I am hooked Sandi. I'm sorry I just discovered you. I started twisting balloons in 2006. In 2013 I was stricken with Guillian Barre Syndrome which left me paralyzed from the neck down. Lots of PT and OT plus a couple of months in the hospital and rehab. My point in this is that balloon twisting again became my recovery. At the beginning I could not hold the pump because of muscle spasms. Over a period of months I gained back my strength. Now I twist balloons for my grandsons and for folks in nursing homes...for birthdays. I'm so glad to have found your channel as your cheery disposition would brighten anyone's day. Thank you for sharing your amazing talent.
Could you give some insights into what you do at the top of the pole to make the balloons stay on, instead of sliding right off? I have watched several videos and haven't found that bit of information yet. Thank you so much!
hi Sandi what is the size of the baloon stand? i am eyeing a 5'7 ft floor lamp base. will that be good enough? i am afraid that if i make this a bit shorter, it would not be as fabulous..
What is the quickest way to make castle walls? I would like to incorporate this Draw Bridge into the castle front. I am trying to plan now for a Birthday Party in July. Do you have a video on building a complete castle? Love your videos! Thank You!
I don't have a video on a complete castle, but you could combine these columns with this wall for a nice facade... ua-cam.com/video/Pt4EdwC9nvQ/v-deo.html
Those stands are made from floor lamp bases... here's a video on that... ua-cam.com/video/ya9l8V83fhw/v-deo.html and one on making your own... ua-cam.com/video/hRVvcM7Ytz4/v-deo.html :~)
Hi, I've just ordered your book, can you please tell me the height of the pole, I want to get everything before the book arrives so I'll be ready It's amazing I can't wait to do it. Thank you Dina
I either use not lamps from ikea and use 5 pole sections or I make my own bases and use EMT cut to 7'. I have a video on how to make the bases yourself on my channel. :~)
I think I am going to attempt this for my kids' birthday! But I have a couple of questions; 1. Where can I get the tall stands for the towers (and for about how much)? 2. How do you make the 'quads'? Do you just blow up the 4 ballons and tie the ends together?? TIA!
These stands were made from lamp poles~ you can get them at Ikea, target, walmart, etc. They're floor lamps with the electrical bits stripped out. Here are a couple videos that might help you... ua-cam.com/video/ya9l8V83fhw/v-deo.html and ua-cam.com/video/R_fFwVTg--g/v-deo.html . And here's a playlist that might help you ...ua-cam.com/video/R_fFwVTg--g/v-deo.html
Are you in one of my facebook groups? Beginning Balloon Professionals would be the right place to ask pricing questions, unless you're in Southern California and want me to do it for you, in which case you should give me a call and I'll answer all your questions :~)
I use an automatic sizing machine, but if you don't have that, you can make your own templates like this... ua-cam.com/video/Y6GBIA34KtA/v-deo.html :~)
Your work is so fantastek..am from egypt and really need to know how did you make balloon on your head.. I really really need to know to make it to my kids
Sandi!!!!!! I keep asking for you to teach us how to make a Japanese Pagoda shaped archway. I know I keep asking and I know you get a lot of requests. I'm going to keep asking until you either do it to shut me up, or hire a hit man to silence me. LOL
10 maybe? I use a machine so I'm not sure, but I think it was either 10 or 13 when I found myself needing to replace balloons onsite without a machine the other day ;~)
I'll add it to my list, but that's a pretty detailed sculpture, I think it would be longer than what You tube would allow ;~) Ken Stillman might have instructions on his balloonclick website though. :~)
you can either make your own like I did in this video... ua-cam.com/video/H_qwghqCUOQ/v-deo.html , or if it's indoors, you can use a floor lamp like you might get from ikea, walmart or target- like in this video... ua-cam.com/video/ya9l8V83fhw/v-deo.html
I am hooked Sandi. I'm sorry I just discovered you. I started twisting balloons in 2006. In 2013 I was stricken with Guillian Barre Syndrome which left me paralyzed from the neck down. Lots of PT and OT plus a couple of months in the hospital and rehab. My point in this is that balloon twisting again became my recovery. At the beginning I could not hold the pump because of muscle spasms. Over a period of months I gained back my strength. Now I twist balloons for my grandsons and for folks in nursing homes...for birthdays. I'm so glad to have found your channel as your cheery disposition would brighten anyone's day. Thank you for sharing your amazing talent.
I love that!! I'm so happy to be a part of your journey! :~)
Thank you so much for showing us all how to make this wonderful party entrance. It's a fantastic showpiece.
My pleasure!! Thanks for watching!!! :~)
Your videos are brilliant. And you are so much fun! Thanks for being you.
aww thank you!!! :-)
Working on a princess party right now... THIS IS PERFECT!!!!! So excited to try this design.
I can't wait to see your pix!!! :~)
Did this for an event as well but i don't know how to post pics on you tube
How wonderful Sandi thank you! An arch between the columns would also look great :)
You're right! I didn't do that only because I didn't want to have to deal with helium at the studio where we were shooting the videos ;~)
This stuff is so much harder than you make it look - thanks so much for the inspiration!
This was so adorable. Thanks for sharing
Absolutely love it. Will be doing this for my 3 year old bday!!!! Thank you
same here I'm so excited
Could you give some insights into what you do at the top of the pole to make the balloons stay on, instead of sliding right off? I have watched several videos and haven't found that bit of information yet. Thank you so much!
hi Sandi what is the size of the baloon stand? i am eyeing a 5'7 ft floor lamp base. will that be good enough? i am afraid that if i make this a bit shorter, it would not be as fabulous..
I generally use a 7' pole, but for this filming I think it's about 6' or so. :~)
I'm going to do Rapunzel birthday and this is exactly what I want to do. Thank you so much❤🎈
Awesome! I'd love to see the pix! :~)
Im' going to have this art my party. Yesssssssssss!!!!!!!! honti yess
Thank you Sandi
Yay!!!!! Don't forget to share your pix! :~)
I won't forget.
Me encanta tu canal!!! Saludos desde Colombia!
Muchisimas gracias :~)
yes! right in time for my daughter b day party im going for frozen theme thank you sandi!
One of your best - bravo!
Really, really cute!
Sandi this is awesome thank you so much.
Thank YOU! :~)
What is the quickest way to make castle walls? I would like to incorporate this Draw Bridge into the castle front. I am trying to plan now for a Birthday Party in July. Do you have a video on building a complete castle? Love your videos! Thank You!
I don't have a video on a complete castle, but you could combine these columns with this wall for a nice facade... ua-cam.com/video/Pt4EdwC9nvQ/v-deo.html
Sandi Balloon Thank You! I thought of that but wasn't sure it would work. I think I will try it.
Que padre¡ gracias por compartir tus ideas....
Gracias!
This is really nice but can u add where we can purchase some of the items example the stands for the balloons etc. Thanks
Those stands are made from floor lamp bases... here's a video on that... ua-cam.com/video/ya9l8V83fhw/v-deo.html and one on making your own... ua-cam.com/video/hRVvcM7Ytz4/v-deo.html :~)
Hi, I've just ordered your book, can you please tell me the height of the pole, I want to get everything before the book arrives so I'll be ready
It's amazing I can't wait to do it.
Thank you
Dina
I either use not lamps from ikea and use 5 pole sections or I make my own bases and use EMT cut to 7'. I have a video on how to make the bases yourself on my channel. :~)
Hey your work is awesome 😘do you have any unicorn stuff made out of ballons
I have a couple of twisted unicorns ... here you go... ua-cam.com/video/YqVXq9y6-tc/v-deo.html
Thanks😘
Thank you for sharing. ❤
Parabéns!!!Admiro muito seu trabalho...Deus a abençoe😍🙌
Wonderful, i love it! Thank you.
I think I am going to attempt this for my kids' birthday! But I have a couple of questions;
1. Where can I get the tall stands for the towers (and for about how much)?
2. How do you make the 'quads'? Do you just blow up the 4 ballons and tie the ends together??
TIA!
These stands were made from lamp poles~ you can get them at Ikea, target, walmart, etc. They're floor lamps with the electrical bits stripped out. Here are a couple videos that might help you... ua-cam.com/video/ya9l8V83fhw/v-deo.html and ua-cam.com/video/R_fFwVTg--g/v-deo.html . And here's a playlist that might help you ...ua-cam.com/video/R_fFwVTg--g/v-deo.html
Great idea! Thanks for sharing ;) Have a nice weekend.
Love it I'm gonna use for a frozen theme party
This is soooo cute i absolutely love it💘
Thanks!! :~)
Hi where do you purchase your balloons?
I recommend going to the manufacturer websites and finding the distributor closest to you. Sometimes shipping speed makes all the difference.
Love it. You are so much help to me
You are so clever xx
I would like to know how do you make a canopy with the round table in the middle
I'll add it to the list :~)
is that a 260 balloon sandi to make the chain link...how many do you need to make to form this length in the video?
It is a 260 balloon, but I'm not sure how many links there are- I'd have to try to count them in the picture. Maybe 12 or so?
Sandi Masori Balloons : How tall is the Princess column?
es hermoso !!!! me encantó .podrías escribir a cuanta pulgada están inflados los globos .gracias .saludos desde argentina .😉
8 pulgadas
10 pul. Las doradas
What balloons we use for links/chain?? Please anyone response. My kids birthday this weekend. Planning to do this decoration
Those are "260" balloons ~ the long skinny balloons that people use for hats and animals. :~)
Thank you so much Sandi!! i learned a lot from your videos.
How much would you charge for the princess column? Thanks!
Are you in one of my facebook groups? Beginning Balloon Professionals would be the right place to ask pricing questions, unless you're in Southern California and want me to do it for you, in which case you should give me a call and I'll answer all your questions :~)
Super cute!
Thanks! :~)
Awesome 👍
Thanks! :~)
@@SandiMasoriPresents Your welcome Sandy, I can't wait to make this.
so cute.. how do i make your hat?.. 😁
Here you go... ua-cam.com/video/ftdxvFlCm6k/v-deo.html :~)
It is amazing 😍
Thansk! :~)
How did you make the balloon stand
Here you go.... ua-cam.com/video/hRVvcM7Ytz4/v-deo.html :~)
How do you measure your balloons to the correct size all the time
I use an automatic sizing machine, but if you don't have that, you can make your own templates like this... ua-cam.com/video/Y6GBIA34KtA/v-deo.html :~)
I love it!
Any chance you could create a football Column/ arch for a football themed party
Sure, how's this.... ua-cam.com/video/BZT8t8eXkf8/v-deo.html , ua-cam.com/video/feeNscxFn5o/v-deo.html , ua-cam.com/video/DZT_yOu79Is/v-deo.html :~)
I love your videos! Pretty please do a flamingo!!!
Thanks! I'll add it to the list :~)
Love it!
love this
Hi i loooove this but can u do a easy strawberry shortcake column
I'll add it to my list :~)
Great thanks
beautiful
Hello. Do you have a mini mouse arch tutorial?
I don't have one, but I'll add it to the list :~)
Your work is so fantastek..am from egypt and really need to know how did you make balloon on your head.. I really really need to know to make it to my kids
ok, here you go.... ua-cam.com/video/ftdxvFlCm6k/v-deo.html :~)
Thanks soooooooooo much 😘😘
Sandi!!!!!! I keep asking for you to teach us how to make a Japanese Pagoda shaped archway. I know I keep asking and I know you get a lot of requests. I'm going to keep asking until you either do it to shut me up, or hire a hit man to silence me. LOL
LOL! It's a pretty complicated structure, so while I have it on the list, we need the time and space to shoot it.... :~)
Very nice
Thank you! :-)
Doing a prince theme babyshower using royal blue and gold will be doing this
Awesome! I can't wait to see the pix!! :~)
Where can I buy the balloons?
Check the Qualatex and Betallic websites to find their distributor lists and find the distributor colsest to you :~)
how many pumps of air do you need for 8"?
10 maybe? I use a machine so I'm not sure, but I think it was either 10 or 13 when I found myself needing to replace balloons onsite without a machine the other day ;~)
Thank you I want to try to make this for my son birthday 😃
can you do the stiletto shoe balloon?
That one is definitely on my list of videos to shoot, but I don't know when we'll get it shot or when it will come out... stay tuned!! :~)
Hi mam sandi im from philippines can you please do a tutorial about balloon carriage?? Please 😊😊😊😊
I'll add it to my list, but that's a pretty detailed sculpture, I think it would be longer than what You tube would allow ;~) Ken Stillman might have instructions on his balloonclick website though. :~)
Sandi Balloon thank you mam God bless you 😊😊😊
Awesome😀👍👍❤️❤️
Thanks! :~)
can you do a video on your Balloon storage
sure, once I get the balloon room cleaned up a bit :~)
wow thank u for sharing
Thank you for watching :~)
gracias 😃
Nice
:~)
where can I get the poles you use?
you can either make your own like I did in this video... ua-cam.com/video/H_qwghqCUOQ/v-deo.html , or if it's indoors, you can use a floor lamp like you might get from ikea, walmart or target- like in this video... ua-cam.com/video/ya9l8V83fhw/v-deo.html
Omg I love it
Thanks! :~)
Can you do a Tower Eiffel? Please 😬
I'll add it to my list :~)
Wow!
Thank you! :~)
can you please make a castle wall? Thank you so much
I'll add it to the list :~)
Can u please make a balloon castle wall
ok, I'll add it to the list :~D
+Sandi Masori Balloons. Thank you
the sound doesn't seem to work
Hmmm... I'll look into it. Maybe if you restart the computer? I'll also check the levels on the video :~)
awesome
Thanks ! :~)
Can you do one on how to make a balloon crown 👑
I'll add it to my list. Do you mean as a sculpture, an arch, a hat or a centerpiece?
Sandi Masori Balloons The one that I've seen on top of arches and entrance ways.
I love itttttttttt
Lindo, I dont speak inglish, but understand.
gracias! :-)
I like👍🏻
👍👍👍👍
can you make something SpongeBob SquarePants theme please :)
sure, I'll add that to the list :~)
+Sandi Masori Balloons thank you so much!
A Minnie Mouse arch for a 1yd
I'll add it to my list :~)
thanks you for saving me$75
Only $75? That's really cheap!! I would charge more like $465 for this! ;~)
Love it!