[Repair] NITRO RX470 No Display / No Detect / No Working
Вставка
- Опубліковано 7 жов 2024
- i found this case about 1,5 years ago, and already repaired about 5 cards like this.
now just able to make a video how to repair nitro rx470. - Наука та технологія
now that's talent with skill! Great repair job!
Your repair guide helped me to rivive my dead Rx460.Many Thks.
Cool. Im returning mine, I got RX460 windforce 4GB. Fans work at 100% from the boot, and doesn’t disable after boot. Don’t give video signal on the HDMI port and it’s not recognised by windows or the bios which one was the problem with your GPU?
@@GJoseeph All.
@@M.Rahmanx01 which fuse do you repair? im repairing mine too pls help
@@ableh7489 Watch the video.
@@M.Rahmanx01 what ampere do u buy
i have an f* load of old and broken gfx cards and mobos... some of them i can even see exploded capacitors and fuses... the problem is i wouldn't know chips to replace them with so they have been sitting in a box collecting dust... i love watching this kind of videos... it really changes the fate of those parts and preventing them from being discarded due to premature failures...
actually it not so hard to repair if you want to learn it.
Really? i found it's hard to learn to repair pc part
Your motherboard is broken
Hey man what kind and do you still have them? I would buy one or 2 from you if you would consider.
Great work and save! I haven't seen those kind of mosfets before.
+23670728945
@@gastonbuma7868 what
You have helped me repair my
RX480
THANKS A LOT!
Damn it those ICs are hard to pull off, but did it eventually, thats a great video man! I bought all those tools and watched this for like 20 times and tested on some junk PCBs before the real deal.
Thanks, my RX470 owe you its life 😅
Today, this skill will make you absolute bank.
Nice style Please keep uploading. 👍🏻👍🏻👍🏻👍🏻
Hello, how many degrees do you set the hot air soldering iron to?
Nice man, i got my R9 270x died yesterday and i put it at 180°C for 5 min and work perfectly now :D
good, but if the solder ball not melted properly it will be broen again soon , maybe about 14-60days.
reball at least 1 year
Thanks have a card here with the same issue removed one of the MOSFET IR3553 now the short is gone going to order a pack of 5 IR3553 so I have some spares.
Excellent repair video. Thanks a lot!
Nice job and thank you for the information, love to learn is the key!
Thanks for this! It Exactly what is happened to my 470, anyone know where to find ir3553? I found a few on ebay but they're a month out for delivery
i currently have a xfx rx580 that wont detect. good little vid.
mine just wont get recognised by board or disp[lay anything, but the chip gets hot quick. so at least I know its not 100% dead
what a good tutorial, I hope i can fix my dead HD 7970
What a legendary GPU. Just retired my 7850 last week for an rx 480.
Hi, which multi-meter and heat-gun do you recommend for such repairs?
I am using an old Fluke Multimeter the cheapest multi-meter with a speaker will work its best to have needle pointed probes. For the Heat gun, I use Quick 681DW its best to use an under heater on some of these cards they absorb so much heat.
Great work man. So far managed to repair 2 this way. I do have a problem with some stubborn capacitors that are reeeeaaallly hard to remove. What soldering iron do you recommend for easy removal, 100W 150W?
i only use goot 60w original solder replace solder tips with custom or i use hakko solder with T12-C4
if u have a hard solder with caps ussually i use hot air and solder together it will easy to remove it
Tnx for the replay man!
What if nothing's shorted, yet still no power to gpu/vram. All 3v 5v 12v is there, but no 0.8v-1v on mosfet low side. Btw, ever replace vram chip? It'll be helpful if you can make a video how to detect which vram chip is bad and show replacement process. Great channel, very straightforward and easy to follow.
it sad me got cheap ex mining card rx 470, run for about 1 month, and then dead..want to repair my self, can't found schematics...the component will take month if really exist
same :(
Hi, I did remove two of MOSfets but it still giving me closed circuit. Can you help me a bit please?
Thank you
Great! A video that shows you what to do and why. But there where some lines on the monitor, are the GPU and VRAM connections ok?
Most likely a data signaling problem on the monitor itself
You nailed it dude!! High 5
hello nice video i had similar problem 2 fuses blowned and one mosfet out but it was the 3rd one from buttom
i had to take 2 to find the culprit......i resolder the good one back , my question is is there any replacement mosfet for these one ? also i am having difficulty to read the part # of these mosfet ( wich one you put ) thanks
Thanks I have a similar card Nitro RX570 8gb it's has the same problem as in this video I have tested the 4 small white fuses on the card and same 2 fuses are blown on my card. I am a complete novice at soldering I've ordered a 3 in one 1 reflow station from eBay and some replacement fuses. Is there any tips you could give me like what temp to run the hot air gun at to remove fuses I've got your video playing on 49inch TV help me see what your doing a bit better I'm very thankful you uploaded this video there is not much documentation on fixing these GPUs.
analog hot air use :
-Heat : 4.5 (310c-330c)
-air : 4
digital hot air use :
-heat : 330c-360c
-air : 75-85
all depend on brand reflow station, you can test with a scrap card first
@@Zettabitlab Thanks I have a couple old 512mb low profile cards I plan on testing with I managed to find the fuses on ebay exact same I'm hoping no components are broken and just the fuses. Yihua 853D is the model of the hot air station I ordered hoping it will do the trick. Your very talented keep up the good work thanks for getting back to me.
@@HackingVision I've been looking at the Yihua 853D. Do you recommend it after using it?
@@FHP2395 been good upto now done the job currently managed to fix a couple GPUs using it not a bad station for the price soldering iron feels a bit cheap but for the price it's a bargain for begineers like me.
@@HackingVision I'm an absolute beginner. Been watching repair videos this past week and the whole process looks really interesting. Hopefully the Yihua will get me started. Currently on offer where I'm located: www.amazon.co.uk/YiHua-Soldering-Station-Rework-Supply/dp/B07K1HCLSF
Congrats on the two GPUs you've already fixed. My first project recently arrived, a GTX 970. If it is okay with you could you help me diagnose the problem.
I lose display when under load. The card is fine otherwise.
You mentioned that the checked mosfet was number 1. How did you find this out? Thanks for the video.
Great job. Im having so much problems with that kind of mosfet on r9 390. I change one, another blow up, change that different one blow up. At least 5 of them went with magic smoke. Im hoping changing mosfet driver will make a difference because the only thing that im questioning beside that is my soldering skills🥴
use hot air and flux
That's awesome! Question, how did you determine which mosfet to replace? it seemed to me all but the bottom one or 2 were beeping with the VIN
One leg is Vin, just looking dor vin shorted with gnd
@@Zettabitlab so the one where Vin on the MOSFET pin goes to ground (as a shot = beep) that ones is broken! Thank you for that great info! Thanks !!
@@Zettabitlab Can you explain another way pls?
@@MoesKeckeEcke Still don't understand? All Mosfet had the same beep sound.
Thanks Dude...a thousand Times. Had the same issue.
Nice job fixing that GPU man, keep it up. I have some questions about fixing GPUs.
A friend of mine had a GTX 750 Ti, but one day he had a blackout at home. When he tried to turn on the PC, it didn't display any signal, so he bought another GPU and I asked him to give me his 750. After a couple of tests I've noticed that the GPU actually works because the PC starts up withouth problems, but there is not signal. I really want to fix it because where I live the components are too expensive. Do you have any clue of what could it be? Checking the back of the card I noticed that there is a resistor that has a black dot in the middle. Could it be the problem? I'd like to show you some pics of it.
probably too late but,
He bricked the gpu
2:32 What are the values of these fuses for replacement? Art
he dont know. he just throw some fuses
since im having this or a similar problem as well rn, i was looking into it and it seems to be Littlefuse 125v 10A SMD fuses
@@Pongsn it was 12V line . 12*10=120W. i bet no 10A fuses is good
how did he identify the faulty mosfet?
Thanks more power and Godbless..more comes work..:-)
mantap lur. 😘. apa tipe mosfet dan fuse nya? apa sama dengan RX580 sapphire nitro?
good job ...iam subcribe
ty for all U Education
How did you determine that Mosfet was #1 to remove? They all had the same beep on VIN
base on experience,
Excellent video man!
Hello! I had an RX470, it was working normally until one fine day it didn't show up anymore. When it first started it was still up and then there was a whistling in the choke (I think). I changed PSU, applied thermal paste. Each time it boots up only 20s then not up anymore. Can you guess what is wrong with it?
Thank you for the guide. I want to fix gpu also and learn
excellent bro
good schooling on the gpuz man learned somethings
Help.. My sapphire nitro+ rx580 all work fine except FAN and RGB no longer work.
Have you ever had the little 2x2mm AZY chip gone bad? I have one thats heating up and the powerdelivery doesnt work. All Fets and capacitors are fine... Really odd failure point but I can not find what that chip is
Thanks! Is that hot air you are using
Hi! Will you tell me if you know what the values of the c4027 and c4030 capacitors located around the Y5 resonator are?
How did you find all the information on what to check on each component and do you use the gpu's diagram or anything like that? Or are the names of the components written on the components themselves and then check what power should go through where or anything like that?
U should know basic electronics
The GPU card itself is build like a little town. Any manufacturer needs to follow amd so on any card MOSFET is used for power stage..
To repair first check fuse the power and so on..
The info for the mosefet is found via Google and the part number is printed in them so..
Good Channel. Good JOB!
Hello, my graphics card is recognized and works just fine but only through dvi ports, monitor doesn't detect signal on hdmi and displayport outputs. How can I fix this??
I'm doing the same and i just cannot get the VRMs to desolder. I'm using a Weller hot air pencil and also soldering iron to provide more local heat and the VRM is solid! What temperatures and hot air gun are you using? I had the hot air on at 400C for 15 mins before adding the iron to the IC at 450C and only managed to melt the exposed solder pads, the chip is solid.
Wow that is crazy.. He mentioned above you in the comments 360°C with couple of cm distance
Bought a defective palit gt 740 1gb gddr5 worth 4 dollars and when I powered it up no display fan is spinning but when I connect the vga to onboard it has display it seems the gpu is not detected even in the bios. I tried heating the chip but no luck
Any luck? Palit cards are just bad, my palit gtx1060 has the same issue. Never buying palit cards again.
If one were to bridge the fuses with a thin piece of wire will that work temporary?
can u identify the problem?
my GPU is RX 470 Sapphire Platinum Edition
PCIE wont detect the GPU but the fan is running and i can feel some heat in the procesor
my Motherboard is MSI A68HM E33 V2
please reply :')
i got my PSU(500w) drop when i plug my hd7770 , what kind of case do i have?broken Ic power?
Unless it's done off camera, I believe you should use some flux before desoldering/soldering or your solder joints are not going to be reliable
This is amazing bro. Could we contact you for help to fix our gpus?
same here
Nice video by the way ,really nice.I do diy soldering using heat gun and micro soldering.i wish u can help...
so my r9 290 has the same issue and 3 mosfets are shorted. looking in ebay i can find 3553m mosfets(same as my card uses) but the other numbers do not line up. is it safe to use other 3553 mosfets to replace the dead ones or do the replacements have to be exactly the same as the dead ones ?
You are the best
what if all voltage is present? but still nothing?
dead chip.
Dead chip or corrupt video bios
Hi, I have Palit 3080 Gaming Pro 10GB. I wrongly connected +12V to speed signal of double fan socket and GPU died. Now motherboard don't detect GPU. But single fan and RGB LED works when power up.
I discovered the GPU. It has one Holtek HT50F52241 and one IS25WP080 and others.
Your opinion, which chip controls fans? and which begins communication with motherboard?
May my mistake damage main GPU chip?
Do i hope that repair it?
Please answer me.
Thanks for videos.
If you have to replace parts, how do you get them? Which online shop?
Bli Gm , sometimes i use from another card scrab if not i buy from alixpres. Just looking for good seller reputation.
hi man. how about smd capacitors? are they easy to replace? mine card is missing 4 of them i get black screen and beeps from motherboard
Državljanin Banana Republike smd caps it's easy to take off from pcb. Use hot air or double tips soldering iron.
RmodGaming whap +6282223240111
Keren bro
I've got two broken HD 7970's but I can only find two fuses (smaller than those in the video), seems to be no fuses for the external PCI-E power connections.
The MOSFET's seem to be of another type aswell, don't know how to measure them.
Do you have any good advice for me?
Look for the numbers on top of the MOSFET search them and it will tell you what is ground gate and drain
Hi there,
I have found that my sapphire rx480 nitro+ has the same issue but with more mosfets to be repaced. You show that after replacing those mosfets the graphic card came alive, good.
But what if the problems is just not only on the mosfets and fuses. What would be the next step to your troubleshoot?
Thank you for your great video!!!
André Moreira check the mosfet driver IC if you still have no GPU power.
Check if there are more shorts on the board.
Honestly it's simply electronic stuff. Check for power and PowerEN signals.
If all is good try flash the bios. If you still have no picture your GPU could be bad.
@@Todestelzer so, sent the board to an electronic laboratory, and the GPU chip died... Thanks for video.
RX570, no display, not detected on device manager. please help
Hello, I have 2 rx 480 with the R47 choke broken, I've been looking for this choke for months and I can't find it anywhere... Do you know where I can buy it or get it? Thanks bro
Im repairing my dead r9 390 nitro, the vrm for the memory controller died and i've been trying to get the 3553m out for a while now with my hot air station but it wont budge. Should I warm the board up first? any hep would be greatly appreciated.
Yes warm board an use flux
my nvidia 1050ti not displaying sudenly but its processor is heating while running but not displaying what u think ?
Hi, i have same rx 470 with same problem. But after i checked like your tutorial, everything seems OK. So, what next step should i do?
gpunya ka,kl memang komponen yg lain tidak ada kendala, bisa di cek bagian capasitor dkt vram, biasanya short disitu
Hello,my old ati radeon hd 4890 has black screen problem,tried cleaning it to the maximum,but still nothing,and the core is hot to the touch,so its getting power,what could be the problem in this case?it doesnt even want to boot or even show bios or any signs of life
Best regards
I have a 3090 that I'm having issues with. Can you refer me to someone that can work on it or is it something you would be interested to work on?
bro i have msi gtx 970 i have this same issue ...can u help me?
Hi my quadro m4000 burnt somewhere near the display port 1,it doesnt boot nor it use to detect before smelling bad and stopped working all together.Although gpu fan works,second attempt to boot caused it to spin really high with a noise of fan. There are power fluctuations,probably power fluctuation caused it.i can share you the pics on email if u can !!!
what caused this?, was it an overclock that possibly caused this?
how do you know ..that mosfet short..only guessing or what..please tell me sir..i want to learn about service vga
Now I getting 6600xt powercolor problem same problem no detect/ no working. If you have some idea please advice
Thanx for sharing
is 2.4 ohms on vin too high?
i have a card with a similar vrm to fix!
they're also ir3553
Has this issue with an rx480 8GB and I replaced the fuses and blow up a capacitor on the back. Going go back in and check the mosfets as I thought they where ok. Just hope I haven’t fucked it to much
how do you check if it's just the vram went bad or the other components like these?
У меня на плате rx470 отсутствует элемент q201 шестиножка. Находится там где разъем куллера с другой стороны. Подскажите, пожалуйста, что это?
love this video
where i can buy the mosfet and the fuse?
I have 4 burnt MOSFETs but I've only replaced the fuses. It now runs smoothly, should I replace the MOSFETs too?
Then your mosfets arent burnt
Because i had also the same mosfet burnt like in the video and when i replaced the fuses they burnt again because of the burnt mosfet
Hi! Is any of IR3553M drivers are good for replacing the broken one? i've found only IR3553M drivers with different numbers on it.
Yes as it is only transistor type model MOSFET... The different numbers i s week the where made or batch number. Model needs to be same so IR3553M is a must any time!
this is the type of video i want to watch now teach me how to fix no display but detected on windows waha
I think, this is different with your case.. this case is no display, no detect.
But yours is still detect on windows. I think, your case is just about bios/firmware.
hello i have three AMD sapphire HD6990 4gb Dual gpu, one is shorted to ground so how can i know wich mosfet is bad if all mosfet make buzzer when test them any idea??
second fan turn but gpu cold with no display
3rd fan spin gpu hot no display
best regards
Bruh, so I had my asus rx580 sent to warranty for repair. And now it is crashing, 0 OC potential (I have to underclock for playing) and they said that it is working. I added some heatsinks on the vrm and only then I can play. The vrm was originaly bad, they've replaced 3 mosfets. It has 6 phases, I think that just half are working. When I play demanding games the vrm skyrocket to 90-120°C. What should I do?
Hi, I have an XFX 470 8GB which has display runs youtube videos even at 4k..but when i start a game it crashes/artifacts...tried with new bios other pc/drivers...could be a hi-mosfet which fails to deliver enough power to the chip when required?
How much did it cost ?
I mean the repair
I’ve got an rx480 that gives picture before installing Radeon drivers. After drivers load it black screens. I feel it gets really hot around the mosfet area. Where do i start the diagnosis?
Hello there, great repair, i want to ask.. step first in ic FUSE from power normal, and step second fuse from pcie power pin psu normal, and the last step i check the mosfet is short/broken vin and ground connected like a video, maybe because the mosfet is short make the gpu is not working/no detect? i want to repair in home
iya mas, mosfet biasanya short.coba dicopot aja trus diukur ulang.
@@Zettabitlab oalah dari indonesia ternyata, buka jasa perbaiki ga mas?
@@ekasapta8185 sudah engga lg mas.lg rencana mau buka tahun dpn.
dari jogja sy mas.
@@Zettabitlab siap, kabarin kalau sudah buka ya mas
is it usually No1 that blows because it is closer to the power in and the others have some resistance in the longer tracks?
Any advantage to adding more mosfets in the gaps where components are missing?
Any idea why this blew? We are thinking ours blew as we were trying to run 5x 4gb cards on one 650W PSU voltage probably dropped and current spiked.
that's crazy
Thank you master
I want to ask, a gtx 1050ti that died still repairable??
omg this is so cool ! what if my old HD6870 fan stuck at full speed, i tried to alter it using the software control but it doesnt help
yap fan controler locate inside GPU, but there's a 4 cable fan you can modified bios to max your fan speed .
try to reflow the video chip, my 6950 had the same problem and fix it like that
Can you fix gtx650Ti? only one fan spins. No post/display.
Hi, i have a problem with a MIS ARMOR 8GB OC RX580, the fans are not working properly, i bought replacements and they have the same problem, they work for a while and then stop working, apart from that the card performs very good, tried multiple drivers old and new, if i take out the card for a couple of days it will work again, then the fans stop after 10 or 20 min of use, no matter the temp of the GPU the fans will not spin not even at startup, i have the stock Vbios, this card is used dunno if it was a minning card or not, i was wondering if maybe there is a resistance or something that controls de power going to the fans, it allways work i can use it normally and it will remain at 60 deg C, unless i start a game, any ideas what can it be? Thanks !
Sir, i have amd rx 480 8gb gddr5 when i connect 8 pin of smps to the graphic card the 2 fans rotates but when i connect graphic card to the slot on the motherboard fan does not rotates and graphic card is not detected by the computer. Is my graphic card faulty?
hello, I have a problem, I have replaced the mosfet and the VGA runs normally, after my PC turns off and on, the fuse blows and the mosfet is short, what is the cause? thank you

Check another mosfet,
does desoldered like that damage other components?
I have a gtx 970 shows power down the gpu and connect to power adapter but it is already connected and if I plug my gtx 1080 it work normal is there any solution.
sir, how to do you which is the mosfet no1, no2, no3 , no4 , no5 ?