Worked on mine 2004 1.8 manual vectra C lowest trim level. Sourced out two from a 2006- diesel 1.9 and 2.0. Struggled a bit first but it worked successfully. One switch did not work but the other did. Since it`s canbus and each switch is probly coded, I got lucky I think. Video showed everything that needed to be added or changed. I used a copy of Op-com to activate cruise.
this was very video helpful 1.5mm allen key does the job I took the plastic cover off once it was off my car and sprayed the hell out of it with electrical cleaner and used a clean cloth to remove the muck it worked after that.
Does the job look the same for fitting/activating traction control? Buy a traction control button, remove blank plate from dashboard where other button would be, plug new button in, plug in Op-Com, activate TCM...?
People still can`t understand that the connection wire for the clutch is built into the harness. Mine is a 2004 comfort (lowest trim level) and it still has it. It was xipped to wire loom a cm over clutch pedal.
Just did this programming on my other 2005 2.2 DIR automatic. This has a info display (TID or GID etc) and higher trim level. Op-com says it was a 2004 model while selecting a 2005 model only worked. Struggled a lot with this since there was about 20 error codes on EGR, CIM and instrument panel section. Not sure if they are even related. Doing the test sequence failed on cruise control buttons. Altho I can confirm it works, tested it while driving. Also show a green indicator light in dashboard. No need for clutch switch.
Hello, Opel Astra G 2000 model Engine model = X16XEL Is it necessary to install a clutch switch after installing the cruise control lever? ( Merhaba , Opel Atra G 2000 model Motor modeli= X 16XEL Hız sabitleyici kolunu taktıktan sonra debriyaj müşürü de takmak gerekli mi? )
You just need to buy the Cruise Control Stalk £15. You don't need the clutch control pedal. Mine is automatic so I know this. After that you need to buy on ebay the Op-com CD sofware with the USB interface £15. and follow this video instruction. Is very easy. Just 10 minutes
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Worked on mine 2004 1.8 manual vectra C lowest trim level. Sourced out two from a 2006- diesel 1.9 and 2.0. Struggled a bit first but it worked successfully. One switch did not work but the other did. Since it`s canbus and each switch is probly coded, I got lucky I think. Video showed everything that needed to be added or changed. I used a copy of Op-com to activate cruise.
did you need the cars security code in order to use opcom?
this was very video helpful 1.5mm allen key does the job I took the plastic cover off once it was off my car and sprayed the hell out of it with electrical cleaner and used a clean cloth to remove the muck it worked after that.
DO MORE OF THESE VIDEOS FOR THE VECTRA C. I NEED MORE
Спасибо за помощь! Всё сделал как на видео и получилось)
Now where could I buy a indicator that has cruise control? I live in Spain so I am trying to use Amazon Spain
Does the job look the same for fitting/activating traction control? Buy a traction control button, remove blank plate from dashboard where other button would be, plug new button in, plug in Op-Com, activate TCM...?
Hi where can I find the connection wire for the clutch switch please?
People still can`t understand that the connection wire for the clutch is built into the harness. Mine is a 2004 comfort (lowest trim level) and it still has it. It was xipped to wire loom a cm over clutch pedal.
Just did this programming on my other 2005 2.2 DIR automatic. This has a info display (TID or GID etc) and higher trim level. Op-com says it was a 2004 model while selecting a 2005 model only worked. Struggled a lot with this since there was about 20 error codes on EGR, CIM and instrument panel section. Not sure if they are even related. Doing the test sequence failed on cruise control buttons.
Altho I can confirm it works, tested it while driving. Also show a green indicator light in dashboard. No need for clutch switch.
So you didnt need clutch switch just the upper thing?
Hello, Opel Astra G 2000 model Engine model = X16XEL Is it necessary to install a clutch switch after installing the cruise control lever? ( Merhaba , Opel Atra G 2000 model Motor modeli= X 16XEL Hız sabitleyici kolunu taktıktan sonra debriyaj müşürü de takmak gerekli mi? )
Where can i find the wires for the clutch switch
Which diagnostic tool should I use?
Op-Com
What is the software that you are using to activate? Is it official Opel software or other?
The lightning switch !!!! ?🤪
Should I buy anything else if I have automatic transmission?
You just need to buy the Cruise Control Stalk £15. You don't need the clutch control pedal. Mine is automatic so I know this. After that you need to buy on ebay the Op-com CD sofware with the USB interface £15. and follow this video instruction. Is very easy. Just 10 minutes
@@1381432 Do you have a link for the Cruise Control Stalk?
@@dmaher2007 ua-cam.com/video/Avk_-eBXfH4/v-deo.html
@@dmaher2007 ua-cam.com/video/W1ZX3HZPvcY/v-deo.html
I follow all the steps but is not working anyone that can help?
Działa vectra c gts 2.2 dti ::
Trzeba wymienić tylko manetkę kierunku czy tą kostkę pod licznikiem też? Pozdrawiam GTS 2003
Cześć, robiłeś u siebie ten tempomat?
Krzysztof Rykaczewski robiłem ja
I działa?
Przełącznik sprzęgła też trzeba (tą kostkę)?