Over The Top Custom Skoolie Roof Top Deck with in deck lighting | Short Bus Conversion
Вставка
- Опубліковано 23 сер 2024
- Building a custom roof top deck for my short bus conversion. In this video, we build a custom roof top deck for my new short bus conversion. This step by step roof top deck building with have everything seating to in deck lighting from SMY Lighting. If you are looking to build a school bus conversion and need a roof top deck this video is for you.
⚡️ Recessed Deck Lights from SMY Lighting: smylighting.co...
✅ Subscribe To Follow Our Builds and Travels: / @navigationnowhere
🤗Join Our Patreon Community to Get Extra Content: / navigationnowhere
Check Out The Entire Bus Build Series HERE:
🎥 Ivan Build Series: • Short Bus - Build Series
Similar Videos:
🎥 I Bought A Bus: • Short Bus Conversion |...
🎥 Pre-Conversion Bus Tour: • Pre Bus Conversion Tin...
🎥 3-D Design Tour of Completed Ivan Bus Build: • School Bus Conversion ...
🎥 Installing A Bus Subfloor: • Installing the SKOOLIE...
🎥 Where to Find a School Bus For Sale: • Finding Bus Conversion...
🎥 Gutting School Bus Electrical: • Will The Bus Start Now...
🎥 What to Look For When Buying a Bus: • School Bus Buying Guid...
Looking To Buy A Bus?
🚌 Check Out Our FREE Bus Buyers Checklist: navigationnowh...
🚌 Check Out Our FREE Bus Builders Tool Guide: navigationnowh...
Current Special Offers:
⚡️ 5% OFF Pioneer Mini Split Air Conditioners:
Link: bit.ly/2EieZDs
Discount Code: Navigtion5
⚡️ 5% OFF Skoolie.com:
Link: www.skoolie.com
Discount Code: Navi5
🛠️ Bus Build Products:
✅Cabinet
Pocket Jig: amzn.to/3mQdFJk
Concealed Hinge Jig: amzn.to/33Om2gN
Edge Banding: amzn.to/3otDtv1
Banding Cutter: amzn.to/3gjcT4Y
✅Water
Inlet: amzn.to/3qxoJ04
Tank: amzn.to/37AnXH2
Filter: amzn.to/2JVvzfa
Pump: amzn.to/2JQssFc
Accumulator: amzn.to/2VHCDyw
Water heater: amzn.to/3fe0Cyj
✅Electrical
Fuse Block: amzn.to/2VJNZlx
SMY Lighting: amzn.to/3n2qUa1
12v USB Outlets: amzn.to/33OyltE
Puck Lights: amzn.to/3sSJtRa
✅Demo
Socket Set: amzn.to/3mPUxLs
Scrapper: amzn.to/3mPad1j
Heat Gun: amzn.to/2VKlzrJ
Grinder: amzn.to/3mOukNb
Eraser Wheel: amzn.to/39OSBzg
✅Road Safety
Safety Triangles: amzn.to/3m0A5qJ
Good Sam Roadside Assistance: bit.ly/3fsb45i
Scan Code Reader: amzn.to/3kX0YKQ
Headlamp: amzn.to/2V6XtqZ
Pig Mats: amzn.to/3lX3y4Q
✅Exterior
LED Tail lights: amzn.to/3ev9OfM
LED Reverse Lights: amzn.to/2Cb1rJ8
Side Flood Lights: amzn.to/32p6D6G
Head Lights: amzn.to/3fZrhP1
LED Relay: amzn.to/3jdopA6
LED Marker Lights: amzn.to/3fWtr1A
Light Bar: amzn.to/32XY9Dg
📸 Follow On Instagram for More Behind The Scenes Content: / navigationnowhere
This Media And Description Above May Contains Affiliate Links. If You Click On One Of Them, Navigation Nowhere May Receive a Commission At No Additional Cost To You. Thank You For Your Support.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
That's a great Dad!!
I wish I had a dad like yours!
Poor Dale. He must be really afraid of heights. If he would've gotten any flatter he would've been one of the deck boards himself! Good job climbing up there and helping out Dale, despite your fear!! And you've gotten your dad and sister in on the vids, when do you convince mom to show up and be part of the action??? Building your bus has to be a family affair!! Thanks for another great vid!
Baba Ganush 🤣 every set needs a good caterer!
Go Dale We Love You !!
@Eric Luke So what did u find
Love the Alien landing lights! Just kidding! Came out awesome!
“Yeah ... Whatever.” Love Dale so much. Also, you’re dad is a giving individual. You are lucky to have him.
Enjoy working with your Dad,I lost my Dad 2 weeks ago and i loved working and building things with him,miss him terribly
Nice landing strip 😂
Dale cracks me up. He’s a great addition to the videos, reminds me of my uncle Larry. Also thanks for another really helpful video!
Dad, Dale and you ....😂😂😂
What an awesome team!!! And of course Navi #2....
be well everyone💞
Wish my dad was around... he still at the corner store after 15 years... 😂 Check out some of our rusty car buckets and let me know what you think
Such a beauty of a deck! Better hurry before it snows up there!
I know right ! We have it scheduled to be dried in and foamed before it gets to cold! You know Dean it’s coming quick around here
I met your dad at the Daytona 500 race not long after you got Navi done. He's the one that told me about the build and got me following your channel. Keep up the videos.
Great job on the deck & lights 👍☕️
If all these little things make you so happy Mike, you're gonna explode once Ivan is done :-D its always great to see ya knocking out your projects!
Smart keeping the jack under the bus even though you have a jack , a good insurance policy.
awesome job Chris and Dale. Michael thanks for camera work. that is looking good guys very nice lol love you guys 🛠️🇨🇦🛠️🇨🇦👍👍
Thanks Badge. It’s always fun working with Dale and Dad.
You have a great dad that is helping you and keeping you on some what of a schedule my dad passed when I was 17 but he was that kind of a guy I’m 69 now so excited for you to be getting this going you are making so much great progress I enjoy your videos so much I am learning so much for an old lady god bless you all the lights look great can’t wait for your next episode ❤️❤️❤️🙏🏾🙏🏾🙏🏾🌈🌈🌈
You mean that was Dale @ 10:32? I thought it was a super model posing!
Yet another enjoyable vid. Loving this series. And your excitement is infectious.
I’ve watched a few of your videos, but I just bought a short bus to convert and EVERYONE mentioned you, so here I am. Back for more lol
Those lights and deck looks absolutely amazing!!!! Feels just like home. ❤️❤️
Good dads are few and far between now days cherish them, I lost mine in 1993 and still miss him all the time
Not sadly, but sadly, I never had a dad to teach me “stuff”. Cherish your time with all family and friends. The deck is beautiful..👏🏽🇨🇦🚌🇨🇦👏🏽
You really love getting under that bus dont ya😂 but keep up the good work man love the videos and this series
Yeah , it just seems to keep calling me back.
Nice job. The lights are very cool.
Dude. You amaze me on all the things you can do. 👍🏼👍🏼👍🏼👍🏼
Cool dad!!!
Dale is so kool 😂
Always impressed young man. Well done!
Thanks, learned from those like Dale and Dad.
@@navigationnowhere good to here a son appreciate all his dads wisdom and help
I know this is an old video, but the level of thought and detail you put into this build is just amazing!
Love those deck lights! Supper cool
The deck looks great.
wow the lights look fantastic well done team
Looking great. To bad they didnt make those lights so you could change the color, anyways epic the way it is. 😎
Coming along nicely. :) Also can I just say that I'm so glad you're left handed like me lol. It makes things make so much more sense to watch.
love your videos and attention to detail, happy day when I'm surprised an upload is available for viewing ! Keep up the good content, great to have your father there :-)
Good ol helpful Dale
Love the progress.
Cool lights!! A landing strip for air planes!! Lol love it 😍
a roof top tent would be a cool thing up there!
Now that’s a good idea
You need two more of those lights for you outside table : ) opps
Wiring today haha. 😂
Impact wrench makes a impact on the ground.
Ya buddy been hankering for more vids bus daddy
I admirer your talents.
I have 24'8" bus and I'm using the entire rooftop for solar 6x260 watt panels. My wife doesn't like heights so our deck will be outside the back door. It will stowe under the bus and can be pulled out when in use. Just an alternative to those of us who don't like heights.
Soooooooooooooo coool I love busses 🚌
Another great video...
just watched the whole build series, this is awesome! i'm doing the same thing with the same bus! except i have the 2003 collins not 2004 but it looks exactly the same! you answered a ton of my questions. i feel a bit in over my head never having worked with wood or electrical or welding before, but i want to be as thorough as you so that my bus lasts as long as possible :) thanks so much for all of the detailed explanations with this model, it's super super helpful and isn't going unnoticed! every extra little bit of info is so useful :) :) i subscribed and put on post notifications. thanks so much again good luck continuing the project and keep up the amazing content!
Looking great! Çant wait how you mount everything up top!
Still might need some edge lighting so nobody falls off the edge. But great work! Very inspiring
Why not use invisible fasteners for ur deck boards? Luv ur work and knowledge. 👌🏼
Add lighting to Navi Senior if you want to. :)
Let there be light! People flying over in small planes if you are parked in the woods will think “UFO”!! 👀👍
It will be a landing pad haha
Eddiequest must have been in the navy cuz that's what we had on ship. He's right though. Make sure switch is water tight. Great build.
Nice lights, but I feel that since they are pointing up, they will blind you instead of lighting up the deck.
Or is there something I'm missing?
You're absolutely right, they will be blinding i.s.o. lighting up the deck, not practical at all. Also, placing that propane tank on the roof is asking for problems safety wise.... These are not very wise decisions he eventually will come to regret......
Definitely blinding. Also if anything they should be at the perimeter so you know that stepping inside the square you're safe.
Did you do the math to make sure the ribs of the bus will support all the weight of the deck? BTW the deck is awesome.
Yes
Look at Dale tempting the ladies with his seductive deck sprawl.
lol
I really love your deck idea, and that's what I'll do on my shuttle bus. But, ... BUT I have the lights. If I want to look at the stars, I don't want to be blinded by these lights. I'll go with some siding lights that only lit down the floor, not lit up in my face. But the deck, no.1 idea for me. Tks.
Ivan the Terra Bus!
not sure if its a good idea to mount a propane tank up there and have it sitting in the full sun
might be better to put an automotive propane tank under the bus (you need you temporary unscrew the feed part from the tank and remove the pickup tube inside it to stop it sucking up liquid gas) and only have a hookup point for a rubber line with a tap to open it (if you where planning on putting a grille up there)
not sure how it is in the states but over here we can fill our own auto style propane tank at the pump station (should save you some money too)
HI Mike. Love watching your bus build. Look forward to new videos. Have to ask.......Is something wrong with your right eye? (I'm an RN, so it's hard not to notice) It seems a bit swollen or am I just imagining that. Be well.
6:20 lol
How did you figure the curve on the metal roof ? Did I miss it somewhere ? I think I would like a deck too , after watching y'all ! Thank for sharing your video's ! I'll be so happy when I can start on mine ! Have a good one and keep up the good work .!
So every time you need propane you need to get on top of your roof?
You " CAN'T " really see those lights at night (17:22) ?
So why in the HELL would anyone want to buy them ?!?
B. T. W. ..,
WOW ! What a really big DECK you have, It's COMING
along so QUICK ! And, You're doing all by HAND too?
Very nice JOB !
Nice build, well thought out with the single exception of the gas tank. Others have mention low clearance, but there are still bird strikes and road thrown gravel to worry about too. (I know that 11 plus foot is a streach but I have seen it done.) My suggestion is to get a galvanize steel bumper tool box to put your gas bottle in. That way it is protected against anything but a low clearance bridge. A better suggestion is to use a larger bottle placed in the "possum belly" and refill smaller bottles for the roof deck from it. (Possum belly meaning an under body compartment, most often used as extra storage or luggage carrier.) Just food for thought.
It will all be protected when it’s all finished.
@@navigationnowhere I never thought different, I knew you would protect it somehow, but, to me, it is still very concerning.
By the way I thought I saw you just the other day in North Mississippi, same kind of bus and almost the same color.
Great build. Do you have to take the tank(s) down to have them filled? Here they have to be weighed so the attendant doesn't overfill the tank.
btw, aren't you going to put solar on front part of that deck?
Glad to see you've got an update..been waiting for the interior build. God Bless!
The steel brackets and support beams for the deck have angular considerations.. any data or reference as to how and where they were made? or obtained?..
Brake lines suck so bad to do!! Feel your pain. Lol
Hiii!!!!I love your work and attitude about everything during your builds!! I’m currently trying to build my mini bus conversion but don’t have space around my area in New York(I live near Manhattan)I just want to know how you would be able to find a spot to be allowed to build your converted bus???
Sure hope your deck isn't mistaken for a plane landing strip! !!!
We're planning on using this method for a 10' x 8' deck. I know your original engineering was for an 8x8 but then you added the extension to be about 10ft. Would you engineer the mount any differently for a 10x8 deck?
Dale is hot lol
Ok I have looked EVERYWHERE on you vids.. Where is the FINISHED WALKTHROUGH for your TINY bus? Thanks in advance 💗
It has not been finished yet. Will be this spring. I’ll be putting in the counter tops next week.
@@navigationnowhere oh okay well that definitely clears that up for this dummy !😆 I really want a short School Bus but for me no wet bath. And I know there is room in a short to achieve that. Also room for a stackable w/d or all in one unit.. I definitely want a home on wheels! With all the conveniences. Easy to drive which those are. Thanks so much for sharing I can't wait to see the finished bus. But that's probably going to be awhile since you're working on your friends bus for now.💗
I have that one done by summer because I have to move in! 😂
2 problems I see:
1. The lights shine vertical making it difficult for you to see the deck floor and elsewhere.
2. Running the lights in series poses the issue if one light goes out then they all go out. 80's and earlier Christmas light dilema...
Otherwise GREAT WORK.
FROM NEW ZEALAND - Where do you source your Music? What video gear do you use (camera, GoPro, Drone, etc? What editing software do you use?
i wouldn't want to be looking down at the deck and be blinded by INDECK lights while i'm searching for something.
you know...a bikini clad model inserted where Dale was lounging would do wonders for the viewership!!!! ha!
I'm wondering why you didn't put a small gap between the deck boards so that water could go through rather than over the boards.
They have enough room for the boards to expand back and forth small gaps. As for water dripping through, my other bus as a similar deck design and I never had an issue with drainage
Hi!
Yay, the deck is done and looks great!
Great tipp how to lay out the boards with the u curve up, I never thought about that!
The lights are dope!
Has anyone ever put temporary railings on one of those decks? I'd like one BUT I am that one person who'd either walk or roll right off of there!
Adding railing right now. Coming out in next video. They will be permanently installed
Should have wired in parallel shouldn’t you? Now if one light blows all of them will not work.
How much did the total deck process cost?
Rip impact lol
Rip on the Drill
The house roof beads a coat of paint
Will there be solar panels on the roof also?
Yes they will he mounted in front of the deck location
Do you have a link or name of the lights on the side of the bus?
Recessed Deck Lights from SMY Lighting: smylighting.com/
Did the drill break the one that fell off
Both lol Check out some of our rusty car buckets and let me know what you think
Sorry but i don't understand, what is the thickness of your beam 2x3... Thanks
The beams are 1/8 in thick
It looked like you used screws on the hoist hangers for the extension and into the end grain of the beams. We're these structural screws? I am running into projects where DIYers are using common screws for just about every fastening task. We're going to be seeing some serious problems arising from that practice.
Do you water proof your boards? Or just stain them?
They are stained with a deck sealer
Gotcha, thanks! Putting mine up this weekend if everything goes according to plan 😁
FOURTH!
honestly, i feel like a deck on any roof on any size vehicles is such a wasted space that could have solar panels to make more power. yeah i get u wanna lay up there and look at stars, but like it still can be done on ground too
Why the gas on the rooftop dont do it
Hi Navigation Nowhere can I hire you to build a bus for me and my kitties??? Please message me.
One accidental "Low Clearance" with a propane tank on the top is going to ruin your whole day.
The final deck will be 11.2 ft and I’ll be adding a railing in the next video. But, it would make for a bad day otherwise😂
@@navigationnowhere Is the rail going to be 'bumper' strong? I doubt it. Hitting anything at speed is definitely going to ruin your day. Low Clearance signs aren't always accurate. Had a paving grew reduce clearance by 3" nearby, no-one noticed until a truck went under that would have been fine with the old measurement...
Not much room for solar on that roof! !!
Looks like you shaved some tail lights since we saw the bus last...
nah, he showed them getting replaced with LED's.
Do not for get the height of your bus, (when you or driving around with a propane bomb on top of it)!
The deck boards are upside down