Btr stage 3 N/A cam tune
Вставка
- Опубліковано 16 жов 2024
- Final numbers were 393hp/387tq.
Sbe LS1
62cc hand ported 243's
LS6 intake and ported tb
30lb red injectors
1.75" hooker headers into a beat up y pipe
LS7 clutch, steel DS
Moser 12 bolt with 4.11
Thing should of make 400’s
Not through a 12 bolt dumbass
I could have sworn you should be making more than that. Did you need more injector?
SilverPanda WS6 no it has bigger injectors. I'm thinking it might have been due to the pushrods being too long keeping the valves open. I'm rebuilding it right now and I literally just finished measuring it and it's showing I needed shorter ones. Also, the car has a 12 bolt in it so that might have something to do with it also.
camaroboricua hmm. Alright, i'm actually going the same route you are. With the BTR 3 cam.
SilverPanda WS6 it's a good cam. You'll be happy with it. Mine died and took the cam with it so I decided to try out the tick SNS stage 3. Hopefully it'll be running soon
camaroboricua ah okay. Any pointers or tips with the BTR cam?
SilverPanda WS6 not really. I'd just say to make sure your pushrods are the correct length and make sure your lifter trays are good. The lifters should be snug on the trays. Otherwise it might chew up the cam. It likes nitrous so if you were planning on spraying that's a plus. I didn't tune it myself so I can't help in that aspect.
What rpm was the peak numbers at?
Talents I don't remember, I never even got a print out for it... :(
aw that sucks but this is a beefy setup !