- If you're downloading it for your Ally or Legion Go. The steps will be very similar. - On your WINDOWS device. Go to moonlight-stream.org then scroll down and select "moonlight for PC" then select Windows Installer, once its done installing, run the program and you can then select your settings and get your pin, and then follow along the video at 03:41 Pair Pin
question, do I get it right that when you use Moonlight / Sunshine you cannot use your steam input configs per different games? It'll be only 1 config for the sunshine non-steam shortcut, right?
Need help troubleshooting… Upgraded to windows 11 and now my steam deck isn’t seeing my pc. Added nvidia GeForce to firewall, tried to disable firewall. Uninstall/reinstall both sunshine and moonshine on pc and deck. Tried to manually enter ip address. Verified they’re both on the same network. Tried wired with WiFi connection and just WiFi connection. Steamlink immediately sees my pc/deck and works fine but moonlight doesn’t see my pc. Only an issue since upgrading to win 11. Any ideas?
Hoping someone can help me out. All of this worked for me, but when I play Tunic via Game Pass, the game is not fully recognizing that I'm playing on controller (aka, Steamdeck). Some buttons work, some still show the keyboard input. How can I get it to fully allow me to use Steamdeck controls?
I assume any time you launch something this way, it takes a second to do all the key bindings because most games won't automatically recognize the Steam deck, correct? I'm planning on getting a Deck solely for game streaming but just want to know if that's something to anticipate!
After you set your key bindings they should automatically apply next time so it won’t require you to do it over and over. You can just pick up and play.
Your tutorial helps me a lot but my main problem is when my monitor is turned off i only have black screen on my deck until i turn on my monitor again. In short I cant stream my desktop or games of my monitor is off
I managed to put several emulators on this system, but with the Dolphin emulator it gives the following error: something went wrong on your PC when starting the transmission. Make sure you do not have any DRM protected content OPEN ON YOUR PC. Do you know how to solve it?
I'm just using my native 2k resolution on the monitor. You can tinker with the settings on the steram deck to see what looks best. It doesnt work perfectly because of the aspect ratio of the steam deck.
I think there’s a way where you have to leave your PC settings to allow remote access from when you’re away from home. I haven’t done it personally so I can’t speak to how well it works.
Thanks for this easy video to follow. Everything else I found was a year+ old but this was a great step by step process. Maybe I missed it in the video, but how do you get the resolution on your PC to fit to your steam decks resolution? I play on a 32:9 (Samsung G9 OLED) and whenever I play on my deck its just too small to see and I have black bars on the top/bottom because of the wider screen. Any input?
You have to go to the deck settings and try different output settings for the monitor. I had to go through a few until I found one that works decently.
@@Rebe-Caufman LOLOOL! Hall-Effect sticks/bumpers and a microSD card reader that doesn't burn out. So funny. If you're streaming, your PC is doing all of the work, so just pick the device with the features you like the most.
- If you're downloading it for your Ally or Legion Go. The steps will be very similar.
- On your WINDOWS device. Go to moonlight-stream.org then scroll down and select "moonlight for PC" then select Windows Installer, once its done installing, run the program and you can then select your settings and get your pin, and then follow along the video at 03:41 Pair Pin
"Wife keeps spending money" lol, I feel this
thanks for this, made set up quick and now i can finally get 60fps in cyberpunk 2077 hahahahaha
How is the latency?
@@DTunezOfficial really not too terrible just make sure the game is set to the fps you wanna run it at on steam deck
I can't add the detached command, I am given no "+" to do so.... You know what could that be?
Moonlight is not showing on the Add Non-Steam game menu :( anyone has a fix?
I dont get any sound on my steamdeck oled when streaming. do u have this problem too?
No I haven’t run into that issue. It’s been working fine on my end.
I think u have to select a different sound device on your host computer, right click on speaker icon... yada yada
Yeah, select "steam" in the audio devices
Brotha it worked but I can’t move my mouse on moonlight to click things from my pc. Please help :’ )
question, do I get it right that when you use Moonlight / Sunshine you cannot use your steam input configs per different games? It'll be only 1 config for the sunshine non-steam shortcut, right?
I think you should still have your different configuration but honesty I’m not sure. I only use the basic configs.
Is this just for remote play or what am I missing?
Need help troubleshooting… Upgraded to windows 11 and now my steam deck isn’t seeing my pc. Added nvidia GeForce to firewall, tried to disable firewall. Uninstall/reinstall both sunshine and moonshine on pc and deck. Tried to manually enter ip address. Verified they’re both on the same network. Tried wired with WiFi connection and just WiFi connection. Steamlink immediately sees my pc/deck and works fine but moonlight doesn’t see my pc. Only an issue since upgrading to win 11. Any ideas?
Hoping someone can help me out. All of this worked for me, but when I play Tunic via Game Pass, the game is not fully recognizing that I'm playing on controller (aka, Steamdeck). Some buttons work, some still show the keyboard input. How can I get it to fully allow me to use Steamdeck controls?
Have you tried different steam community controllers/button settings to see if that works?
I assume any time you launch something this way, it takes a second to do all the key bindings because most games won't automatically recognize the Steam deck, correct?
I'm planning on getting a Deck solely for game streaming but just want to know if that's something to anticipate!
After you set your key bindings they should automatically apply next time so it won’t require you to do it over and over. You can just pick up and play.
Your tutorial helps me a lot but my main problem is when my monitor is turned off i only have black screen on my deck until i turn on my monitor again. In short I cant stream my desktop or games of my monitor is off
check your mirroring settings for the monitor and steam deck. If it's mirrored then that might be the issue.
I managed to put several emulators on this system, but with the Dolphin emulator it gives the following error: something went wrong on your PC when starting the transmission. Make sure you do not have any DRM protected content OPEN ON YOUR PC. Do you know how to solve it?
Have you tried removing the emulator completely and then reinstalling it. When using dolphin do you have any other games open in the background?
Can you tell me if i can do this: play a game on the phone while the monitor is showing another app, like a browser, for example?
Not quite sure what you mean. Like if you’re using this on your phone?
Brother moonlight is not appearing in my steam deck discover
Thats strange, im not really sure why it wouldn't be there. Have you updated to the latest software and are connected to the internet?
My Mouse doesn't work as soon as I start a game, I tried out the different settings, but nothing works. Do you know what I can do about that?
Hi, sorry for the late reply. Did you end up figuring out what the issue was? I'm not familiar with this.
Name of song playing in beginning portion of tutorial, please?
Heart Break · Vibe Tracks
what resolution do you have your pc set as while using steamdeck? my text on Windows and in games always look pixelated 😅
I'm just using my native 2k resolution on the monitor. You can tinker with the settings on the steram deck to see what looks best. It doesnt work perfectly because of the aspect ratio of the steam deck.
Everything works fine when I’m at home on the same network, but when I’m away, I can’t seem to connect to my home PC at all. Does this allow for that?
I think there’s a way where you have to leave your PC settings to allow remote access from when you’re away from home. I haven’t done it personally so I can’t speak to how well it works.
Steam deck as HOST , work?
Sorry poor english, im brazilian
Thanks for this easy video to follow. Everything else I found was a year+ old but this was a great step by step process. Maybe I missed it in the video, but how do you get the resolution on your PC to fit to your steam decks resolution? I play on a 32:9 (Samsung G9 OLED) and whenever I play on my deck its just too small to see and I have black bars on the top/bottom because of the wider screen. Any input?
You have to go to the deck settings and try different output settings for the monitor. I had to go through a few until I found one that works decently.
I'm assuming doing this with the Claw would be the same as Ally and Legion Go since it's also a windows device?
Thank you.
Yep, very similar for all of them.
claw 😂😂😂
@@Rebe-Caufman LOLOOL! Hall-Effect sticks/bumpers and a microSD card reader that doesn't burn out. So funny.
If you're streaming, your PC is doing all of the work, so just pick the device with the features you like the most.
Cảm ơn bạn!
Wow, thank you for that. I appreciate it.