I have watched about 20 ppf videos looking for the proper mix for solutions. This is the 1st I have seen that actually tells your mix rates. Thank you!.
I find that 5ml is the best ratio for me. You can try 2ml if you'd like and if it's not slipping enough for you, add a little more. Sometimes you just have to play around with the solutions until you find what works best for you.
Great video thanks. For the tack solution - I noticed you used 70% isopropyl alcohol. What if I used 90% isopropyl alcohol does the 8:2 ratio still work or does the alcohol need to be further dilluted?
The kit arrived yesterday and I am truly impressed with the contents as its got everything I need to install PPF on my Tacoma. $100 well spent and thanks for all. BTW, your installation videos are stellar.
Yes, it's better to remix if waiting that long. Fresh slip solution maintains a consistent mixture, ensuring a cleaner, more effective application throughout the installation process. Older solutions may become less effective as the components separate or evaporate.
@@robert_murphy916 there’s nothing wrong with using tack on headlights. We usually use it to seal the edges at the end at least. You shouldn’t need much though
Since it's been a year, no. It'll probably keep lifting. If it bothers you, you can get the panel replaced. If you got it done through an installer, see if you have a warranty that protects against this.
It can be when you want the film to stretch a bit easier and water can be used as tack. Essentially what you are doing is flushing out the soap and replacing it with water or water mixed with alcohol. That activates the adhesive and makes it “tack”.
@@tesbros thanks . I'll be doing my 1st install soon. Ive mostly heard of alcohol and water mix until It next heard of just only hot water. Would you recommend one for this 1st time diy'er? I have a tac diagram for each piece.
@@mrbrown30238 Good luck! I usually use hot water only in certain areas. For example, I use it for mirrors when I'm bulking it. Or when I'm doing a good amount of stretch on a difficult bumper. If you don't have to use it, I'd recommend using the alcohol/water mix for tack.
Hi Tesbros, what particular soap? Can i use baby shampoo? The 200 ml ISO Alcohol, is ithat a 70% or 90% isopropyl alcohol that I pour into the 800ml distilled water? Iam in Australia hardware store sell 2 kinds of ISO alcohol 70% & 90% ISO alcohol. Thanks
@@tesbros hello, what is the difference in texture of 7th gen to baby shampoo? i found baby shampoo to be oily, im not sure with 7th gen its not available in my country, is it the same as Dawn dishwash?
I have watched about 20 ppf videos looking for the proper mix for solutions. This is the 1st I have seen that actually tells your mix rates. Thank you!.
Good video I mix fresh slip daily for tint....with distilled water....
Hi, do they make precut 3m 2.0 2024 model 3 ppt? Can you also make some video to install the fender, doors, and trunks? Thanks.
Can I ask I've seen a lot of videos recommending a ratio of 2ml baby shampoo/ 1000ml of water. Can you please comment on why you use 5ml? Thanks!
I find that 5ml is the best ratio for me. You can try 2ml if you'd like and if it's not slipping enough for you, add a little more. Sometimes you just have to play around with the solutions until you find what works best for you.
Great video thanks. For the tack solution - I noticed you used 70% isopropyl alcohol. What if I used 90% isopropyl alcohol does the 8:2 ratio still work or does the alcohol need to be further dilluted?
Since it’s stronger I would further dilute it. I normally use 70
Thanks! Good video man
Can the tack solution work on Matte paint finishes without damaging the paint ?
yes
Great Video! Thank you 🔥👏💪🫶
Thank you! Just ordered the kit as it is exactly what I was looking for.
The kit arrived yesterday and I am truly impressed with the contents as its got everything I need to install PPF on my Tacoma. $100 well spent and thanks for all. BTW, your installation videos are stellar.
You straight up a downy, you can buy all these things for less than 20bucks. Theirs a fool born everyday
Do you really need to discard the solution if not using within a day? I was planning to do rockers today and the hood next week.
Yes, it's better to remix if waiting that long. Fresh slip solution maintains a consistent mixture, ensuring a cleaner, more effective application throughout the installation process. Older solutions may become less effective as the components separate or evaporate.
I have seen videos saying not to use alcohol and water on headlights just hot water. Is that true?
@@robert_murphy916 there’s nothing wrong with using tack on headlights. We usually use it to seal the edges at the end at least. You shouldn’t need much though
@@tesbrosok thanks how much soap do I add to a 32 Oz bottle and alcohol
about 5 ml of soap should be good. For tack, it's 20% alcohol and 80% water
I have an area of PPF where a few millimeters have started lifting on the edge after about a year. Would tack solution fix it?
Since it's been a year, no. It'll probably keep lifting. If it bothers you, you can get the panel replaced. If you got it done through an installer, see if you have a warranty that protects against this.
is it okay if i use Fairy for the slip solution?
shouldn't be a problem!
Is there any validity to use hot water as a tac solution?
It can be when you want the film to stretch a bit easier and water can be used as tack. Essentially what you are doing is flushing out the soap and replacing it with water or water mixed with alcohol. That activates the adhesive and makes it “tack”.
@@tesbros thanks . I'll be doing my 1st install soon. Ive mostly heard of alcohol and water mix until It next heard of just only hot water. Would you recommend one for this 1st time diy'er? I have a tac diagram for each piece.
@@mrbrown30238 Good luck! I usually use hot water only in certain areas. For example, I use it for mirrors when I'm bulking it. Or when I'm doing a good amount of stretch on a difficult bumper. If you don't have to use it, I'd recommend using the alcohol/water mix for tack.
@@tesbros is it advisable to use heatgun on the edges for easy stretching?
@@tesbros very much thx
Hi Tesbros, what particular soap? Can i use baby shampoo?
The 200 ml ISO Alcohol, is ithat a 70% or 90% isopropyl alcohol that I pour into the 800ml distilled water? Iam in Australia hardware store sell 2 kinds of ISO alcohol 70% & 90% ISO alcohol. Thanks
70% iso alcohol. I like using 7th generation dish soap or dawn dish soap, but I know some people do use baby shampoo
Can we use tack solution for installing ppf?
Yes, you use both slip and tack
where can i get those double trigger bottles?
Here you go! tesbros.com/products/spray-bottle-2-pack
excuse the noob question but what type of soap should I use for slip solution?
We usually use seventh generation dish soap
@@tesbros thank you!!
@@tesbros hello, what is the difference in texture of 7th gen to baby shampoo? i found baby shampoo to be oily, im not sure with 7th gen its not available in my country, is it the same as Dawn dishwash?
How many gallons of distilled water needed to do the whole front?
2 gallon should be enough since one bottle per panel but doesn’t hurt to have extra.
man i just mixed some dawn dish washing fluid and water. fuck all that
Tesbros Bros team
Pls pls pls start selling a matte version of the Ppf- I would like a matte look on my black Tesla Y.
We plan on it!