Hello Robert, I want to commend you are your very detailed instructions, and all the time you've spent helping other people who are attempting to learn to do the various electronic projects. Good work!
*** GREAT PRESENTATION*** Why did you keep the RC left throttle up instead of down? is that the reason why you end up switching the cables in M1A,M1B .. ??
Hey Perez, for my application I did not use the left throttle for anything, so it would not matter which direction I left it. I only needed 4 direction controls (forward, backward, left, and right) which the right throttle alone allowed me to do.
I have watched P6 and P7 so far. I am a beginner, but you explain things so well and your video is so clear I am going to tackle my first build, On to P( and P11. I will try to email you soon with a question or two, Thanks GREAT JOB!
good job man! I believe you can play with your remote setting or your RC receiver inputs to be able to correct the adjust the combo directions of the wheels as well.
Hi Robert! Congratulations for your contribution for us, thank you. What kind of kill switch did you use to turn the battery on and off? (To disconnect the battery). The positive of the kill switch would be connected to the positive of the battery and at the same time this wire would be connected to the positive of the two motors or how would be the installation of the kill switch? Sorry, I am beginner. Thanks in advance.
hi Robert ,you don't mention anything about putting a inline fuse for this setup ,you do have pretty high amp batteries here ,and what are the motors draw at full speed?
Hi Robert thanks for your expertise here, can this motor controller tolerate 60 amps, also loved how you demonstrated the correct and incorrect wire installation
hey that's a great video. hey i connected all the cables as you explain but the the red led it's flashing when I try to move the wheels. and it doesn't move anyway,could you please help me to finish this project. thank you
What size batteries are you using? I have two car batteries on hand and want to know if you think those would be fine or they'd put out to many amps for the sabertooth 25amp
hello im building an robot with the 2/25 speed controller you use, but i get a error (blue) light on the speed controller and i can not find out why its comming on. I did have it working right but when i went back to work on it it comes up with an error no, can you help me out..
hey the fact that you take the time to guide us through all this, just wanna say I appreciate it.
Hello I’m building a RC lawn mower myself. Thanks for the ideal this is my third one.
Hello Robert, I want to commend you are your very detailed instructions, and all the time you've spent helping other people who are attempting to learn to do the various electronic projects. Good work!
You are a creative man who wrote in Baghdad
Thanks!
*** GREAT PRESENTATION***
Why did you keep the RC left throttle up instead of down?
is that the reason why you end up switching the cables in M1A,M1B .. ??
Hey Perez, for my application I did not use the left throttle for anything, so it would not matter which direction I left it. I only needed 4 direction controls (forward, backward, left, and right) which the right throttle alone allowed me to do.
I have watched P6 and P7 so far. I am a beginner, but you explain things so well and your video is so clear I am going to tackle my first build, On to P( and P11. I will try to email you soon with a question or two, Thanks GREAT JOB!
good job man! I believe you can play with your remote setting or your RC receiver inputs to be able to correct the adjust the combo directions of the wheels as well.
Hi Robert, GREAT VIDEO ... Thank you.
Have a super-nice day and best regards from Hamburg/Germany
Great job thanks.
Hi Robert! Congratulations for your contribution for us, thank you. What kind of kill switch did you use to turn the battery on and off? (To disconnect the battery). The positive of the kill switch would be connected to the positive of the battery and at the same time this wire would be connected to the positive of the two motors or how would be the installation of the kill switch? Sorry, I am beginner. Thanks in advance.
hi Robert ,you don't mention anything about putting a inline fuse for this setup ,you do have pretty high amp batteries here ,and what are the motors draw at full speed?
Interesting and well presented, thanks from Orlando
Glad you enjoyed it!
Hi Robert thanks for your expertise here, can this motor controller tolerate 60 amps, also loved how you demonstrated the correct and incorrect wire installation
Thank You
great...could you share what is the type of ESC (motor Controller ) my friend..thank you
Hey babang. It is a Sabertooth dual 25A motor driver from Dimension Engineering.
Hello.. nice demonstration.. Where can l buy the modul cheep. Thanks
Hi, it is a great project. About the motor, what brand name do you use? 12vdc or 24vdc? How many rpm?
I do not remember the exact brand, but they were 24vdc wheelchair motors I purchased off of eBay.
Great videos, I have thoroughly enjoyed watching all of them so far!
great video
Parabéns amigo onde posso comprar esse controlador? Qual a referência obrigado
Great video!! What is the purpose of the 6th dip switch? My instructions show it in the on position.
hey that's a great video. hey i connected all the cables as you explain but the the red led it's flashing when I try to move the wheels. and it doesn't move anyway,could you please help me to finish this project. thank you
I love your screw drive dude! Parallax! and you chose to use a Spektrum radio system!!!
What size batteries are you using? I have two car batteries on hand and want to know if you think those would be fine or they'd put out to many amps for the sabertooth 25amp
Thanks for video bro
Great you do very good job Thanks
Sabertooth Dual 25A Motor Driver toi o viet nam . toi muon mua ban co ban khong? gia bao nhieu?
What wire size should be use in connecting the motors? Thanks.
Does the remote control the cutting blade of the mower?
Just whated to know... Thanks great job.
good videos man!
How do I add a kill switch to turn my gas mower off on the rc controller? I want to be able to turn the motor off remotely if something goes wrong.
Where can i buy this motor control unit?
hello im building an robot with the 2/25 speed controller you use, but i get a error (blue) light on the speed controller and i can not find out why its comming on. I did have it working right but when i went back to work on it it comes up with an error no, can you help me out..
thank
do you sell your lawnmower/ let me know??
Hey spencer. No I do not.
bye inform motor rpm?
Hello sir what name I want to buy the engine like him and thank you
Jazzy
NOW IF I WANT TO RUN A POT ON IT TO COME BACK TO CENTER I WOULD NEED A Kangaroo x2 motion controller IT THAT RIGHT