i havent seen all of your videos on your channel yet, but ive seen a few and they are all awesome. What i rarely see on youtube is people doing pressure test to see if there is any leak before pouring in the liquid. It would be nice to see you on the next watercool build and show a small preview of the test for those that don;t know about it.
I’ve been rocking the o11 evo since it came out and want to make a switch. I’m thinking to either go with the new o11 evo rgb or y60. I want to do a custom water cooled build, can’t decide on a case. 😵💫
This is a net negative airflow case. If anyone watches this and replicates this, be ready to clean dust off of every crevice that isn't air tight. Ideal flow would be two bottom and and 280mm rad as intakes and the top and back fan as exhaust. This would create positive air flow as in more air coming in then going out.
Is it 1 being direct die liquid nitrogen under volt ? If so its about 3.5/4.0. Normal water its about 1.3/ 1.7. Good work. Mine is patterned after yours with another 120x45 rear rad and 280x60 side rad. But it is all black and chrome, which we all know is a much cooler color.
hi there. i let you a comment about "monochrome HYTE Y70 Touch Custom Loop Water Cooling PC Build". i'm sorry because the build exists with the distriplate in the corner. i didn't visit your channel. it's great! your video show me better how it is possible to manage the piping. it's clean design! so i know what i should do now. thank you so much!!
May I ask how you changed the airflow direction of the fans even though they are all facing the same way. Were you able to do this using lian li L-connect?
question please im building a loop system and im buying the parts i need here and there i have the same case and distro my questing is i see in the specs you have a EK loop D5 G3 pwm pump and in the picture i see the EK inertia D5 pwm are you using 2 pumps or do they go together? thank you in advance
How did you get the system bled? I've tried running my return in both the top and the bottom but always end up with large bubbles constantly pumping through the system and becoming micro bubbles that never rise to the top and just keep getting cycled back through the system. Working with the Hyte Y60 distro plate has been frustrating to say the least
We just rotated it around many many times . We also ran the system at a lot of different speeds and opened the fill hole to let air out. We worked like that until we were able to get a majority of the air out. There is now only a couple mm of air in the disto plate. But yes the Y60 distro is not easy to fill!
@@archetype_origins did you try having the return in both locations, top and bottom? I had it on the top at first but couldn't ever get it bled, so now at the bottom but with the same issue lol. Thanks for the reply, glad I'm not the only one who had trouble so I know it wasn't from a mistake I made but rather maybe a design flaw.
My return is the top middle hole. I had an issue of a air bubble being stuck right at the curve by the entrance of the pump but after running it and tilting it a bunch of times was able to get it out
@@archetype_origins Had that same issue too with top return. Bottom return definitely isn't the answer as the bubbles get sucked right back in so I'll have to switch back to top return or get used to my pc sounding like a leaky faucet lol. Will try out varying the pump speeds as well. Thanks again for the replies and tips.
if you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you! archetypeorigins.com/inquiries
Amazing build and video ❤, i was wondering if yall would sell this exact pc as a prebuilt or if yall do sell pc's. As I'm too scared to watercool myself. Much love🫰
Thanks for the support! Yes, we do sell pc and if you’re like the exact same one we can certainly do that for you if you are located in the United States of America. Go ahead and submit a build inquiry and we’ll get back to you!
![Insane Open-Air Custom Loop Water PC Build [RTX 4090 | Ryzen 9 7950X3D]](http://i.ytimg.com/vi/gqji3kbb_vA/mqdefault.jpg)
![Insane Open-Air Custom Loop Water PC Build [RTX 4090 | Ryzen 9 7950X3D]](/img/tr.png)
![INSANE HYTE Y60 Distro Custom Loop Water-Cooling PC Build [RTX 4090 | Ryzen 9 7950X3D]](/img/n.gif)
Rate the CHILLNESS of this system from 1-10! ❄(1 being the coldest)
Def a 1, I am going to build a pc in a month and have never built one before and I think I will use this design
@@Lliw1your first pc build is going to be a custom Waterloop? Goodluck 😂
Build so cold it came with a sweater 🥶
Now she needs a hat!
the custom tubing is done very well its so clean.
Thanks!
@@archetype_originsA lady's touch says it all! 👍
Is is legitimately what I envision my dream PC to look like, amazing video guys.
Thanks! 😉
Amazing build! You guys deserve such a bigger audience I'm hoping you guys continue to grow in 2024
This kind of comment is what inspires us to work harder 💪🏻
Beautiful build! Love the all white aesthetics!
Thanks man! ❄️
Finally, all radiator exhaust, no hot air intake, nice one using rear intake, my dream airflow configuration ❤❤
i havent seen all of your videos on your channel yet, but ive seen a few and they are all awesome. What i rarely see on youtube is people doing pressure test to see if there is any leak before pouring in the liquid. It would be nice to see you on the next watercool build and show a small preview of the test for those that don;t know about it.
I've seen this case in a bunch of setup video's but this was sick! Love the video editing too. Great job!
It’s a really fun case! Thanks for the support! 🥰
Krasse Karre, macht weiter so.
Will do! 🫡
Great build! You guys deserve more subscribers!
Thank you 🙏🏻
Beautiful build! The computer is cool too
Thanks friend 🙏🏻
Amazing build 🎉
Thank you! 😁
THIS IS A CRIME, WHY DID U PUT THE BACK FAN FOR INTAKE?
This is probably the best build I’ve ever seen ❤
Well cause I was going to build one my self so I might use this idea love it
One more dream pc that algorithm throws to my feed that i will never be able to acquire. Thank you youtube for boosting my misery. Enjoy the PC.
I would have a heart attack unscrewing the 4090's plates. Recieving my y60 next week I hope it'll look as good as this one !
It seems more terrifying than it really is! Hope you love your new case!
I come from France. I found your channel by chance but I don't regret it because you do very good and beautiful work. Keep going!!! / CHILLNESS : 3
Thank you friend from France!! 🇫🇷🥶
Came for the build, stayed for the nail ASMR.
My dreams are to have a computer like this 💔😢
We hope you wrestle able to fulfill your dream soon!
Nice build!
I'm glad you like it
Nice Work.
Thank you! Cheers!🥂
I’ve been rocking the o11 evo since it came out and want to make a switch. I’m thinking to either go with the new o11 evo rgb or y60. I want to do a custom water cooled build, can’t decide on a case. 😵💫
The Y60 is actually quite small so keep that in mind for your loop
Awesome build guys..
This is a net negative airflow case. If anyone watches this and replicates this, be ready to clean dust off of every crevice that isn't air tight. Ideal flow would be two bottom and and 280mm rad as intakes and the top and back fan as exhaust. This would create positive air flow as in more air coming in then going out.
love the build, but isn't it better to have more intake fans then exhaust fans if you don't have an even amount of both?
agreed 1 intake fan is not enough.
Can you do a stealth build, using a Gigabyte B650E AORUS Stealth Ice for a clean cableless setup 🙌
Something to consider for future builds 😊
Nice build, just curious why you didn't put two 120's/140's in the basement and use those for intake ? Anyways, great build really enjoyed watching
There are indeed 2 120mm fans in the bottom compartment. We have considered switching them out to Noctua high performance fans
Is it 1 being direct die liquid nitrogen under volt ? If so its about 3.5/4.0. Normal water its about 1.3/ 1.7. Good work. Mine is patterned after yours with another 120x45 rear rad and 280x60 side rad. But it is all black and chrome, which we all know is a much cooler color.
Love the black and chrome, have a build coming like that so stay tuned!
planning to do a build in the y70 with a 7900xtx with this same aesthetic😁
We are so excited to do Y70 builds also!
Damn, I loved the setup in the beginning of the video, do you think you could do a tour? :D
Yes!!! We will do one soon!
this setup with the Matrix RTX would be dope
nevermind wasnt on the rebuild part yet
The matrix is still one of the most gorgeous GPU
1, love the build
2, thank you friend!
Deserves more
What do you want more of? We can try!
No i am talkin about love@@archetype_origins
Yes, please send us love here: __________
every time i see this case in full white i hate myself, i bought the white and black version before the full white one came out…
iced out PC
🥶❄️
hi there. i let you a comment about "monochrome HYTE Y70 Touch Custom Loop Water Cooling PC Build". i'm sorry because the build exists with the distriplate in the corner. i didn't visit your channel. it's great! your video show me better how it is possible to manage the piping. it's clean design!
so i know what i should do now. thank you so much!!
Glad we can help out people who’re looking into doing custom loop water cooling! Happy gaming!
amazing
Thank you! ☺️
May I ask how you changed the airflow direction of the fans even though they are all facing the same way. Were you able to do this using lian li L-connect?
Airflow direction is based on your fan orientation
BastiGHG Intro Sound :)
Can you provide the temps for the build? Have the same EK CPU block with the same CPU and wanted to know what kind of temps you're getting.
4:25 is that fan at the back something new? I thought the way she fit in, it is acting as exhaust instead of intake?
No, it has been on the market for quite some time. It’s called ‘reversed fan blade’
No, it has been on the market for quite some time. It’s called ‘reversed fan blade’
how to you make those asmr sound like? what mic are you using and do you edit the sound to make it sound like asmr?
Equipment links in description!
I wanna add tubes to my build so bad but its my first build ever lmfao
Anyway I could get a rubdown of what fittings i would need to do this?
Absolutely, I recommend reaching out to us to schedule a build consultation so we can get the help you need for your next project
question please im building a loop system and im buying the parts i need here and there
i have the same case and distro
my questing is i see in the specs you have a EK loop D5 G3 pwm pump and in the picture i see the EK inertia D5 pwm
are you using 2 pumps or do they go together?
thank you in advance
The inertia D5 is a small form factor D5 pump and body suitable for builds that have limited space. The D5 G3 is just the pump itself
@@archetype_origins so what would work most suitable for a y60 distro and case? will the inertia work with the distro? thanks
You’ll need a stand alone d5 pump or DDC pump for the y60 distro
Daaaaaaaaaaaaammmmmmn
Yesssssssssiiiiiirrrr
Do you build and ship it to Switzerland
Unfortunately at this moment we are only shipping within the continental US
What is the price for full setup ?
5 figure build and you use stock cables and an extension good job 😂
I thought the white deep cool stock cables are kinda cute! 🥰
How many fittings did you need cause it look like you had a lot
I just counted and it was a total of 32 fittings. That is including all the plugs as well 😅
@@archetype_origins ok could you tho just tell the fittings only pls?
32for the whole build?
Oops that that’s alot
How did you get the system bled? I've tried running my return in both the top and the bottom but always end up with large bubbles constantly pumping through the system and becoming micro bubbles that never rise to the top and just keep getting cycled back through the system. Working with the Hyte Y60 distro plate has been frustrating to say the least
We just rotated it around many many times . We also ran the system at a lot of different speeds and opened the fill hole to let air out. We worked like that until we were able to get a majority of the air out. There is now only a couple mm of air in the disto plate. But yes the Y60 distro is not easy to fill!
@@archetype_origins did you try having the return in both locations, top and bottom? I had it on the top at first but couldn't ever get it bled, so now at the bottom but with the same issue lol. Thanks for the reply, glad I'm not the only one who had trouble so I know it wasn't from a mistake I made but rather maybe a design flaw.
My return is the top middle hole. I had an issue of a air bubble being stuck right at the curve by the entrance of the pump but after running it and tilting it a bunch of times was able to get it out
@@archetype_origins Had that same issue too with top return. Bottom return definitely isn't the answer as the bubbles get sucked right back in so I'll have to switch back to top return or get used to my pc sounding like a leaky faucet lol. Will try out varying the pump speeds as well. Thanks again for the replies and tips.
i dont understand, why use a strix if your going to watercool it anyway?
Because EK only make white waterblock for the Strix/TUF GPU
Me trying to find the distroplate lol
worried about nails 🐔
5:12 pov ur too broke to afford a touch screen
You can tell this girl watches too many ASMR vids with all that fingernail tapping lmao
It’s so satisfying !
how much did all the build cost please
Around $7k at the time of building
why black mother board?
White one doesn’t exist yet
How much did the whole build cost
arm and a leg
Yawn! White is so 'Last Year'!
Build the Hyte Y70 Touch, you know you want to so do it! Just do it Cindarellie!
See you in next video!
what’s the total price?
It's a budget build so not that much.
How much your build?
send us an inquiry archetypeorigins.com/inquiries
Can you do 4 32 gb ram instead of 2?
It depends on the frequency and compatibility with the motherboard, I’d recommend checking the motherboard specs to for more details
@@archetype_origins ok
CORSAIR Dominator Titanium RGB DDR5 RAM 32GB (2x16GB) DDR5 6000MHz CL30 Intel XMP ???? why not taking AMD EXPO !!
That’s because they don’t make Corsair Titanium RAMs with AMD EXPO in white
@@archetype_origins I have bought Kingston Fury 6000Mt in white Amd Expo. take look they are incrédible.
Never tried that one, maybe one day!
the sound is loud af bro .
Maybe try turning down your volume? 🤔
@@archetype_origins you know what I even changed my audio system still too loud for me hhhhhh sorry
Hi there my dad loves you content… can you please build him a PC
if you are looking to get an estimate for your PC, kindly fill up the build inquiry form and we will get back to you as soon as possible! Thank you!
archetypeorigins.com/inquiries
Now CHANGE THE RAM 😁😁
Change it to what? 🤔
you guys ask people for alot of stuff. Is that really all it takes???
Gotta ask nicely too 😉
building new PC parts with these nails... That's very dangerous
Amazing build and video ❤, i was wondering if yall would sell this exact pc as a prebuilt or if yall do sell pc's. As I'm too scared to watercool myself. Much love🫰
Thanks for the support! Yes, we do sell pc and if you’re like the exact same one we can certainly do that for you if you are located in the United States of America. Go ahead and submit a build inquiry and we’ll get back to you!
Plötzlich @BastiGHG Intro