Freightliner | Really Bad King Pin | Semi Truck
Вставка
- Опубліковано 19 тра 2022
- Thanks For Watching!!! Please Like And Subscribe.
Please check out semiworkin.com
Freightliner king pin replacement from start to finish.
Please check out some more videos: / @semiworkin
Check out some Semi Workin apparel: teespring.com/stores/semi-workin
Tools Used:
OTC Tire Dolly: amzn.to/3uRQEZW
1/2" Air Impact Wrench: amzn.to/2M1bV2l
3/4" Air Impact Wrench: amzn.to/3nW2ZcN
3/4" Axle Nut Socket Set: amzn.to/35eFdRW
Oil Suction Gun: amzn.to/3nsuMAw
Pneumatic Bottle Jacks: amzn.to/3nKxyBR
As an Amazon Associate I earn from qualifying purchases.
GREAT JOB SIR.
Great job and video 👍🏽👍🏽👍🏽👍🏽👍🏽
I’d love to see the process of re-sleeving the stub axle, it just turns up like magic and gets reinstalled.
And the tire looks to be wearing better than mine do and my king pins are not worn out.
Needs an aligament
Surprised there was anything left of that bushing LOL
Very cool. Are the pins on both sides of the truck usually replaced, even if only one is really bad?
They should be but you do have cheap people who will get 1 done
Magnetize those special sockets just for pulling washers, spacers etc
I have a fld120 Year 1990 and can someone tell me why I have to replace my brakes every month, Thay are very then or can I replace the part where the brakes go that's the from axel .
How long does this job take?
I could be wrong but isn't the king pin the part of the trailer that connects to the 5th wheel into the locking jaws
Yes, that is ALSO a king pin, but these are king pins too.
@@georgiapatriot4575 got it
Is the trick to prolonging the life of these pins, jacking up the suspension to get better flow of grease? Or is it driving habits?
Just grease it every service. Which is 20k. And it will last a long time
Grease it every 3weeks
I did mine at 10,000 miles. Sold the truck Mar of ‘19 1,128,000 miles original K&P KW W900 ‘07 with 1 of the’06 CAT C 15 Acert we were never inside the engine except for overheads & standard maintenance
My tires keep wearing uneven. 2 mechanics said i need king pins but the other 2 mechanics say they don't know what the problem is? I don't want to just throw 3 grand out the window
Do you still drive on it? What's the update
Is the oil seal replace ? And you can just pull it and push it back ?
Might as well since they are cheap enough
What happens if you put the bearing with the lip part facing up? Just curious
It doesn't allow grease to go out when greasing and can allow junk to get in. It is designed so that as you grease the pins the grease can relieve out the seal in the top and bottom grease areas of the axle.
@@chucksnevah2020 appreciate the response back thank you sir!
If you have one for drop axle king pins send me link
c the tire jack is fine and dandy but would be much easier to just take the tire off and pull the hub by hand
yikes deff greasing up my truck once a month
There wasn't even any swearing are you sure that was a human
Why the king pin goes bad if I can ask
Lots of mileage goes on them trucks and other suspension being worn creates more stress elsewhere also along with driver driving style road conditions etc
Yep, gotta little slop I’d say.
+
This is the least instructive king pin repair video I've ever seen.
Can’t tell is that a good or a bad thing
@@hectormartinez2879 according to him this video doesn't serve his purpose
Says more about you than it does the video