miles. Man, was it fucked up. I replaced every body part except the roof (I did that twice on the ZO6's) and the doors. The frame was beyond fixing so I cut it off at the firewall and welded a junkyard one on. All 20 dimensions in the Vette manual has were within 1/6" for the frame. I paid $3,900.00 for it and had $7,200.00 in it when finished (10 years ago). It has 60K miles on it now so at 77 it'll probably outlast me. I love that car. Well, except for the $679.00 speeding ticket I got.
Awesome story! While I don’t think we’ll be fixing anything like that, it’s cool to see you saved one that was that bad.
When I was doing that I bid on a black 2004 with 6,500 miles. The other Copart bidders must have been asleep and I got it for $6,500.00. It was in and out of my shop in three days. It would have been my forever Vette if it hadn't been an A/T. A guy bought it for 16K for his girlfriend.
I think it's cool that you bring back Corvettes that no one else will mess with. for future corvette lovers.
Definitely enjoy rebuilding content especially when you have nearly all the parts. Saves time waiting for next episode to drop when parts get delivered from who knows where. Keep up the good work and dying to see the outcome on the 911 turbo!
Hell ya, I would buy it. Had a C4 at 24 and 20 years later, still looking to get into another Corvette. There is a story there but very cool vid. Glad you were able to save this one.
You guys have a lot of faith in the Hydraulics of that forklift
My weekend driver is a '12 C6 with a 6MT and it is truly an amazing car. Very cool to see you guys save this C6!
I’m jealous of your seats…
These videos are so great. I like the progress in each video. Most youtubers wouldve made 3 videos on just picking it up and plan idea haha
Maybe they’re on to something ;)
@@scraplifegarage nah bruh lol
I am an insurance appraiser and there are ways that we have to total a vehicle. I totaled a C5 it was I think a 2001, I inspected and totaled it in about 2009. The car rear ended a truck with a trailer hitch, the car had a perfect square hole in the front bumper and the trailer hitch perfectly hit the air bag sensor and caused the drivers air bag to pop, it literally needed a front bumper cover, front air bag sensors and the drivers air bag. The drivers air bag was out of production, insurance companies will not use recycled/salvage air bag/srs components and I couldn't find one, so it had to be totaled. Also some insurance policies have it written in them that your insurance company has the right to total your car if them please, this happens a lot on exotics (not corvettes) as a lot of times the parts are worth more than the car especially after depreciation.
Great insight thanks for posting!
Apparently depreciation doesn’t exist in 2022
C6 can be opened with the physical key inside the FOB at the trunk. Read the manual, it's in there! I have a 4LT GS M6 and you can keep the dash from lifting by using leather conditioner monthly. I've had zero issues.
I was waiting for the all famous 'pop' on that window! Good Job!
I'd watch out for rear subframe damage..with curbed rear ends the frame has a tendency to slightly crack
You're 100% right about the wheels!
Really like your uploads in here , I watched a few today so I have subscribed and I look forward to watching this as often as possible !
can’t believe i’m seeing a car be cleaned on the channel usually they’re only getting dirty!
Montgomery county here, I've seen y'all post in the Facebook groups. Didn't know you had a UA-cam channel. Subscribed. 👍
This channel is so interesting, keep up the work!
Glad you like it!
Ha just bought a c5 torque tube from ya when i replaced my transmission shes still holding strong so far 🙏🏼
Love the Corvette, good buy m8, can't wait to see end result.
This is the very first video I've seen of your channel that I discovered today. For the most part I like what I see, however I would like to see more hands on the work being done instead of pictures of something broken than a picture of it being fixed God bless
I get rebuilding it to as stock looking, but I would've taken the chance to upgrade a little bit like coils to lower it a bit, and maybe new wheels (Rim+tire)
Enjoyed the vid. It popped up in my suggested vids and most definitely I subbed right away. Big fan of channels like this!
Thanks for watching! Glad you enjoyed it!
18:45 "Get outta here rice boy!!" 😳😳😳😂😂😂😂
Perfect project I’d love to have rock it!
This one won’t be a long term project, but a fun quick rebuild none the less!
Hell yes! I'd buy that. 👍✌️ Great video!
Glad you enjoyed it! I think it was a pretty good deal, we’ll see how it turns out in the se one video though
Great video. Great flow. I’m super critical on videos but yours in a 5 Star!! Keep it up bro. 👏
Happy to hear that mr. Nutz!
clean c6 kinda jealous you found one in such easy to fix shape
love the out takes at the end!
A reward for people who watch til the end 😉
As long as the rear adjustments are moving freely it's butta.
Awesome channel, awesome content. And u guys seem really cool. Thank u for this. I am searching for a used vet, this find you guys got seems amazing.
I’ll start looking on Copart
1st time seeing your channel. Well done! Stay with it!!
YES chrome rims look SO MUCH BETTER ! than black ! I’d love to own this Vette will you be selling this car ?
I have been to your facility 2x. Brought a ls3 and other parts. LeeC is a great place
Thanks for the business and thanks for watching!
I bought a C6 that looked identical to this in damage. Got it home and lifted and the frame was a disaster. Not just bent in a few places but the frame was "accordioned" in at least one spot. We thought about how the damage we saw could have been done and the only thing we could come up with is that it went airborn. Luckily I bought afrom a reputable guy that I have bought a few corvettes from to rebuild and this one was just one that he bought and never had a chance to look at before he left for the winter. I purchased it from him in September after he already left, picked up the following March and he had never lifted it before he even returned. He was happy to take it back once we looked under together. I was so frustrated at that point, I just went and bought a 2 owner clean title car instead! It was spring time and I just wanted to drive, not fix.
Now looking for a C6 GS to rebuild if anyone has something!
Sounds like I lucked out on this one!
Very nice for the money, I know or think these are more of a salvage parts place more so than a garage full of techs but am sure the alignment has nothing to do with noise from suspension. With that damage, I'm sure its a wheel bearing but will keep watching to see if I'm wrong. Love this channel.
Called it!
@@scraplifegarage Ahoj Jarda Čecháček video love yes love You USA 🇺🇸🏠👍🛫☘️ A české republiky 🇨🇿🛫🏠 A USA 🛫🇺🇸🏠👍👍👍☘️☘️🐕🐕🚘🚘🚘💪💪💪💯💯💯💜💜♥️☘️☘️🎂🎂🎉🎉🐕🐕🚔🚔🚔👍👍👍☘️☘️🚘🚘🙏🙏🙏🙏💪💪💪👍👍👍👍🐶🐶🐶💯💯💯💯💯
Love the Corvette videos bro👍🏽
You are definitely right about the Chrome wheels, they look great...Black wheels look cheap.
Maybe some day I will be able to purchase a vett from u guys my dream car, a veteran dream
Great team!!!
I think Alex should install paddle shift into his viper
Beautiful car. Sad to see chromed wheels though. Always thought chromed wheels were too flashy and a little tacky on a vett, specially the C6, but each has their taste. Very fun video to watch. Thank you for sharing
That wasn't the Copart lot on Patapsco Ave was it bro?
Thanks guys ..now i want one. and subscribed
Can’t believe y’all don’t have the tiny air bag that opens the window instead of a plastic wedge, get one you’ll be glad you did
I did the exact same thing when I first tried shifting mine. The paddles are crap haha.
You can open the hatch on a C6 with dead battery. Insert key in trunk and possibly a button to oush on exterior of trunk hatch. 90% of people dont know this about the C6
This works great if the key isn’t locked inside!
Alot of times they can be repos that went a year or more without being repoed and they are then salvage titled alot of times after they are finally recovered
For sure the rear end, 32 years old, that tells me daddy gave you the business.
This one is getting framed 😉
I learned a valuable painful expensive lesson when I bought my 2011 C6, Corvette doors are pussies!! Metal hinges on fiberglass doors, driver side was cracked & whole door had to be replaced. If you buy any Corvette see if doors kinda bump or hop open, probably means door damaged by hinge. You can't lean on, press on, or open too far & bounce on the hinges of a Corvette door. Other than that...I love it, had 7 years now, 3LT, 6-speed, torch red, black interior, LS3 engine.
Very beautiful
Badass! A local guy with LS and Corvette parts! Got any C1 parts????
Love the c6.
I like the direction you are going with car I’ll be watching interested init
I like the Vett. Not a fan of Black paint perhaps the gray Vett in the parking lot. Good luck with your projects First time viewer. thanks.
Thanks for watching! That one is supersonic blue, you’re right it’s definitely a better color than black
I would definitely be interested in buying that c6
It sold pretty much immediately!
So I’ve had a dead battery on a c4 and what I did to unlock it was I hooked up jumpers to the starter and ground and it unlocked so you could try that again
Awesome channel love the c6 n the zr1 would love to own either only problem is I live the Caribbean help a brother out I look at them on co part all the time but need someone in the ground
Give us a shout if there’s anything we can help with
How much security do you have being in Baltimore? Leaving high performance cars in the parking lot seems dangerous!
If you have the car key go to the back of the trunk look under there’s a key hole put the key in open up in look to your left you will see a latch pull it and it will open your door.
Works great as long as the key isn’t locked in the car 😉
@@scraplifegarage howd the key get kn the car😭😭😭😭
Sell the rims
They would definitely look better either gold or Chrome or Chrome with a color inlay
I personally would probably look into a small set of fender flares since you're already going to be painting anyway wouldn't take much maybe an inch and a half more
Definitely wrap the wing in a black or maybe a carbon finish
Need to find a fiero to put my fiero motor in
Finally found one took a while but bought another one that runs and drives good condition still have my old one incase
First time watching the channel, subsd, and bell. Also, I bookmarked your website since I have some projects like changing the interior of my 07 from beige/tan to all black, black/red, or black stone. By the way, you get used to the paddles after 80k miles ;) I like them because I can change gears up and down with either hand.
Thanks for watching! Can’t beat black/red!
Good find what did u guys pick it up for? Final price
The body shops will start fixing the good c5and c6 models that used to go to the salvage auction
Hello, all from Armenia! Nice video👍.
Thanks for watching!
@@scraplifegarage I have subscribed to your channel.
Youll def make some money on this car. Your name alone will add $5k to the sticker price.
Thanks for making a video like this, because these types of videos are really fun to watch.
I actually like the polished wheels on the car better than the black wheels. I'd be interested to see how the car looks with a ZO6 or GS factory duck tail spoiler on it compared to the ZR1 style spoiler that's on the car.
Are you going to film any of the process that is required for the state police to deem the car road worthy? Personally, I think that would be interesting.
Looking forward to the next video
I won’t be able to film inside the inspection station, but I’ll film what I can!
Unfortunately the paint is messed up under the spoiler so it’s a zr1 spoiler or a bumper repaint
4LT!! Pretty rare!
Keys in the ignition doors lock. Just shake the car it will wake up
Pretty sure that 2 tone interior is very rare.
Never been much for murdered out vehicles....I find em boring. Good find!
I think black cars look best with chrome wheels , any other colour and the black rims would look pretty good .
Totally agree!
you should do ls9 with it and 6 speed auto it will be interesting like zr1 auto
STOP! IM BROKE!
@@scraplifegarage 😂😂
Man I agree Black wheels SUCK, cheap and gaudy.. Excellent choice on the New Wheels, amazing transition in appearance..
📈 you agreeing on my wheel choice on this car.
📉 me about to put black wheels on my ZR1 and 911 turbo.
You’ve got a new subscriber, I’m super impressed with the videos. Love it and if the videos are always like this then im here to stay, I eat, drink & dream about cars, I’m a mechanic myself but I come home and watch more about cars… It’s almost disgusting 🤣
Thanks for watching! I feel ya on that, I do the same!
@@scraplifegarage if you ever need any mechanics that are good at taking things apart lemme know. I have all my own tools besides 1/2” drive stuff and pullers. Other then that I got sockets and all.
Hey I’m Eric in Washington DC I work construction for Hamel Builders I’m a new sub like what you guys are doing great work 👍🏾 but do you sell the cars😅
“The dash says garage keep, the headlights say, I left it in my back yard”
We call that carport kept
Great Video Thanks 😊
Hey I have a c5 and no one on the internet can answer this. My power steering keeps seeping from the cap what should I do?
Love the channel. Would love too see a speed on the show
A speed?
Thanks for watching!!
Mazda speef3
Specializing in C5 and newer only? LS generations and newer?
I’ve bought a lot of stuff from your shop for my Gto and C5
Thanks for the business and thanks for watching!
How much did the vette cost a copart?
Dream it would be to have a Corvette, maybe if I beat this cancer or my next life.
You can open the c6 from the rear trunk lol. There is a spot to put the key in but I also had to do this on my car ass the keys were inside. The corvette was shitty and still isn’t fixed after 1 1/2 years….
"We're gonna torque them later i promise ;)" lmaooo
swap 1 wire in the steering wheel and the paddles will shift proper. Left downshift Right upshift.
Now that’s the kind of info I’m looking for!
Now that’s the kind of info I’m looking for!
How do I order parts? I need two rear wheel well liners for my 2011 GS... can't find a website...
How I wish I could drive that corvette
Love the content!
Happy to hear!
Kwikload trailer!
Been looking for a c6
Got ls 2 aluminum block
Hello my name is Nathan I was wondering do you have any Z06 2018 parts