To learn more about our fog machines please visit us at: SmokeGENIE - pmigear.com/pages/about-smokegenie SmokeNINJA - pmigear.com/pages/about-smokeninja
Looks like a great product! Don't buy the Vosentech smoke machine, mine lasted 3 months, leaked, never worked again. Errored out with a blinking light. $300 down the drain. Great to see better options! I need to buy one.
The one issue with the Ninja that I havent seen PMI address is that once you used up the 1 min time limit on the Ninja's Fog Mode, the Ninja would stop the device to prevent coil burning. But how long is that down time is what I dont hear PMI addressing? How long is the cool down time for the Ninja to be back up for usage again after the 1 min limit kicks in? 1 min 3 min 5 min or 10 min? Because if it takes forever for the Ninja's health bar to go back up to full for the next use than I would rather stay with the Genie.
@@zerooverzero Yes 100% correct! for every second of cooldown, you gain 1 second. You can choose to stop at anytime during the minute and start again whenever during the cooldown! If you used up the ENTIRE 60 seconds without stopping, the ninja will give a hard timeout of 3 seconds. But afterwards, the same cooldown process continues! It will be super intuitive once you use it!
Actually the SmokeNINJA can make Haze! It should fill a 50sq metre studio with no problems. Simply set it to fog mode, spray 20-30 seconds, and have it set for a minute. The haze will hang for a very long time! As for the continuous output of the Genie, it can go up to 10 minutes without any breaks in between. Does anyone want to see an uncut video of that?
The 3 preset modes on the Ninja are Fog, Steam and Dry-ice; each of these fog types has a specific volume that is tuned to the best effect! So if you want to further control the smoke output, you can experiment with the nozzles and work from there!
Still some EARLYBIRD packages left on Kickstarter! www.kickstarter.com/projects/pmigear/smokeninja-next-gen-portable-smoke-machine-for-photography As a summary, Here is a detailed Breakdown of the differences! -Continuous output Genie is very much designed to be fit for endurance performance on set. It can run continuously without pause for over 10 minutes. This is very necessary when you need to do an intense shoot of multiple takes back to back. For the Ninja, it has a continuous output of up to 1 minute, which is enough for entry level creators who doesn't need that intensity! -Large scale coverage Based on the Endurance performance of the Genie, it is much easier for the genie to cover a huge area of 2000+ square feet space. For the Ninja, it's best for small indoor studios. That's why if you intend to make a lot of cinematic Haze, even though the Smoke of the Ninja will turn into a fine haze, we think Genie will be much better for Quickly hazing up a large room. -3 Automatic Presets vs 100 Manual Toggles The Ninja is all about being intuitive, so we have all the modes as Presets. The control is more in the shooter's "sleight of hand", the way you would shape smoke like a paintbrush. The Genie is all about precision, it has 10 levels of smoke and wind power, that allows the user to have really high precision when it comes to how much smoke output needs to be released by the machine. So if you are into high precision, Genie is for you!
Just got the SmokeGENIE and love it! Now, I want the SmokeNINJA too! I'm working on an E-Skooter review and just finished the thumbnail for it using the SmokeGENIE and can't wait for people to see it! Keep up the great work and I wish you a lot of success!!!
Hi, I'm a buyer from South Korea using SmokeGENIE. Thank you so much for the great video. I am mainly using the product for particle generation in my experiments. I would like to know the particle diameter of the smoke produced when using the 120ml cloud formula. I would really appreciate your response. Have a nice day.
Yes! The SmokeNINJA can make Haze! It should fill a 50sq metre studio with no problems. Simply set it to fog mode, spray 20-30 seconds, and have it set for a minute. The haze will hang for a very long time!
Creating a more affordable pro-sumer option was absolutely GENIUS! You guys will unlock a whole other market that wanted access to your fantastic product, but couldn’t swing the price. Cheers to your success and continued innovation 🎉
Nice. This definitely addresses the lower budget units in the market today. As a longtime product reviewer, PMI would definitely be the standard that I would test any other unit against.
Hey thanks for asking! We have a smart cooldown system, where every second of rest gains 1 second of Spray time! so resting the machine for 10 seconds will gain 10 seconds of burst, so on. Hope this makes sense!
So the ninja cam only do up to 1 minute bursts. How soon after the 1 minute burst can it go again and how much minutes/hours of smoke liquid per refill?
To learn more about our fog machines please visit us at:
SmokeGENIE - pmigear.com/pages/about-smokegenie
SmokeNINJA - pmigear.com/pages/about-smokeninja
Haze is what is missing, small shots need haze as well.
Looks like a great product! Don't buy the Vosentech smoke machine, mine lasted 3 months, leaked, never worked again. Errored out with a blinking light. $300 down the drain. Great to see better options! I need to buy one.
I highly recommend PMI Gear Products!
I have the SmokeGENIE and I love it! one of my favourite filmmaking gear! 👏😎
A Genie grants wishes, a Ninja could cut you and a Genie probably wouldn't do that. 🤦♂🤣
Would love to test the Ninja on a shoot outdoors and share a video with my audience, feel free to reach out if you're interested in a collab ✌🏼
Hey! Thanks for getting in touch!
The one issue with the Ninja that I havent seen PMI address is that once you used up the 1 min time limit on the Ninja's Fog Mode, the Ninja would stop the device to prevent coil burning. But how long is that down time is what I dont hear PMI addressing? How long is the cool down time for the Ninja to be back up for usage again after the 1 min limit kicks in? 1 min 3 min 5 min or 10 min? Because if it takes forever for the Ninja's health bar to go back up to full for the next use than I would rather stay with the Genie.
I saw on the Kickstart that for every second of downtime you gain a second of use.
@@zerooverzero Yes 100% correct!
for every second of cooldown, you gain 1 second. You can choose to stop at anytime during the minute and start again whenever during the cooldown!
If you used up the ENTIRE 60 seconds without stopping, the ninja will give a hard timeout of 3 seconds. But afterwards, the same cooldown process continues! It will be super intuitive once you use it!
🔥 Wish it did haze and mist as well 🤔 Wondering how long the SmokeGenie can continuously spread smoke for, since the Ninja is one minute?
Actually the SmokeNINJA can make Haze! It should fill a 50sq metre studio with no problems. Simply set it to fog mode, spray 20-30 seconds, and have it set for a minute. The haze will hang for a very long time!
As for the continuous output of the Genie, it can go up to 10 minutes without any breaks in between. Does anyone want to see an uncut video of that?
@@pmi_gearThank you! Good to know 💚
Can it be used for halloween props?
You definitely can! The fog formula is 100% food Safe and Lab tested by SGS. Build away with your Halloween props!
With Ninja u have the options of dry ice etc. Are u able to control the volume of smoke on any setting?
The 3 preset modes on the Ninja are Fog, Steam and Dry-ice; each of these fog types has a specific volume that is tuned to the best effect! So if you want to further control the smoke output, you can experiment with the nozzles and work from there!
Still some EARLYBIRD packages left on Kickstarter!
www.kickstarter.com/projects/pmigear/smokeninja-next-gen-portable-smoke-machine-for-photography
As a summary, Here is a detailed Breakdown of the differences!
-Continuous output
Genie is very much designed to be fit for endurance performance on set. It can run continuously without pause for over 10 minutes. This is very necessary when you need to do an intense shoot of multiple takes back to back. For the Ninja, it has a continuous output of up to 1 minute, which is enough for entry level creators who doesn't need that intensity!
-Large scale coverage
Based on the Endurance performance of the Genie, it is much easier for the genie to cover a huge area of 2000+ square feet space. For the Ninja, it's best for small indoor studios. That's why if you intend to make a lot of cinematic Haze, even though the Smoke of the Ninja will turn into a fine haze, we think Genie will be much better for Quickly hazing up a large room.
-3 Automatic Presets vs 100 Manual Toggles
The Ninja is all about being intuitive, so we have all the modes as Presets. The control is more in the shooter's "sleight of hand", the way you would shape smoke like a paintbrush.
The Genie is all about precision, it has 10 levels of smoke and wind power, that allows the user to have really high precision when it comes to how much smoke output needs to be released by the machine. So if you are into high precision, Genie is for you!
Just got the SmokeGENIE and love it! Now, I want the SmokeNINJA too! I'm working on an E-Skooter review and just finished the thumbnail for it using the SmokeGENIE and can't wait for people to see it! Keep up the great work and I wish you a lot of success!!!
Hello, how's the item? Will you recommend it for long usage?
What is the difference in standalone unit weight between the two? Cannot find any specs on the SmokeGenie's weight anywhere.
Im sooo excited for this smaller size! I’ll be supporting the kickstarter!
This looks amazing! It's perfect for what I need. I shoot a lot of toys and miniature things.
Hi, I'm a buyer from South Korea using SmokeGENIE.
Thank you so much for the great video.
I am mainly using the product for particle generation in my experiments.
I would like to know the particle diameter of the smoke produced when using the 120ml cloud formula.
I would really appreciate your response.
Have a nice day.
My orders in🎉Thank You
Looking like an awesome entry option :D
Thanks Heather! We are excited too!
Hello pmi😊 I was just wondering what the containments of the smoke juice? like if it has vegetable glycerin or others
Is there a way to get it to make haze?
Yes! The SmokeNINJA can make Haze! It should fill a 50sq metre studio with no problems. Simply set it to fog mode, spray 20-30 seconds, and have it set for a minute. The haze will hang for a very long time!
@@pmi_gear thanks. Can't wait to get mine!
Sounds really cool definitely looking forward to the Kickstarter!
Cheers! thank you so much!
Creating a more affordable pro-sumer option was absolutely GENIUS! You guys will unlock a whole other market that wanted access to your fantastic product, but couldn’t swing the price. Cheers to your success and continued innovation 🎉
Cheers thank you JJ!
Nice. This definitely addresses the lower budget units in the market today. As a longtime product reviewer, PMI would definitely be the standard that I would test any other unit against.
Appreciated it! cheers!
I understood that the ninja is limited to a 60 seconds working time. How long is the recovery time to the next 60 seconds?
Hey thanks for asking! We have a smart cooldown system, where every second of rest gains 1 second of Spray time! so resting the machine for 10 seconds will gain 10 seconds of burst, so on. Hope this makes sense!
I just discovered this product but found that the kickstarter is over:( is it still possible to order one?
We are doing the retail launch this month! Which country are you from?
@@pmi_gear I'm in the USA. What is the date of the launch?
Can you use it instantly or does it take time to warm up?
Can i put pure glycerin in there?
It says the chamber lasts 100 hours. Where can people get a new chamber when it wears out?
We are in many retail camera shops around the world! Check our latest video for a shortlist
thank you for this video
Awesome 👏
So the ninja cam only do up to 1 minute bursts. How soon after the 1 minute burst can it go again and how much minutes/hours of smoke liquid per refill?
Hello, are you considering working with a distributor in Turkiye? We want to buy these products :)
Bought one today from the Photography and Video Show. I met this chap. A very impressive man. A great product too!
You got my attention...
Thank you for the attention! :)
:)
Hey it's Look Solutions! Thanks for the appreciation guys! :)
Where can I buy one? It wont let me on the site..
Where can it be bought in Europe?
PMI hasn't been fulfilling their Kickstarter orders.