There are times when a guy thinks, "There isnt much that could surprise me these days." Then here comes a little video of Derek who found what crashed in Roswell all those years ago. So freaking good!
You will need to get a body shop hammer and a some blocks to repair the few dents on the body. Try it out without the body on it, it will be safer if you need to get out of it in a rush. Be safe, love your channel.
How does he do that? Terms like -- "Fuel make-her-happener!"-- are so much a part of Derrick's vocabulary that he throws them in a sentence without pauses or missing a beat in his verbal presentation. It's a gift that is so second nature it makes him very entertaining to watch.
Having cancer I'm always looking for stuff I can live vicariously through. This is one of those finds that are just so unique and cool. This has me ringing that bell.
Doug, we all hope that you're doing ok and cancer free now. If you're at forever rest, man, I hope so much that you're somewhere better and truly happy.
A guy loves when you go in depth with understanding how things work on an old engine. How to read spark plugs and how the entire ignition system works. It is super educational and at the same time super fun to watch your videos. A guy is running out of videos from you. I've seen them all. But a guy can always see them again. Because a guy learn something new every time
there's so much information that you cant put a price on in every one of his videos, things you cant outright search for on youtube, because theyre thrown into his videos as he does the things he talks about. i love it
Easiest way for a rough guess capacity in a ford, pull a spark plug and use a piece of wire down the hole to measure the stroke, 2.870= 221/260/289 (unless it has a 5 bolt bellhousing you can guarantee its a 289, only 65 and earlier ran the 5 bolt bellhousing and no 221/260's had the 6 bolt bellhousing) 3.00= 302, 3.5=351
You can also quickly tell the difference between a 289/302 and a 351W by measuring the width of the intake. The 8.2" deck 289/302 is about 8" wide, while the taller 9.5" deck 351W will have a roughly 11" wide intake manifold. Also, on a 289/302, the pad for the distributor is almost level with the China rail, while it's about an inch down on a 351 because of the taller deck. Both have the thermostat housing in the intake manifold, which is an easy way to tell the difference between a Windsor and a 335-series Cleveland, which has it in the block.
My dad had one of four gas stations near a highway exit. The one directly across was up against a cemetery. I saw one guy eat a face full while checking a customer radiator. Before anyone got to him, he had run into and back out of that cemetery. He was fine, but that was a creepy few seconds.
This dude would make a GREAT automotive teacher for high schoolers or community college. He makes the complicated simple. Does it in a calming way that’s fun!!! Keep on keeping on Professor Vise grip
Had a auto tech instructor very much like him in votec, we built 3 rat rods over 2 years, I learned so much in those two years because that man made it fun to learn, now at 19 I’m an engine/ transmission rebuilder at a dealership!
I bet Mr. Johnson is watching from the great beyond with a smile from ear to ear knowing his neglected creation is now in very capable hands. Can’t wait to see it in action. Nice find Derek.
Thank you for not swearing in your episodes. I love that I can feel confident sharing your channel with young people, I really enjoy your projects and have learned many things from you.
I just want to also thank him for this. I worked in a shop for years, and I've never seen a mechanic that can do his job without gratuitous swearing. I am not one of them.
When a guy first hooked his peepers on the ol thumbnail he got as confused as a fart in a fan factory as to what contraption a feller had gotten ahold of this time, but I gotta say that thing is neater than a twice ironed shirt! Seriously your doing an awesome job and this is definitely my favorite channel keep on keepin on!
Derek I don't comment much on your videos but I enjoy them all. The wholesomeness with your interactions with friends and family, the Patriotic theme throughout, and the humor barely hiding your obvious experience and intelligence, this is my favorite show. And I listen to a lot, 47 year old trucker in Indiana. This shade tree mechanic knowledge is invaluable when working with older units. Although you're probably about my age this the type of knowledge I wish I would have learned from my dad, instead of having to figure it all out myself. I appreciate you man, keep doing what you're doing! 👍👍
You are the 1st person on UA-cam that I've heard ever mention a dwell meter. I thought I was the only person that still has 1 in my tool chest. You put out a great video on how too check most older ignition systems. Great job
As a Journeyman Motorcycle Mechanic since 1986 and a Ford guy, I cannot wait for your next post. Your description on how the electrical and mechanical systems work is great. Have a fantastic day from Alberta
Love you addressed the reading of the plugs. I always try to look them over good. Ive heard instructors say it’s not worth learning, i agree with you 100%
I raced Arctic Cats in the same time period. I was an independent but I knew Carmen to talk to in the pits. He was quite a guy. There was nothing about snowmobiles and especially fast snowmobiles he did not know. That was not the only V8 powered dual track sled by a long shot, there were many that would run on Lake George for record runs. I never saw that one on the lake though. I also notice there are no studs in the tracks so I can be pretty sure it was still in development.
I really appreciated the talk about plugs and reading them. As a 2-cycle fan, I can tell you it's important! This was some really useful and pertinent info for everyone.
302 engines were introduced in 1968 as the replacement for the 289's. There is also a FMX automatic that has the vacuum modulator on the right side but has an aluminum bellhousing & cast iron case. The C-6 also has a single piece bellhousing /body.
I really appreciate your heartfelt interest and sincerity about the history of the vehicles you work on. It's great to remember the people that put their heart and soul into a project. Memorializing them is wonderful and makes me know you're a good guy.
Other than your absolute rediculas humor which I love.The best part of your videos is when you bring your family along and the way you always honor the history of these machines and the vets.Keep up the good work
I'll be dipped!!! I went through 62 years of my life not knowing much about internal combustion engine, nor I cared. Then I found this fella. about a month or so ago. Now i sit and watch everything you post on UA-cam. The phrases and demeanor of the guy gets me cracking all the time. Just a reminder: Don't ever try to throw a rock at Cananada again. :)))))))))))
New to the channel and I thought was a brilliant funny channel. After watching this I also realised what a fantastic mechanic you are and you’re explanation of spark plugs was brilliant.
love these garage built one offs. Takes me back about 50 years when I had access to a welding rig, a junk yard, and my uncles cast off 63 Falcon Sprint....😎👍👍
The chain setup off the tailshaft is made of the 2 drive chains from the 72 panthers..... AMAZING! I recovnize them from the 4 or 5 panthers of that era i have owned in the past few years, unmistakable.
Wow! What a trip down memory lane for me. My brothers raced Cats in the late 60's - early 70's. I remember when Cat brought out the custom "Boss Cat's" for attempts at speed records. They succeeded in setting a few records but the records didn't stand very long as technology allowed more traditional styled sleds with bigger/better snowmobile engines to break the "Boss Cat's" speed records. If I remember correctly a 800 cc Hirth powered King Cat was almost as fast directly from the factory. Great video.
Thank you for going in depth on the edu-ma-cation! I don't do a lot of wrenching but it's really good to learn that stuff, especially how to read a sparkalator.
I learned to read spark plugs years ago. But you are right people don't seem to know how to do any of these things anymore. I really enjoy your content, keep it up.
I'm not really interested in snowmobiles but I'm addicted to this channel. So I'm watching. Had to hit the like button during the spark plug lesson. Great content!
Love it how you make working on old engines as enjoyable to watch as it is to actually tinkering on them myself. spraying the oiled up motion lotion to bring some fire down... loving em!
Hey Derek, the actual term is "Pin the ears down". Ever drive a Model T with the original drive train. The 'ears' were the throttle (right side lever) and the spark advance (left side levet). These levers were on each side of the steering column. I figure you have driven a T but thought I might confuse others on the Model T controls.
oddly enough, those few songs he released have been covered by many others, multiple times and did better. even though none topped the charts, many people still liked it ;) more or less the whole RIAA and most listeners are just clowns
Nick W., same response here! Who doesn't remember thinking, "what is Garth smoking these days?" Shania came up with a much better plan to break into mainstream pop. Poor Garth. He was like Betamax, while Shania was VHS.
The stuff you drag to the shop always amazes me. You have some of the best content and are always amusing and enjoyable to watch. Thanks for sharing your adventures. Peace
2 yrs too late.... but I remember that pactular sled. I'm an Artic Cat (El Tigre was my cat of choice) guy. I remember reading about this machine back in the 70s. Too cool!
Informative Derek! Always learn something new! Thank you for explaining in layman terms! And I have Fords.....! Looking forward to the next video on this! Interesting snow mobile! Sad the owner isn't around...would be fun to pick his brain about this!
I grew up in Wyoming and they had a wild west winter carnival and there was tons of machine like that even budweiser had one. They drag raced them. Brings back great memories
50:21 Oh my goodness!! The 2bbl Autolite STILL has the the tag so that if a guy needs to get a carb kit it will not be too hard! I really enjoyed your explanation of the sparkalators. You are quite brilliant. Best to all. :)
That's just what I was going to say. The shifter looks like a mustang for sure and little I know......I never seen a 302 with a automatic. Had a 68 stock 302 but it was a manual. They may have done it but every mustang I was around when I was young and dumb all the 302's were manuals.
@asteinmann Those castings only refer to the first year of use. That manifold could have been used on a later year 302. If I remember correctly, you could option for either a 289 or 302 in 67 and maybe 68. There were some full size cars that only had a 289.
Born in 66 that's old crazy ideas speed !! That video was awesome!! OLD stuff will live on !! Thank you for taking the time to get her running vroom vroom!! I'm sure you will!! STAY SAFE OUT THERE BROTHER !! And get her fired up on 8 cylinder!! OLD school!! That was awsome!!
Love your show and your Ave like vocabulisims. One point of erection though. The primary on a coil is the low voly side. The secondary is the sparky side. 1.6 oooms is very good on the primary. You want the ration betwixt the secondary and primary to be hi. The hi'r the ratio, the more pixies you'll have.
I'm 27 and read plugs for detonation, and timing. I would like to learn more and appreciate the small tidbits you drop in your videos. Wish a guy had a fella like you around when I was a youngin. Self taught here with the help of the interwebs
How much is there to know if you're familiar with any other brand of 4-stroke gasoline engine ever built for any purpose whatsoever? They all work the same way.
Unless it's a four stroke Diesel. Because it's possible to run one off gasoline. Or pretty much any other combustable liquid. Run time variable. Also you can fit spark plugs. Making it depend less on compression, and more on ignition.
@@devilsoffspring5519 Really, and My Father was a Parts Mgr for GM for 45 Years, the One thing that I caught Hell for was "ATS"....All the Same, you've got lots to LEARN!!!
Well, if the intake is original to the block, it is can only be a 260 or 289. 302, while in the same engine family, was introduced in '68 model cars. :) Love the channel, Derek. One of my new favorites!
No joke. No way to really stop it and the motor is protected in a forward collision by the driver. Wonder if a feller could hook up an air bag as an ejection seat?
Look on the Block below the exhaust manifold. That's a favorite spot for the casting numbers. ALSO the numbers aren't always in the same place because they used so many different foundries for their blocks. They didn't have dedicated foundries for each block until the early 70's.
There are times when a guy thinks, "There isnt much that could surprise me these days." Then here comes a little video of Derek who found what crashed in Roswell all those years ago. So freaking good!
And Derek will try to get it running after all those years!
Exactly what I was thinking!
A guy really couldn't agree any more than this guy does. Alien-horse power.
You will need to get a body shop hammer and a some blocks to repair the few dents on the body. Try it out without the body on it, it will be safer if you need to get out of it in a rush. Be safe, love your channel.
It's a snow lam bor geenee.... make that a snow GT40
should’ve drove it 600 miles home. a million views right there.
(TO MAKE IT CLEAR, those are my favorite kinds of videos from him!)
🤣
@Andrew Brickhill not to me
Why not get it running and drive it 600 miles AWAY from home?
@@aspalovin i like knowing that it’s his when he drives it home
@@aspalovin that would make it a 2 part vid. Because total milage would be 1200 Miles. This includes the return trip.
Yes! I'd call her "Middle Finger" and revive that red, white, and blue paint scheme. She fits good alongside the Independence Chevelle.
I vote the American Antler cause we all know what it really looks like
@@hankbardukis381 No Step On One-Eyed Snek
How does he do that? Terms like -- "Fuel make-her-happener!"-- are so much a part of Derrick's vocabulary that he throws them in a sentence without pauses or missing a beat in his verbal presentation. It's a gift that is so second nature it makes him very entertaining to watch.
Having cancer I'm always looking for stuff I can live vicariously through. This is one of those finds that are just so unique and cool. This has me ringing that bell.
Doug I hope you are doing well. God bless
Doug hope your doing well
Doug, we all hope that you're doing ok and cancer free now.
If you're at forever rest, man, I hope so much that you're somewhere better and truly happy.
F**K Cancer. Live well, Doug!
Doug , fuck cancer, how real is god feeling to you now , ive always said DOG bless🤷🏽♂️
A guy loves when you go in depth with understanding how things work on an old engine. How to read spark plugs and how the entire ignition system works.
It is super educational and at the same time super fun to watch your videos.
A guy is running out of videos from you. I've seen them all.
But a guy can always see them again. Because a guy learn something new every time
there's so much information that you cant put a price on in every one of his videos, things you cant outright search for on youtube, because theyre thrown into his videos as he does the things he talks about.
i love it
just say "i"...why are you talking in pseudo 3rd person like a maxi-schizophrenic person?
@@Shadow0fd3ath24 its a long running gag on this channel
@@njovwevnjweV true :-)
Batman called and wants to know when you'll be done fixin on his snowmobile . ;)
😂😂😂
HAHAHAHAHAAAAAAA OMG HAHAHA THATS SOOOOOOOOOOOOOOOO FREAKIN FUNNY! HA! -_-
Batman called and said that's a Robin nest not a mouse nest!
HAHAHAHAHAHAHA/!
That’s a beauty 😂😂😂
Easiest way for a rough guess capacity in a ford, pull a spark plug and use a piece of wire down the hole to measure the stroke, 2.870= 221/260/289 (unless it has a 5 bolt bellhousing you can guarantee its a 289, only 65 and earlier ran the 5 bolt bellhousing and no 221/260's had the 6 bolt bellhousing) 3.00= 302, 3.5=351
You can also quickly tell the difference between a 289/302 and a 351W by measuring the width of the intake. The 8.2" deck 289/302 is about 8" wide, while the taller 9.5" deck 351W will have a roughly 11" wide intake manifold. Also, on a 289/302, the pad for the distributor is almost level with the China rail, while it's about an inch down on a 351 because of the taller deck. Both have the thermostat housing in the intake manifold, which is an easy way to tell the difference between a Windsor and a 335-series Cleveland, which has it in the block.
That radiator hose blows out you're going to know what hell feels like.
Nothing like a nice warm coolant shower
Duct tape will ensure that never happens
My dad had one of four gas stations near a highway exit. The one directly across was up against a cemetery. I saw one guy eat a face full while checking a customer radiator. Before anyone got to him, he had run into and back out of that cemetery. He was fine, but that was a creepy few seconds.
Excellent
That sweet sweet slippery hot stuff is wonderful for deep exfoliating
This dude would make a GREAT automotive teacher for high schoolers or community college. He makes the complicated simple. Does it in a calming way that’s fun!!! Keep on keeping on Professor Vise grip
I agree with you 💯 my friend
@@benjaminbrown109 everything is good
Had a auto tech instructor very much like him in votec, we built 3 rat rods over 2 years, I learned so much in those two years because that man made it fun to learn, now at 19 I’m an engine/ transmission rebuilder at a dealership!
@@kaelbryant7660 stealerships are the worst!
I agree with that.
I bet Mr. Johnson is watching from the great beyond with a smile from ear to ear knowing his neglected creation is now in very capable hands. Can’t wait to see it in action. Nice find Derek.
“I don’t think he ran this much, at all”. Even the dude who built it was terrified of that thing!
Probably only 1/4mile at a time max. The issue I can see would be hooking the power
to the snow, Otherwise I'd suggest efi and a 200shot of NOS!
Thank you for not swearing in your episodes. I love that I can feel confident sharing your channel with young people, I really enjoy your projects and have learned many things from you.
hell man,,how do you expect young people to grow up if they dont swear. ??..damn it..
I just want to also thank him for this. I worked in a shop for years, and I've never seen a mechanic that can do his job without gratuitous swearing. I am not one of them.
When a guy first hooked his peepers on the ol thumbnail he got as confused as a fart in a fan factory as to what contraption a feller had gotten ahold of this time, but I gotta say that thing is neater than a twice ironed shirt! Seriously your doing an awesome job and this is definitely my favorite channel keep on keepin on!
I’m borrowing “confused as a fart in a fan factory”😂
VGG has the the best subscribers/comments ever.
@@528Circle 😂😂agreed sir
Funniest comment ever lmao
Oh for sure brother.
Well I'll be dipped. I'm almost 65 years old, and that was the BEST shop class I EVER attended. Moses' sandals....
Thanks Douglas!
@@ViceGripGarage I'm almost 72 years old. I'm with Douglas.
@@billstephens6557 is this THE mecum auctions bill stephens?
I would pay to see it ride on the snow that thing is awesome
That's a snow lam bor geenee.. make that a GT40
You should get a Vice Grip Garage museum where we can go and see you projects
Someday
Word!
@@ViceGripGarage a guy can be a caretaker if needed. 💯😉
I would pay to go to a Vice Grip Garage Museum. A feller would see things that bottle the mind.....
@@dukeofearl6256 boggle
Derek I don't comment much on your videos but I enjoy them all. The wholesomeness with your interactions with friends and family, the Patriotic theme throughout, and the humor barely hiding your obvious experience and intelligence, this is my favorite show. And I listen to a lot, 47 year old trucker in Indiana. This shade tree mechanic knowledge is invaluable when working with older units. Although you're probably about my age this the type of knowledge I wish I would have learned from my dad, instead of having to figure it all out myself. I appreciate you man, keep doing what you're doing! 👍👍
This the only guy that can give Ave a run for his money in the vocabularyisms department
They may be cousins...we need a crossover episode fir sure one day
More Rickyisms than Trailer Park Boys.
Ave......many peoples favorite dude on UA-cam !!!!!!!!!!
Its got more holes in it that bonny and clyde .
No way. @1puglife is the king.
You hit the nail on the head by covering reading plugs and points! I'm going on 40 and that's how I was raised!
“ I’m gonna do the right thing and pretend I didn’t see that.” This needs to be on a t-shirt!
Id buy it😂
shut up an take my money!
Or a monument in Washington,DC
I totally agree.. I’d buy it
A little mystery down the carb .
You are the 1st person on UA-cam that I've heard ever mention a dwell meter. I thought I was the only person that still has 1 in my tool chest. You put out a great video on how too check most older ignition systems. Great job
I have a home theater and when that engine got running it sounded awesome i can't wait to see more of this thing
You"re the man. Finally got Lightning and thunder. Great video.
Thanks
That passionate pool of patriotism at 28:56 is something sorely rare in the world today.... bravo sir.
As a Journeyman Motorcycle Mechanic since 1986 and a Ford guy, I cannot wait for your next post. Your description on how the electrical and mechanical systems work is great. Have a fantastic day from Alberta
Love you addressed the reading of the plugs. I always try to look them over good. Ive heard instructors say it’s not worth learning, i agree with you 100%
I raced Arctic Cats in the same time period. I was an independent but I knew Carmen to talk to in the pits. He was quite a guy. There was nothing about snowmobiles and especially fast snowmobiles he did not know. That was not the only V8 powered dual track sled by a long shot, there were many that would run on Lake George for record runs. I never saw that one on the lake though. I also notice there are no studs in the tracks so I can be pretty sure it was still in development.
I really appreciated the talk about plugs and reading them. As a 2-cycle fan, I can tell you it's important! This was some really useful and pertinent info for everyone.
302 engines were introduced in 1968 as the replacement for the 289's. There is also a FMX automatic that has the vacuum modulator on the right side but has an aluminum bellhousing & cast iron case. The C-6 also has a single piece bellhousing /body.
I really appreciate your heartfelt interest and sincerity about the history of the vehicles you work on. It's great to remember the people that put their heart and soul into a project. Memorializing them is wonderful and makes me know you're a good guy.
Thanks
Best explanation of how an ignition coil works, particularly in how it interacts with the distributor that I have seen.
Well I just can’t believe it.. I guess I have to because I’m looking right at it!
This was read in Derek's voice lol
Other than your absolute rediculas humor which I love.The best part of your videos is when you bring your family along and the way you always honor the history of these machines and the vets.Keep up the good work
“If were gonna have a failure itll be somewhere around here” *points at entire drivetrain* lmao
Best there is on utube.
thank you
My favorite RIGHT NOW as well.
A guy does a great great job
I dont know where a guy finds these things, but I'm glad out of all the people in the world, you found it!
When are we going to see it on the snow?
most people would think its scrap but not us
Truth!
WOWWW🤣
I'll be dipped!!! I went through 62 years of my life not knowing much about internal combustion engine, nor I cared. Then I found this fella. about a month or so ago. Now i sit and watch everything you post on UA-cam. The phrases and demeanor of the guy gets me cracking all the time. Just a reminder: Don't ever try to throw a rock at Cananada again. :)))))))))))
New to the channel and I thought was a brilliant funny channel. After watching this I also realised what a fantastic mechanic you are and you’re explanation of spark plugs was brilliant.
When it comes to small block ford's most after market RV or performance cams use the 351Windsor fireing order
Man VGG consistently has such a great comment section, it’s like I’m not even on UA-cam anymore.
Just a bunch of like minded folks bud... isn’t a guy in this comment section I wouldn’t buy a cold snack
@@countryboy44555 I’ll be dipped! What time shall we meet up, friend?
@@528Circle whenever the damn bars open back up again!
@@countryboy44555 excellent point! Until then, I will join you in a remote cold
Snack!
So true! I haven’t really thought about it before but you’re right. The VGG comment section is very wholesome!
That's awesome man a guy might think he was looking at the batman snowmobile sweeeeet video 👍👍
My thoughts exactly
Should call it the "ARCTIC BAT"🤙
@@coryernewein man thats an awesome name for the sled ha ha 👍
@BKNY FINEST ha ha have some cold snacks 🍺
The show is more therapeutic then listening and paying my therapist. THANK YOU.
Note:There is just a wee space to make Therapist into The Rapist.
Derek messaging seller on craigslist: What the hell is it? You dont know? Ill take it!
love these garage built one offs. Takes me back about 50 years when I had access to a welding rig, a junk yard, and my uncles cast off 63 Falcon Sprint....😎👍👍
The chain setup off the tailshaft is made of the 2 drive chains from the 72 panthers..... AMAZING! I recovnize them from the 4 or 5 panthers of that era i have owned in the past few years, unmistakable.
Wow! What a trip down memory lane for me. My brothers raced Cats in the late 60's - early 70's. I remember when Cat brought out the custom "Boss Cat's" for attempts at speed records. They succeeded in setting a few records but the records didn't stand very long as technology allowed more traditional styled sleds with bigger/better snowmobile engines to break the "Boss Cat's" speed records. If I remember correctly a 800 cc Hirth powered King Cat was almost as fast directly from the factory. Great video.
Its good to see "Red Green" back in good humor. Just love what you have to offer, KEEP IT UP!!!
Thank you Roger
Have you seen Mighty Mouses boat anywhere? The little prick must be hiding...
Exactly what I think every time I watch a video. We sure Derek is really his name. Maybe. Yeah. Nope.
After the whole burn injury at Cleeter's event, should consider the location of some of that cooling system.
I was going to say the same thing.
@@RearEngineShop safety first
@@hotmiramichi or 2nd lol.........
Yup
My thoughts as well!
Thank you for going in depth on the edu-ma-cation! I don't do a lot of wrenching but it's really good to learn that stuff, especially how to read a sparkalator.
I learned to read spark plugs years ago. But you are right people don't seem to know how to do any of these things anymore. I really enjoy your content, keep it up.
"Lower than Chris Gains album sales" I spit my coffee out on that one.
funny!
I'm not really interested in snowmobiles but I'm addicted to this channel. So I'm watching. Had to hit the like button during the spark plug lesson. Great content!
So cool! My favourite part is your respect for the mans hard work!
Derek and VGG is hands down UA-cam's Greatest automotive channel ever!!!
Love it how you make working on old engines as enjoyable to watch as it is to actually tinkering on them myself. spraying the oiled up motion lotion to bring some fire down... loving em!
Hey Derek, the actual term is "Pin the ears down". Ever drive a Model T with the original drive train. The 'ears' were the throttle (right side lever) and the spark advance (left side levet). These levers were on each side of the steering column.
I figure you have driven a T but thought I might confuse others on the Model T controls.
"Keeping the cost down lower than Chris Gaines album sales" got a snort laugh outta me... what was the guy thinking!
oddly enough, those few songs he released have been covered by many others, multiple times and did better. even though none topped the charts, many people still liked it ;)
more or less the whole RIAA and most listeners are just clowns
@@throttlebottle5906 how many bought the album just because it was Garth though?
Nick W., same response here! Who doesn't remember thinking, "what is Garth smoking these days?" Shania came up with a much better plan to break into mainstream pop. Poor Garth. He was like Betamax, while Shania was VHS.
Best, easiest and simplest explanation of the electrical circuit I have heard. 👍🏼
looks like this thing coming straight out of the Mad Max alternate snow apocalypse
Fun fact: it's 2021.. time to get your mad max rigs ready
snowpocalypse......get it right
I would DEFINITELY watch that movie!
When I saw that first puff of smoke, even before it fired, boy did I get excited... wow!
Ironic really, #2 was the first to show signs of life yet it settled down to a steady miss once the other 7 woke up :/
The stuff you drag to the shop always amazes me. You have some of the best content and are always amusing and enjoyable to watch. Thanks for sharing your adventures. Peace
Thank you Dave
Honestly, one of my favorite new (to me) channels on YT. Derek's delivery and content is so engaging. Keep 'em comin'!
He has a tv show to on the motor trend ch called roadworthy rescue
I just love the sound of an unfettered V8. What a beast. Great vid.
“Nope, maybe, probably not!”
T-shirt that !!!
A guy definitely needs tshirts with Derek-isms
"Didn't see that"
Very cool. I can't believe that was a whole hour.
Time flies when yer havin fun.
2 yrs too late.... but I remember that pactular sled. I'm an Artic Cat (El Tigre was my cat of choice) guy.
I remember reading about this machine back in the 70s.
Too cool!
"Just got done putting the negative cable on, why are you always so sad". That was classic 😂
I know, the inflection he put on *negative* was so frickin hilarious hahahaha
I didn't get the joke the first time I watched. But after watching again today I had quite a long laugh.
@@Joseph-C )o
Sand rail + snowmobile + drag boat V-drive + a touch of Mad Max = this absolute unit.
Informative Derek! Always learn something new! Thank you for explaining in layman terms! And I have Fords.....! Looking forward to the next video on this! Interesting snow mobile! Sad the owner isn't around...would be fun to pick his brain about this!
I grew up in Wyoming and they had a wild west winter carnival and there was tons of machine like that even budweiser had one. They drag raced them. Brings back great memories
Cool
50:21 Oh my goodness!! The 2bbl Autolite STILL has the the tag so that if a guy needs to get a carb kit it will not be too hard! I really enjoyed your explanation of the sparkalators. You are quite brilliant. Best to all. :)
I'm so damn excited to see this drive!!!! On the third episode I say we just go on ahead and throw a supercharger on it simply for more smiles
Pull it off the corvette, a guy thinks it will fit fine.
I like your way of thinking
Anybody else yell “America “when that thing started , that thing is so cool
Just you Doug just you. It is cool thou.
Excellent quick tutorial on spark plug heat range, the effects of mistakes, and the ways to determine the correct plug.
A guy was thinking, I would love to see a Derek's Museum of Motorized Mayhem and seeing unique builds and saved on rigs.
Cylinder 2 is just having a cold snack
I would put my money on the motor being a 289 out of an early model Mustang. The shifter makes me think that.
That's just what I was going to say. The shifter looks like a mustang for sure and little I know......I never seen a 302 with a automatic. Had a 68 stock 302 but it was a manual. They may have done it but every mustang I was around when I was young and dumb all the 302's were manuals.
@asteinmann Those castings only refer to the first year of use. That manifold could have been used on a later year 302. If I remember correctly, you could option for either a 289 or 302 in 67 and maybe 68. There were some full size cars that only had a 289.
exactly what caught my eye too!
@@oldfarmer4700 It was from a Fairlane or Torino he said.
Born in 66 that's old crazy ideas speed !! That video was awesome!! OLD stuff will live on !! Thank you for taking the time to get her running vroom vroom!! I'm sure you will!! STAY SAFE OUT THERE BROTHER !! And get her fired up on 8 cylinder!! OLD school!! That was awsome!!
Derek! Please be careful with that radiator sitting behind you!
Sure will
I love that the videos are getting longer it gives a guy more to watch
Man the 70’s were wild, radiator, fuel tank and battery surrounding the cockpit...great video Derek
Love your show and your Ave like vocabulisims. One point of erection though. The primary on a coil is the low voly side. The secondary is the sparky side. 1.6 oooms is very good on the primary. You want the ration betwixt the secondary and primary to be hi. The hi'r the ratio, the more pixies you'll have.
This was awesome, glad you care enough about the history to buy and document this
Me with any other creator: *skips over sponsorship
Me with Derek: *watches the whole sponsorship because he somehow makes it enjoyable to watch*
It's truly amazing how Derek can identify an engine the same way a CSI agent can identify a body.
Tucker Carlson tonight
When you noticed the loose u-joint underneath it seems you missed seeing that it was sitting on the battery tray.
One man I can watch for hours and not hesitate to skip not one bit
Vice grip and cleetus uploading 4 minutes apart, I’ve got EN TER TAINMENT
Yep,, life's good on a Friday afternoon [PST] isn't it,, REEEEL GUUD! :)
Its to wait til this evening thats the hard part cause all i wanna do is grab a cold snack and start my weekend of the right way
@@iDAV8 Whys that?
this thing is really cool. i imagine it is a beast on the snow as well. impressed by the time and fabrication that was put into it.
I'm 27 and read plugs for detonation, and timing. I would like to learn more and appreciate the small tidbits you drop in your videos. Wish a guy had a fella like you around when I was a youngin. Self taught here with the help of the interwebs
I love this contraption ! What a marvel of engineering ! Can't wait to see her throwing rooster tails out in the white stuff !
VGG: "I don't know much about Ford engines."
Also VGG: "Let me drop some Ford knowledge on you for every aspect of every Ford engine ever created."
How much is there to know if you're familiar with any other brand of 4-stroke gasoline engine ever built for any purpose whatsoever? They all work the same way.
Unless it's a four stroke Diesel. Because it's possible to run one off gasoline. Or pretty much any other combustable liquid. Run time variable. Also you can fit spark plugs. Making it depend less on compression, and more on ignition.
@@devilsoffspring5519 Really, and My Father was a Parts Mgr for GM for 45 Years, the One thing that I caught Hell for was "ATS"....All the Same, you've got lots to LEARN!!!
@@devilsoffspring5519 yeah exactly.. I'm putting a rotor in my Cleveland
@@dacarvoid45 yeah nah
This is an amazing piece of history. Love what you do just keep it coming.
Well, if the intake is original to the block, it is can only be a 260 or 289. 302, while in the same engine family, was introduced in '68 model cars. :) Love the channel, Derek. One of my new favorites!
Just imagine how the creator of this is looking from far above and just thinking: "yeah my rig is in good hands"
Felt same way
@@keithyoung7640 So true if you think about it! Like an unfinished piece of art in the hands of a modern day Picasso!lol
Holy hell, that’s the most dangerous thing i have ever seen in my entire life😂😂😂😂💪🏻💪🏻
No joke. No way to really stop it and the motor is protected in a forward collision by the driver. Wonder if a feller could hook up an air bag as an ejection seat?
But I want it. Or want to build something like it.
...and it is glorious, is it not? ‘MERICA!
It looks and sounds like a machine the Devil himself would drive.
You remind me of Red Green except you actually know how to fix things.
He has dialed it back a little sence he began all this great content..
Exactly.
I like how a guy sitting in this thing is surrounded by sharp sheet metal, it really keeps a fellow on his guard !
and 9thousand 6hundred gazillion RIBBITS!!! rivits... ;) ets, rivets? wutever yea that one... I LIKE *RIBBITS* BETTER tho!!! :) yea...... ummmmmm yea....
Did I miss the part where you explained how you even came across this thing, or is that top secret? A guy loves to hear stories of discovery......
Looks "almost" like a Snowmobile that the MUNSTERS would own!
NAILED IT!! 🤣😂🤘😏
Ford 289
Lol thats so true.
if the Munsters and the Clampetts colabbed on a project this would be the result.
Munster should now be the name of this monster! Like it up so Derek can see!
Straight out of the Mad Max Movie! 🇦🇺
Look on the Block below the exhaust manifold. That's a favorite spot for the casting numbers. ALSO the numbers aren't always in the same place because they used so many different foundries for their blocks. They didn't have dedicated foundries for each block until the early 70's.