CX500 Build - Fabricating An Oil Catch Can! - EP55
Вставка
- Опубліковано 16 жов 2024
- The CX500 build continues with me fabricating an oil catch can for the PCV system! I did this in order to separate the oil from the air exiting the crankcase before it is sent to atmosphere. This will help keep any oil from getting on the ground or the bike in droplet form which makes a mess and is just bad for the environment. This system is ran purely from positive crankcase pressure and has no vacuum signal ran to it so we will see how it works.
Materials used:
Schedule 40 6061 aluminum pipe
1/8" 6061 Aluminum flat stock
Parts used:
1/4" NPT to 1/2" hose barb fitting - Local auto parts store
1/4" NPT drain valve fitting - Local auto parts store
MISC hoses from HPS - hpsperformance...
UNI Breather filter - Bought local from a motorcycle shop
Billet tapped cover - www.dimecitycy...
Welder used - Used Miller Syncrowave 180SD
Pure green Tungsten - 3/32
Gas Lense with #8 cup
120 amps with peddle
About 25 CFH
For daily updates on this project as well as others be sure to follow along on all the Brick House Builds social media platforms!
Instagram - / brickhousebuilds
Facebook - / brick-house-builds-108...
Website - www.brickhouse...