Honestly i didnt really get how often White light ADs happened, until i started running night vision and doing stuff at night. The axon is almost a must for those that want to run a pressure pad on the white light. The dual lead is definitly going to be a purchase i make soon.
Use “silicone fuse tape” on the wiring. Won’t melt or burn like gaffer tape. And no adhesives to “melt out” of the tape and cause a malfunction of your gun. That’s why modern oven mitts use silicone grippers. Withstands heat up to 500°F.
I've never tried the gaffers stuff but, I did get ahold of some black athletic tape and I've had good luck with that stuff. I've never had it in saltwater though...
Get the version that has the dual pad. He's not running a pressure pad for the light. That's the whole reason for axon pads. You can get the hot button or mod button that does what he just did, there's extended variants. The whole reason for axon pads, is for a dual pad that gives laser and light, momentary and constant for both. If you are running a NGAL or Dbal, you get the visible override (as long as you order the correct version). When you press white light, it activates the visible laser with the light. Even if the LAM is on IR settings, overrides it. With him NOT using the light/laser version, he has no visible override, like the factory NGAL pad has. Makes no sense if you have an NGAL or Dbal to lose the override feature, especially with the NGAL. Because it's built into the same cord. Thats why the connector is no longer a crane plug.
@@roguedefensefirearmsllc6194 In another video he stated why he doesnt like pressure pads for his light. He doesnt want in a high stress situation to squeeze his gun too hard and have an accidental discharge of his light.
For the zip tide problem, there is a solution you can put one part of the blade of your scissors on the fat part female part of the zip tie and then the other blade of the scissor on the male end of the zip tie and cut it'll cut it smooth and. You won't feel a thing.This is coming from an electrician that uses sympathize all the time
The thumb thing....key in on that fyi...with the C grip...in a hurry you will figure out that you can just point your thumb on a target and make some damn good shots. Especially if you put the time into the technique.
Figured you'd use goon tape or hockey tape. Much better than gaffers tape and it won't leave residue. Comes in 1 inch, 1.5 inch and 2 inch. And in multiple colors.
Wait you you use your left hand to turn on the flashlight but what about when u switch shoulders to your left and your right, then how will your turn on the flashlight?
You appreciate us? If it wasn't for guys like you and Kyle, we'd be a communist country... THANK YOU for serving, we appreciate you! I get what you ment tho... God bless guys, keep up the great work!
Breaking your brand strat there GBRS. Zipties?! Really!? Where is the "Titanium Superior Zip Bands" or "CNC Machined Friction Tape". Zipties are too pedestrian.
Not a fan of the extreme height over bore new hotness that's become so popular. I think the new hotness will quickly become the new scrapped idea again. For the 3rd time now?
Honestly i didnt really get how often White light ADs happened, until i started running night vision and doing stuff at night. The axon is almost a must for those that want to run a pressure pad on the white light.
The dual lead is definitly going to be a purchase i make soon.
a ranger band is spot on for this , it takes more time to remove furniture to fit it but rub is better than the gaffer tape, give it a try.
If you use pliers, grab as far down on the zip tie as you can and give it a few spins, it’ll break off flush and doesn’t leave a sharp edge.
Knipex makes some dope ass flush cuts for cutting your zip ties.
Hi rep guy
Use “silicone fuse tape” on the wiring. Won’t melt or burn like gaffer tape. And no adhesives to “melt out” of the tape and cause a malfunction of your gun. That’s why modern oven mitts use silicone grippers. Withstands heat up to 500°F.
I've never tried the gaffers stuff but, I did get ahold of some black athletic tape and I've had good luck with that stuff. I've never had it in saltwater though...
beautiful piece , one day 🥷🦅
Damn the rifle !!! Unobtanium!!!!
Can’t wait to throw one of these on my setup
Get the version that has the dual pad. He's not running a pressure pad for the light. That's the whole reason for axon pads. You can get the hot button or mod button that does what he just did, there's extended variants. The whole reason for axon pads, is for a dual pad that gives laser and light, momentary and constant for both. If you are running a NGAL or Dbal, you get the visible override (as long as you order the correct version). When you press white light, it activates the visible laser with the light. Even if the LAM is on IR settings, overrides it. With him NOT using the light/laser version, he has no visible override, like the factory NGAL pad has. Makes no sense if you have an NGAL or Dbal to lose the override feature, especially with the NGAL. Because it's built into the same cord. Thats why the connector is no longer a crane plug.
@@roguedefensefirearmsllc6194 do you what upper he is running?>
@@roguedefensefirearmsllc6194 In another video he stated why he doesnt like pressure pads for his light. He doesnt want in a high stress situation to squeeze his gun too hard and have an accidental discharge of his light.
For the zip tide problem, there is a solution you can put one part of the blade of your scissors on the fat part female part of the zip tie and then the other blade of the scissor on the male end of the zip tie and cut it'll cut it smooth and. You won't feel a thing.This is coming from an electrician that uses sympathize all the time
Take needle nose pliers and twist excess tie wrap until it breaks to prevent razor sharp edges.
That seems like some crazy height over bore.
Great video thanks 🤙🏻
The thumb thing....key in on that fyi...with the C grip...in a hurry you will figure out that you can just point your thumb on a target and make some damn good shots. Especially if you put the time into the technique.
I used to get teased 30 years ago for using gaffer's tape on my guns. I'm a musician so gaffer's just made sense
I've got the gaffer tap, works awesome. What is the other camo tape?
Camo Form
Great info. Thanks for all the details. What suppressor is that?
Knights
DJ what distance do you zero you NGAL at? Are you zeroing your red dot at the same distance?
Great vid as usual! What flashlight setup do you recommend for a 12G autoloader?
Lets Go!
Great video. Thanks for sharing
Figured you'd use goon tape or hockey tape. Much better than gaffers tape and it won't leave residue. Comes in 1 inch, 1.5 inch and 2 inch. And in multiple colors.
Gaffer doesn’t leave residue. That’s half the reason people use it
How is it better than gaffers tape?
Why not use thermal protection over the cable ? I don't get it, just use Heat-Resistant Wire Cover or Auto Heat Sleeve...
Wait you you use your left hand to turn on the flashlight but what about when u switch shoulders to your left and your right, then how will your turn on the flashlight?
Gaff tape is the goat tape.
What about doing some braided cable sleeving and shrink tubing to protect it?
what stock check pad is that?
@1:27 oh oh here she comes ... Hall and Oates lol
Strip of tape, cable on tape, tape over cable= no zip-tie and no cable falling onto barrel.
You appreciate us? If it wasn't for guys like you and Kyle, we'd be a communist country... THANK YOU for serving, we appreciate you! I get what you ment tho... God bless guys, keep up the great work!
Is that a DeepSea on the wrist
Where did you get your cover (hat)?
Not letting go of “comfortarility” lol another new military word added to the books
DJ, what handguard are you running on that rifle?
It's a kac military only handguard that's impossible to get.
FF RAS 5 RAILFROM KNIGHTS ARMAMENT. GOV'T CONTRACT😢
Anyone know what muzzle break and suppressor that is?
Have the NGAL Axons already sold out again??
Love you DJ
What handguard did you use in your AR sir?
KAC FF RAS 5
Breaking your brand strat there GBRS. Zipties?! Really!? Where is the "Titanium Superior Zip Bands" or "CNC Machined Friction Tape". Zipties are too pedestrian.
Zipties too 80s/90s
What is the name of the camo wrap over the tape?
It’s camo coband lol
What stock is that?
I thought u said u dont run switches?
When he was in...
What kind of suppressor is that?
It’s not a suppressor.
It's probably a kac that's only available for the military
@@tacticusunum fleshlight
It’s a kac suppressor
KAC MCQ QDC PRT suppressor if I’m not mistaken.
What is the handguard on this one? Thanks!
KAC FF RAS 5
2012 called, they want their cable management technology back…😂
What’s better?
if it works, don’t fix it.
Killing hasn’t changed since 2012 bruh
@@ABC-dw7pe I’ll take your word for it…
I use wireless..
I use T-Rex Waterproof tape
What is that suppressor
Knights Armament
Whats kind of AR Brand is this?
Knights armament
Did these sell out already?
Not on market yet
what gun brand is that?
Upper is KAC
What is this hand guard?
BCM
what upper is that?
KAC
Respect 🫡
What's is the black tape?
I don't understand why anyone would use tape on their gun.
Perhaps the man who’s spent years handling a gun for a living in life or death scenarios knows a thing or too….
To comply with the mandate to look cool, duh.
Why not just use cloud defensive cable management system/pressure pad?
What buttstock is that? I’ve seen it around UA-cam but no one’s said what
Newest magpul stock released this year
Scuffed
Just because these guys had legit military careers doesn’t mean that they can’t also be massive grifters
No one is forcing you to watch their content or buy their products lol
@@C-24-Brandan thanks white knight
Just because you think you're smart doesn't mean you can't also be a massive idiot
@@C-24-Brandan crybaby
the riser shits gotten out of hand
Cole has a good video breaking down why they developed this mount and it makes sense.
Not a fan of the extreme height over bore new hotness that's become so popular. I think the new hotness will quickly become the new scrapped idea again. For the 3rd time now?
That looks so shit.....
I prefer LaRue Tactical index clips
what rail is that?