That is the coolest upgrade you could do to this bike other than a FRONT HUB MOTOR! I gotta say that was funny where you completely disassembled the QUICK RELEASE to take the wheel off the bike.........LOL................
So many videos showing how to change to the suspension fork but not a single one shows the most important part. Removing the part from the brakes so you can attach them to the different attachment on the suspension forks. You have to unscrew the bar off the actual brake that has the model F160/R140 and remove it. Then you can attach them to the new suspension fork. For a complete ebike/disc brake noob like myself I just spent an entire day trying to figure this out.
Great video. Except you don't need to hammer open the bracket that holds the brake line. Just undo the cable at the caliper and slide the whole thing thru thru clip.
@ 4:52 you pulled out the bolt to bottom forks can you send me a picture i have engwe pro the part was missing from mine but everything looks the same can you tell me what it is?
I bought a 26" front hub motor ebike kit. But I'd like to look around for a different used bike to put it on. Currently have the kit on a Schwinn Sidewinder ("Women Inspired") with a SUNTOUR aluminum shock fork (not tapered). I'm wondering what my limits are if I want to go wild and frankenstein something together. I assume I could buy a bike with 24" wheels and change out the front fork to 26" - am I right? But, what if I found an old BMX type bike with 20" tires - could I put my 26" forks on that frame? Not that I particularly want to do that - just trying to determine how universal forks are.
Due to the increase width of the fork i suspect there will be difficulty folding the bike and putting it into the trunk of the car. Guess something gots to give.
What about if the headset is threaded and the fork is threatless? How can you fit it? Because I have this problem. I have Paselec px6 fat tire bike and I brought air fork 1-1/8 but it didn’t fit to stem because of the stem is threaded. What is the best way to do fit it?
That is the coolest upgrade you could do to this bike other than a FRONT HUB MOTOR! I gotta say that was funny where you completely disassembled the QUICK RELEASE to take the wheel off the bike.........LOL................
😂🤣
So many videos showing how to change to the suspension fork but not a single one shows the most important part. Removing the part from the brakes so you can attach them to the different attachment on the suspension forks. You have to unscrew the bar off the actual brake that has the model F160/R140 and remove it. Then you can attach them to the new suspension fork. For a complete ebike/disc brake noob like myself I just spent an entire day trying to figure this out.
Lol noob
the music playlist here is surely something
Great video. Except you don't need to hammer open the bracket that holds the brake line. Just undo the cable at the caliper and slide the whole thing thru thru clip.
Yeah smashing parts is not typically recommended
Ha Ha
That’s why he got the vans on cmon guys
@@damianlima5135 ?
😂🤣
Nice job on the video. Ecotric is local so I'll be upgrading my forks soon.
I just bought this to install on my Aostirmotor a20. Looks to be a very similar bike. I’ll report how it goes
how did it go? I have same bike and want to try this fork
Same
Did it work ?I have the same bike
@ 4:52 you pulled out the bolt to bottom forks can you send me a picture i have engwe pro the part was missing from mine but everything looks the same can you tell me what it is?
Is it possible to change the whole stem and handlebars on this bike too? Like maybe some how get it to connect straight to the forks?
What kind of maximum travel do you get on a folded bike before it messes up with the bike's geometry ? Like 60mm?
Thanks for the video! I just want to make sure. So this fits a Lectric 1.0 and NO modifications?
Yes,waiting for an answer! Does it fit the lectric 1.0 without modifications?
Voice over and move camera angles might be better, still super helpfull thx!
thank you
I bought a 26" front hub motor ebike kit. But I'd like to look around for a different used bike to put it on. Currently have the kit on a Schwinn Sidewinder ("Women Inspired") with a SUNTOUR aluminum shock fork (not tapered). I'm wondering what my limits are if I want to go wild and frankenstein something together. I assume I could buy a bike with 24" wheels and change out the front fork to 26" - am I right?
But, what if I found an old BMX type bike with 20" tires - could I put my 26" forks on that frame? Not that I particularly want to do that - just trying to determine how universal forks are.
Did you need a crown race?thx
Also did you also install front and rear lamps on ecotric? Just wondering.
good job
Due to the increase width of the fork i suspect there will be difficulty folding the bike and putting it into the trunk of the car. Guess something gots to give.
Did you have to purchase any additional parts for this install?
Nice job! Drop the link even if its sold out.
Is the Ecotric suspension fork threaded or non-threaded?
I installed suspension fork my 20 in fat tire bike and the brake won't fit fork. Bolt holes don't match up. What do I do,?
you need to remove an extra of the brake for the new fork
It totally looks like you put the handle bars on backwards for sure
Do you notice a huge difference with new fork?
you can feel the new fork but not anything crazy
Will this suspension folk fit a rad power radrunner 1?
If you ended up getting this or a suspension kit for your radrunner please let me know I’m looking for one lol
👍👍👍 nice
What about if the headset is threaded and the fork is threatless? How can you fit it? Because I have this problem. I have Paselec px6 fat tire bike and I brought air fork 1-1/8 but it didn’t fit to stem because of the stem is threaded. What is the best way to do fit it?
Buy a threadless head set. Hopefully it is no longer threat at the point.... :)
Get a jet bmx handlebar change your handlebar 🇨🇦🏴🇪🇺🇺🇸🇬🇧
Will this fork suspension fit lectric xp ???
yes
Now you gotta upgrade to BMX or ape hanger handlebars
Sold out already?
Yeah, they are out of stock again 🙁
make the music louder i can barely hear it
Hard to use this video seriously when the guy doingbthe work cant even wear matching shoes
Instead of playing that really irritating music, why didn't you explain what and where to buy the new fork etc? Waste of time.
There are places where you unscrew things out of view. Explain what you are doing. If we knew this stuff, we wouldn't be looking for videos on how to.