Thank you for the video. I had watched other videos and read other descriptions and was unable to retrieve my code but it wasn't until I followed your instructions in detail (like making sure the display goes off after you get in, the doors are closed, etc) that it worked for me. It's apparently very specific because I did it prob 7-10 times without it working but i either didn't wait for the display to go off or make sure the doors were closed. Appreciate it man
Good instructions once you got to them. You would probably have more subscribers if you got to the point faster, as others have said. Thanks for the information, it saved me a trip to the stealership.
Was banging our brain.. there were so many videos out there. I got Explorer Sport for Christmas from hubby. I had 2004 Mercury Mountaineer. The book didn’t have the factory code in the book. So since Christmas I looked at 5 videos. FINALLY FOUND YOURS. By far the best well explained in detail for women. Thank you so much.. Fantastic video. Now I’m 4’9” and just had it lowered with H&R Springs. It’s so great and getting a little bit better gas mileage. Thank you for your extremely helpful detailed video
In a mad search to find a solution to my missing door code. Your video was a god-send. I watched like 5 different UA-cam videos and none were as specific as your tutorial. Literally on the first try it work! I don't even know what you do here on YT but I'm subscribing 😂. You saved me a trip back to the dealership!
Worked great for me. Used car with no code of course. I tried this before during the day and it was warm, so I left the door open. Your tip that the doors must be closed made all the difference. Thanks so much 🙏
Thank you so much Sir!! I tried to watch many other tutorials but without success. The Ford representative didn't even mention that it was possible to do it in this way, they only ask for money 😂. Thank you for saving us the hassle and money!
Thank You! Your instruction was complete along with close all the doors and place the FOB in one orientation. Bingo... Our code appeared as you said! Thank you from a New To Me Lincoln Manual-less & Factory Code-less Owner. :)
13 minute video for 2 minutes of info... at 8 minutes he finally begins to provide us with information pertaining to the title so jump ahead to then. At 9:46 minutes you can stop watching.
Thanks so much! This is so much easier than pulling the damn fuse box. However it didn't work for me with the buttons facing in. I had to do it with them facing the opposite way than you showed in the video.
Thanks for the video. I have a 2017 Lincoln MKZ which was a little different in terms of where the keys go. They go in the cup holders to the right of the driver's seat, the rear cup holder. After that, the pressing of the start button sequence is identical. It only took me one try. As mentioned, the dealership would be delighted to do this for $75 or $100. It's not every day that you find such an easy way to save a buck.
Freaking Genius....and to think I was going to go through the hassle of pulling the fuse block down. My 2017 doesn't have the key FOB compartment you describe but does have a vertical slot on the front wall of the storage bin. Thank you for posting.
I have a 2017 Ford Explorer and this really works! I had to wait a little longer but after several tries it really worked. Dealer wanted $300 for this!
Thanks for video it was very helpful and easy to do. It saved me 90.00. The highest estimate from a ford dealer was 184.00. Ford dealers are terrible that's like stealing.
woo-hoo it worked i took me a few times but I finally got it better than taking some part under the dash out and getting a telescoping mirror to see the code THANKS much !!!!!
Sir, very helpful video. Hopefully this will be a helpful comment - on the 2018 Ford Fusion SE the actual spot for the "key" is underneath a spill pad in the drink holder, center console. Pull the pad and place each key in the outline button side down and follow the same actions...pops right up like in your video. My only correction - you don't push the ignition button a second time for the second key. The code pops up and you can listen to your tunes. I damn near broke my neck trying to get that code off the fuse box...unnecessary pain! Thanks for the help ;) Jeremy San Diego, CA
Hi fred I have the same car and located the spot for the keys. So let me get this straight. Car off I place the first key button facing down in place and hit the start button. Wait 5 seconds and power off. Place second key button facing down in place and hit the start button. Key code should pop up? Thanks for the help
First, thank you for your efforts putting this together. Second, I agree with others here, that you should either link to the part where you answer directly, or link to a diff video made for the nerds like me that may not know what you do and appreciate all the detail. Something for everyone - get you lotsa Subs & Likes, I bet... Keep cranking!
Followed this and other videos to a tee and still couldn't get it to work show the code. Is it possible that because it has the previous owners code, it will not reveal the factory code? Could weak batteries in the FOB be in question? Regardless, I pulled out the owners manual and found the factory code buried in there! Lucky lucky! Thanks for making this video though :)
My used 2016 Ford Edge came with only 1 KEY. I will purchase a new 2nd key. I will have to program it BEFORE I can use it to obtain my factory 5 digit access code....correct? Is it possible to program this 2nd key on my own? If yes, do you have a video on that process? THANKS!
I had the same issue the problem is you can only program the new one if you have the two original keys so the new is going to be the third key it is a friggin Ford scam.
On ford fissions 2017 you can find the code for entry under the steering wheel side dashboard, there is a label with the code on the side of the fuse box it’s the only fuse box there,,, you will need a mirror or phone camera to access it,, good luck 👍🏼
Just bought used, what if it has a code already? From what i gathered, as long as you have factory code, it doesn't matter what previous codes are, right? We are driving or i would have tried....
The code I am referencing is the Factory Code that was entered when the car was built. This code can never be changed. The code you are talking about is the code you can select; called the 'User Entry Code'. That code will be deleted if you enter your own code for the door entry code.
Outstanding!! My girlfriend locked her keys in the car Friday. She said key code doesn't work. I had to go to house retrieve other faub. She went out of town. Tues I'm going to correct this issue. Let u know how I do. TY
Will this work if I purchased my 2017 Ford Explorer and got one original key fob but they ordered me a spare as well. So now I have two key fobs. Does it matter if it’s not an original spare key?
Having only ONE key to my 2015 Expedition, where can I find the five-digit master code? I don't have the wallet card that should be with the manual, there is no writing in the manual and of course it requires two keys to get the sync system to reveal the five digit master code.
Search Google for the location of the RAP module. The code is printed on a label affixed to the module. You may have to get your phone angled in behind something, but you should be able to snap a pic of the code.
2015 Ford Explorer. Tried it over and over with fob faced both ways.. Not working.. Third button push turns car completely off. It’s not reacting the same to my button pushes as yours does in the video
Unfortunately, you DO need TWO keys. They must be 'Administrator' Keys, or they may be called Master Keys, by the dealer. If you don't have two Admin Keys, you will have to go to the dealer to have a Key programmed. Make sure to have them program the key as a 'Master' Key, not a MyKey.
@@JamesSmith-wu1qv no... it won't work on the day on mine... but i tweaked my back finding the code under the passengers side.... and of course...I didn't write it down! Ugh. :)
Please please please help! What if I’m doing everything correctly and the code is still not showing up at all? Just bought this vehicle and can’t seem to find that code.
When you use the first key, count EXACTLY four seconds before turning off and using other key. That is the ONLY way this will work. I tried ten times before I read the 4 second rule is the trick. This worker on my F150 (2020)
You have to have both keys because you're switching them to do this process. If you only have 1 then you will have to find the RAP module or purchase and program another fob
These keys are the biggest frigging ripoff in new cars they are a way for dealers to scam more money out of consumers. For the last 50 years I always managed to insert the key turn and start my car or truck and I could go to the local hardware or Home Depot and have a key cut for $1 or less if I needed a spare.
could've just made a code 12345 BEFORE the video for example purposes instead of blaming your "insurance company" on your laziness... this video could've been 30 seconds. 15min of my life lost.
Thank you for the video. I had watched other videos and read other descriptions and was unable to retrieve my code but it wasn't until I followed your instructions in detail (like making sure the display goes off after you get in, the doors are closed, etc) that it worked for me. It's apparently very specific because I did it prob 7-10 times without it working but i either didn't wait for the display to go off or make sure the doors were closed. Appreciate it man
same here tried so many times till i watched this video and realized i was doing it too slow and didnt wait till the screens turned off
This is all the correct info.. all the details just right
I tried many times.. but not successful.. mine was 2016 ford explorer xlt....
Good instructions once you got to them. You would probably have more subscribers if you got to the point faster, as others have said. Thanks for the information, it saved me a trip to the stealership.
OMG yes!!! I was getting frustrated! 😡
Was banging our brain.. there were so many videos out there. I got Explorer Sport for Christmas from hubby. I had 2004 Mercury Mountaineer.
The book didn’t have the factory code in the book.
So since Christmas I looked at 5 videos. FINALLY FOUND YOURS. By far the best well explained in detail for women.
Thank you so much.. Fantastic video. Now I’m 4’9” and just had it lowered with H&R Springs. It’s so great and getting a little bit better gas mileage. Thank you for your extremely helpful detailed video
In a mad search to find a solution to my missing door code. Your video was a god-send. I watched like 5 different UA-cam videos and none were as specific as your tutorial. Literally on the first try it work! I don't even know what you do here on YT but I'm subscribing 😂. You saved me a trip back to the dealership!
Worked great for me. Used car with no code of course. I tried this before during the day and it was warm, so I left the door open. Your tip that the doors must be closed made all the difference. Thanks so much 🙏
Tamiami Ford in Naples now charges $180 hourly charge to get your factory code if it is lost or misplaced. You saved me time and money !!!!!!!
Thank you for saving me $70. Your video worked like a charm and took less than 2 minutes
Thank you so much Sir!! I tried to watch many other tutorials but without success. The Ford representative didn't even mention that it was possible to do it in this way, they only ask for money 😂. Thank you for saving us the hassle and money!
I just purchased a 2017 Explorer and it had no paperwork with it, no code. This Worked Great!! Got it in 2 tries.Thank you!
Thank You! Your instruction was complete along with close all the doors and place the FOB in one orientation. Bingo... Our code appeared as you said! Thank you from a New To Me Lincoln Manual-less & Factory Code-less Owner. :)
13 minute video for 2 minutes of info... at 8 minutes he finally begins to provide us with information pertaining to the title so jump ahead to then. At 9:46 minutes you can stop watching.
thank you. there was so much rambling
Thanks so much! This is so much easier than pulling the damn fuse box. However it didn't work for me with the buttons facing in. I had to do it with them facing the opposite way than you showed in the video.
Thank you for the information! Much easier than pulling the fuse block and trying to read the back.
Thanks for the video. I have a 2017 Lincoln MKZ which was a little different in terms of where the keys go. They go in the cup holders to the right of the driver's seat, the rear cup holder. After that, the pressing of the start button sequence is identical. It only took me one try. As mentioned, the dealership would be delighted to do this for $75 or $100. It's not every day that you find such an easy way to save a buck.
Freaking Genius....and to think I was going to go through the hassle of pulling the fuse block down. My 2017 doesn't have the key FOB compartment you describe but does have a vertical slot on the front wall of the storage bin. Thank you for posting.
This is the best video for this! Thank you
So helpful! Saved me $118. Thank you a hundred and eighteen times!!!
I have a 2017 Ford Explorer and this really works! I had to wait a little longer but after several tries it really worked. Dealer wanted $300 for this!
Fine video just hate when people drag on and on, get to it already lol.
Facts!!
Excellent explanation! Exactly what I need to know…keep up the great videos! Much appreciated!!
You just made my day. THANKS!!!!
Thanks for doing it! It worked perfectly.
Thanks! Worked perfect on our new to us 2016 Explorer.
Thanks for video it was very helpful and easy to do. It saved me 90.00. The highest estimate from a ford dealer was 184.00. Ford dealers are terrible that's like stealing.
Yes! This Worked On My 2016 Ford Explorer Platinum! Thanks For The Video!
This saved me having to try to get to the fuse box and look for the sticker. Thank you for posting
Thank you sir...you're the G.O.A.T.🐐
AWESOME! It worked. Thank you
Thank you this saved me a trip to a Ford dealer and probably lots of $$$
Worked like a charm!
I appreciate you for this info
Perfect worked great, good instructions!
Thank you, this definitely worked for my explorer 2017
Thank you. Does this work for Lincolns of the same year?
Saved me 90$ thank you
woo-hoo it worked i took me a few times but I finally got it better than taking some part under the dash out and getting a telescoping mirror to see the code THANKS much !!!!!
Ayy the only video that it worked!
Sir, very helpful video. Hopefully this will be a helpful comment - on the 2018 Ford Fusion SE the actual spot for the "key" is underneath a spill pad in the drink holder, center console. Pull the pad and place each key in the outline button side down and follow the same actions...pops right up like in your video. My only correction - you don't push the ignition button a second time for the second key. The code pops up and you can listen to your tunes. I damn near broke my neck trying to get that code off the fuse box...unnecessary pain! Thanks for the help ;)
Jeremy
San Diego, CA
Hi fred
I have the same car and located the spot for the keys.
So let me get this straight.
Car off I place the first key button facing down in place and hit the start button.
Wait 5 seconds and power off.
Place second key button facing down in place and hit the start button.
Key code should pop up?
Thanks for the help
First, thank you for your efforts putting this together. Second, I agree with others here, that you should either link to the part where you answer directly, or link to a diff video made for the nerds like me that may not know what you do and appreciate all the detail. Something for everyone - get you lotsa Subs & Likes, I bet... Keep cranking!
This works! Thank you!
Thank you work fine in my 2017 explorer.
Thank you 😊 it worked
Got it 2018 ford explorer limited edition works. Thank you 😊.
thanks you saved me a phone call to the dealer ship and probably some money
Thank you!!!!!! HUGE help!!
Thanks great video
Thanks it works!
Thanks a million buddy
Thanks soo much! My husband thinks I'm genius now. 😊 LOL it works
Followed this and other videos to a tee and still couldn't get it to work show the code. Is it possible that because it has the previous owners code, it will not reveal the factory code? Could weak batteries in the FOB be in question? Regardless, I pulled out the owners manual and found the factory code buried in there! Lucky lucky! Thanks for making this video though :)
Can this work with only 1 key for or you need two?
My used 2016 Ford Edge came with only 1 KEY. I will purchase a new 2nd key. I will have to program it BEFORE I can use it to obtain my factory 5 digit access code....correct?
Is it possible to program this 2nd key on my own? If yes, do you have a video on that process? THANKS!
I had the same issue the problem is you can only program the new one if you have the two original keys so the new is going to be the third key it is a friggin Ford scam.
Very awesome thank you
On ford fissions 2017 you can find the code for entry under the steering wheel side dashboard, there is a label with the code on the side of the fuse box it’s the only fuse box there,,, you will need a mirror or phone camera to access it,, good luck 👍🏼
Thank you.
Thank you!!
Wow, that worked!
Just bought used, what if it has a code already? From what i gathered, as long as you have factory code, it doesn't matter what previous codes are, right? We are driving or i would have tried....
The code I am referencing is the Factory Code that was entered when the car was built. This code can never be changed. The code you are talking about is the code you can select; called the 'User Entry Code'. That code will be deleted if you enter your own code for the door entry code.
Outstanding!! My girlfriend locked her keys in the car Friday. She said key code doesn't work. I had to go to house retrieve other faub. She went out of town. Tues I'm going to correct this issue.
Let u know how I do. TY
Will this work if I purchased my 2017 Ford Explorer and got one original key fob but they ordered me a spare as well. So now I have two key fobs. Does it matter if it’s not an original spare key?
Did you ever try it with the key you programmed?
Do you need both sets of keys ? I only got 1 key fob. And no manual
That’s my question to,I only have one and it’s not working
My Ford Fusion 2018 Titanium does not have that key holder area on the center console. It has a USB port only. How can I do this?
Look in other areas of the console, under the cupholders, under the storage area, etc.
Perfect!!! Ty
Thank you thank you thank you!!!!!!
I tried many times and can you help me to get through.... I have 2016 Explorer XLT
Thank YOU!!!!
This does not work for a 2019 Ford Ranger..any ideas?
Thank you!!!!!
Having only ONE key to my 2015 Expedition, where can I find the five-digit master code? I don't have the wallet card that should be with the manual, there is no writing in the manual and of course it requires two keys to get the sync system to reveal the five digit master code.
Search Google for the location of the RAP module. The code is printed on a label affixed to the module. You may have to get your phone angled in behind something, but you should be able to snap a pic of the code.
2015 Ford Explorer. Tried it over and over with fob faced both ways.. Not working.. Third button push turns car completely off. It’s not reacting the same to my button pushes as yours does in the video
This video is for 2016 explorers and newer.
My 2017 Expedition requires 2 pushes of the Start/Stop button and I can’t seem to make this work. Has anyone else encountered this issue?
So since I have one key fob, (just bought the car yesterday, 2017 limited Taurus), What would I do? I’m not to smart about cars, am female lol
Read the last two sentences of the previous post above.
Nicole Verner gust take it to the dealership
Unfortunately, you DO need TWO keys. They must be 'Administrator' Keys, or they may be called Master Keys, by the dealer. If you don't have two Admin Keys, you will have to go to the dealer to have a Key programmed. Make sure to have them program the key as a 'Master' Key, not a MyKey.
Does this work with sync 3 systems?
yes i just did it i couldnt get it to work the first time but i found out its because i didnt do it fast enough
I have a ford escape 2017... I can't find the location to put the key! Can you help!?
Did you find it Gina?
@@JamesSmith-wu1qv no... it won't work on the day on mine... but i tweaked my back finding the code under the passengers side.... and of course...I didn't write it down! Ugh. :)
Very long winded... thanks for the help
Please please please help! What if I’m doing everything correctly and the code is still not showing up at all? Just bought this vehicle and can’t seem to find that code.
Same!
Actually Anjela, just got it to work. Do you still need help?
@@JamesSmith-wu1qv no thank you...I got it to work👍🏻
What if you only have one key?..
When you use the first key, count EXACTLY four seconds before turning off and using other key. That is the ONLY way this will work. I tried ten times before I read the 4 second rule is the trick. This worker on my F150 (2020)
what if you only have one key that came with the car
You have to have both keys because you're switching them to do this process. If you only have 1 then you will have to find the RAP module or purchase and program another fob
I have a 2019, push to start , I have two key fobs , ??? Will this work for me
Make sure the timing is right. Have key 1 in spot, turn on, wait 4-5 seconds, turn off. Place key 2 turn on, should display on dash
Too bad it wont work on mine, replacement master key
Urkel???
Saw another video, u needed a small dental mirror & 10mm socket to access panel by emergency brake. I said WTH??
What if I only have 1 key 😑
Each factory code is different.
Nothing happened
Three times with the fucking insurance? Three times? Twice wasnt enough?
Bi
GET TO THE DAMN POINT!!!!!!
A 3 minute clip run 13 minutes long. Thanks
Actually , 1 minute at royal ford.
GEEZ. Get to the point. Now im all crabby
These keys are the biggest frigging ripoff in new cars they are a way for dealers to scam more money out of consumers. For the last 50 years I always managed to insert the key turn and start my car or truck and I could go to the local hardware or Home Depot and have a key cut for $1 or less if I needed a spare.
You talk too much cut to the chase
Dude, you give useles info. Get to the point. Ugh annoying as heck!!
Bro seriously? You can't just be direct. I didn't even finish the video
Took way to long to explain!
could've just made a code 12345 BEFORE the video for example purposes instead of blaming your "insurance company" on your laziness... this video could've been 30 seconds. 15min of my life lost.
Worked like a charm!
Thank you.