विज्ञान उतना आसान नहीं जितना कुछ लोग समझते हैं, किन्तु इनके इस जज्बे को सलाम है जिन्होने इतनी मेहनत और इनवेस्टमेंट की, इसलिए बिना जांचे सवाल उठाना हीन मानसिकता दिखाता है
The flywheel store the energy which will run the generator and the generator supply energy to the motor that maintain the flywheel running. After getting speed the flywheel needs very few energy to continue running and the weight of the generator is much more light and needs fewer energy than is being supllied by the flywheel thats why this system do not stop. The energy supplied by the generator must be limited to 60% of the energy stored in the flywheel. As much weight and speed of the flywheel more energy is stored and more energy may be generated.
13:12 Yes, the farther from axle, the more inertia can be created. That's why flywheel with spokes and Thicker outer ring will be optimistic solution. Because it will be light weight and creates more inertia.
Dear Bhaskar Ji Namaskar Today once again your video appeared on screen. I enjoyed it and this invention has a potential to change the world.. Barkat Ahmad
Actually this a a very old tech. In Sweden in 1950s they made buses with this principle. But they had to drop it due to difficulty in handling. It was later tried several times as a mechanical battery. But no one has used it efficiently yet due to the risks involved, lack of control, overcoming heavy friction and attached problems to it. It's a great idea and a find, but cannot actually say it's never been done.
No. If we can fly to the moon and back, what is unsafe with this achaic technology? The reason it is not used is that it does not work.@@mbhekitembe2179
It was not dropped from the bus because of difficulty, but because of the advent of trams and electrochemical batteries. There is an Australian company that used this technology to store energy as an alternative to lithium-ion batteries. They succeeded in rotating the block 100,000 revolutions per minute. I think flywheel technology is a promising technology but has not been seriously considered.
I don't understand its working. You supply energy from external source and save in a flywheel, then stop external energy, and use the stored energy. When fly wheel slows down you again supply external energy and bring back to 450 rpm. This is how a battery works. Also connect big loads and demo for 24 hours
This is just a storage device means mechanical energy storage in the form of momentum in fly wheel. Conservation of energy is always valid so nothing will give more energy than it has consumed.
No not like that not store in fly wheel , he taking the generator power to main motor , slowly power generation in generate will reduce in some time due to heavy fly wheel power reduction will happen in 2 to 3 hour at same time we can use this power for industrial or home then we can give external power for reach 450 rpm , then cycle continues next 3 hour free energy
To make you understand it's simple he is giving 1 volt and taking 100 volt out of it by using 1 volt ok... Still if you don't understand he can keep external battery running completely dry and 1 volt till end and produce 100 volt till end .. Not only you most scientists in our country are like you never accept anything and never 🤗 i too face many in my thoughts.. and presentations...
Thank you sir. He is giving 1 volt for 100 mins and taking, 100V for less than one minute ( due to efficiency), am I right? . what is the input in KW and what is the output KW. Why this type of power generators are not available/installed in remote areas? Suppose we have a mountain house which needs about 10KW power. Can we charge a 12V battery with solar panels, run a 12V motor as a prime mover to get the flywheel to required speed and connect a 10KW load. will the power be available 24hrs with out interruption? Sorry to ask you too many questions sir, don't mistake me.
Excelent gadget. One firm in Jalandhar has been actually taking advantage of the principle since late 70 & early eighty. I am not aware of the present situation.
The law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time.[1] In the case of a closed system the principle says that the total amount of energy within the system can only be changed through energy entering or leaving the system. Energy can neither be created nor destroyed; rather, it can only be transformed or transferred from one form to another. So when energy exctracted from closed system to run pump or light, mechanical kinetic energy stored in flywheel will decrease and when stored kinetic energy is completely transformed to electric energy and consumed system will stop.
Geliliyo nijam chepadu. Kaani etanu abadam cheputhunadu. Anduke it's not have any merit in it. It's a scam. Inkevaru leru prapancham lo. Etane medavi. Eam kotdanam undi endulo. It's just a pakka scam.
you are right bro flywheel can't provide extra energy from gravitational force because energy losses will increase in the form of friction and motor and Dynamo in the form of heat so this is just a stupid idea 💡😂
Wish to share Abraham Lincoln quote :) You can fool all the people sometimes, some people all the time but you cannot fool all the people, all the time.
It will stop, it just takes longer because of the flywheel. The giant flywheel needs an external input energy to start breaking the inertia and run to its optimal speed, at that point the flywheel already had stored the initial power introduced into it at the startup, without an external power supplied afterwards, the flywheel's stored energy will be used up by the load and other energy losses that will diminish its power until those gigantic flywheel comes into a Full Stop!! Power input = Power output + heat loss + friction + air resistance + work against gravity + load, etc. --- First Law of Thermodynamics, "Energy can not be created or destroyed, it can only be transformed."
Do you realize the cost of the flywheels and the gearboxes , electric motors and generators. Seems like lot of cost and machine work just to deal with frequent blackouts
Practically it wont run even few seconds on load (which will act as brake). If we take the efficiency as 99.99% it will spin for few milliseconds theoretically (*as the load on it increases the losses will also increase). This is high school knowledge. The momentum stored in the flywheel; moment of inertia (Gd²) is 0.5xmass x radius². If you rotate for a minute or 2 hour the energy stored will be the same.
i agree, but it helps boost the power. If we keep on running the system on smaller horsepower, it is able to take the jerk load up to an extent. It is a power booster.
Serious investment and great setup indeed. Imagine if the spin-up source is regenerative.. Could you please measure the power consumed to spin up the whole flywheel setup and then the amount of useful electrical energy extracted back from it before spinning it up again? What would be the ratio between input and output ? Curious how the output ratios with the input, with all the mechanical frictions, friction with air and the flat surface of the spinning wheel etc. Yet to be convinced though, that this mechanical energy store is better or even as good as a chemical battery setup.
No RAW data how can we belive, one of the video, mentioned 15A used by motor and 28A generated. But how long? We need data, can it be run day and night? 365 days?
Chal Bilkul raha hai 90kw me 6 ac 1.5ton run karne chahiye 150 fans chalne chahiye all house any thing sab chalni chahiye ye gareeb keliye nahi hai ameer ke liye hai Weldone wonderful work
Gyrobus flywheel was officially used long back for fast charging and to run public transportation bus ...just search for Gyrobus...but how the system is able to multiply input energy and generate more energy than input ?
No one is adding up all the loses due to friction of the bearings and the air around each wheel. plus the heat from moving the generator and its own bearings.
Great work One farmer in Dewas MP used one motor power and run around 28 motors based likely on this principle only, but not heard more of him afterwards But this technology is a possibility
Congrats. You have solved the worlds energy problem and pollution problem in one shot. Artic ice will not melt anymore and himalayan glacier will recover. Thank you for saving planet earth. 😴😴
It's just a mechanical storage device. So some losses are there too. It can't sustain longer time if load will be higher otherwise conservation of energy will be wrong.
How do you say okay I'm going to have to let you have it now conservation of energy sucks because they are wrong always they're just trying to keep everybody down keep everybody in slavery
The principal here is, you consume less electricity to produce more electricity.. its not completely free energy but it requires electricity to generate electricity 🔌🔌🔌
@lahsukramuk__ : At ground floor level, IMPACT POST is a MUST- consist of "post grade" poured concrete POST, reinforced with 2-3 inches diam. deformed STEEL bar... Underground basement, 10-12.feet below the ground, was an ideal installation site, of FLYWHEEL type of Genset...
Excellant sir, this creation tangibly debunks thermodynamic roles, n seems to be based on Vedic understanding of energy (infinite). You spoke of using spoked flywheel for accelerated n amplified performance. If u mimic the sudarshan chakra, with exactly 108 equidistant spokes, u will find the sweet spot for the constant to produce highest performance. Very excited n eager to know more. Best wishes! 🙏
But as per Gita and physics energy cant be created or destroyed. It just transforms from one state to another. Here the excess energy created will it tilt the solar system or just our Glaxy?
Gita doesn't say energy can't be created or destroyed. What do you think God's Bramha and Shiva do? In fact, the battery laid by Agastya does create, transfer and destroy energy as required in endless cycles. The limits of white man physics are now obvious to many. If you still want to follow, your choice. But the Hindu science is clear about limitless-ness of energy.
Their face, this was discovered by our master in Chittoor district on 1992. The project did not come into use due to lack of encouragement from the then Chandrababu government.
One cannot get more energy than that is “charged” in the flywheel given by the equation = 1/2 mV^2 So, there is no free lunch. The efficiency of this system shall be approx 80% and hence the system shall stop after delivering 80% of what it has received. 20% is the loss…
Are you trying to fool the viewers or you mis understood the law of conservation of energy. If you are saying these fly wheel will run for ever. Why have you started it with the motor? It was stationery in the beginning. By using 5hp or 10hp motor you rotated 50 ton 100 ton fly wheel at 450 RPM for x minutes. That much of electrical energy converted into mechanical energy, you have connected another generator to convert that mechanical energy to electrical energy and connected lesser load. It will run for some time till the kinetic energy is converted into electrical energy. If there was no load connected the flywheel will rotate for longer time. This is highschool science.
Practically it wont run even few seconds on load (which will act as brake). If we take the efficiency as 99.99% it will spin for few milliseconds theoretically (*as the load on it increases the losses will increase)
High school science never takes in to account gravity for kinetic energy or angular momentum equations. This patent from Bhaskar covers that untapped gravity for producing electricity.
Actually u did not understood concept i think he is extracting energy after some point with the less energy and generating more with the velocity and the difference between the low power consumption and high genaration and the difference is actual power generation well I am not good in it but I understood concept
He is a scientist. Obviously he knows that high school science. Still he spent lots of time and money. I think there are something that we don’t understand. I am requesting that scientist please describe the theory/principle and please consult this local electric sub division and supply your electricity. Also please apply for patent.
But i think maintenance charges will touch other electricity generator's raw material's cost Means its energy unit cost is equivalent to others energy units by maintenance
Please install a system in an Industry and provide energy at low cost. Publish the power input, power output and power gain data. Congratulations. If you prove a practical use for one year, then you can start mass production.. one question, Say now you are using a 4' dia, 12 ton flywheel, if you use a spokes flywheel 16' dia and is a 3 ton flywheel is enough? let me know, thanks. May Lord Venkateswara bless you.
Once Physics says that a perpetual motion machine is not possible then it is not. Even if you don't put any external load, still the generator out put will not be sufficient to run the motors as input can never be equal to out put due to frictional losses. Eventually the machine will stop only thing is, bigger the momentum longer is the time before it stops.
The hard work behind making of this setup is appreciable but, fundamental law of energy cannot be break in which it energy can't be created nor destroyed it is just converted into one form to another. In this setup the energy supplied to gain momentum of flywheel is just converted back into electrical energy by alternator, your claim can't be true until and unless you kept powering the flywheels and extracting energy back from it which i think that it might be not suitable way as mechanical losses and other losses are acting in this procedure undoubtedly this setup can be used for backup power supply with no interruption between switching but as you claim that it can generated energy can't be justified.
विज्ञान उतना आसान नहीं जितना कुछ लोग समझते हैं, किन्तु इनके इस जज्बे को सलाम है जिन्होने इतनी मेहनत और इनवेस्टमेंट की, इसलिए बिना जांचे सवाल उठाना हीन मानसिकता दिखाता है
Ani chrust nepozná zákony aerodynamický a predca lieta
Vigyan bilkul Saral hai bus Vigyan Samajh Mein Aana chahie
The flywheel store the energy which will run the generator and the generator supply energy to the motor that maintain the flywheel running. After getting speed the flywheel needs very few energy to continue running and the weight of the generator is much more light and needs fewer energy than is being supllied by the flywheel thats why this system do not stop. The energy supplied by the generator must be limited to 60% of the energy stored in the flywheel. As much weight and speed of the flywheel more energy is stored and more energy may be generated.
13:12 Yes, the farther from axle, the more inertia can be created. That's why flywheel with spokes and Thicker outer ring will be optimistic solution. Because it will be light weight and creates more inertia.
There is no meaning in advertising like this in the social media.. you prove it scientifically and start power generation units .
when you call this guys he asked about the expenses in crore
Dear Bhaskar Ji
Namaskar
Today once again your video appeared on screen. I enjoyed it and this invention has a potential to change the world..
Barkat Ahmad
Actually this a a very old tech. In Sweden in 1950s they made buses with this principle. But they had to drop it due to difficulty in handling. It was later tried several times as a mechanical battery. But no one has used it efficiently yet due to the risks involved, lack of control, overcoming heavy friction and attached problems to it. It's a great idea and a find, but cannot actually say it's never been done.
You are correct, this technology is difficult to safely package and use it commercially. Modern world would not tolerate the low safety standards.
No. If we can fly to the moon and back, what is unsafe with this achaic technology? The reason it is not used is that it does not work.@@mbhekitembe2179
What low safety standards for something that is not more complicated than a Bicycle?@@mbhekitembe2179
It was not dropped from the bus because of difficulty, but because of the advent of trams and electrochemical batteries. There is an Australian company that used this technology to store energy as an alternative to lithium-ion batteries. They succeeded in rotating the block 100,000 revolutions per minute. I think flywheel technology is a promising technology but has not been seriously considered.
Locomotives had it.
Very good project 🎉Thanks
Although its not a new idea but he has done tremendous work which should be appreciated
I don't understand its working. You supply energy from external source and save in a flywheel, then stop external energy, and use the stored energy. When fly wheel slows down you again supply external energy and bring back to 450 rpm. This is how a battery works. Also connect big loads and demo for 24 hours
Hello sir
This is fly wheel battery
This is just a storage device means mechanical energy storage in the form of momentum in fly wheel.
Conservation of energy is always valid so nothing will give more energy than it has consumed.
No not like that not store in fly wheel , he taking the generator power to main motor , slowly power generation in generate will reduce in some time due to heavy fly wheel power reduction will happen in 2 to 3 hour at same time we can use this power for industrial or home then we can give external power for reach 450 rpm , then cycle continues next 3 hour free energy
To make you understand it's simple he is giving 1 volt and taking 100 volt out of it by using 1 volt ok...
Still if you don't understand he can keep external battery running completely dry and 1 volt till end and produce 100 volt till end ..
Not only you most scientists in our country are like you never accept anything and never 🤗 i too face many in my thoughts.. and presentations...
Thank you sir. He is giving 1 volt for 100 mins and taking, 100V for less than one minute ( due to efficiency), am I right? . what is the input in KW and what is the output KW. Why this type of power generators are not available/installed in remote areas? Suppose we have a mountain house which needs about 10KW power. Can we charge a 12V battery with solar panels, run a 12V motor as a prime mover to get the flywheel to required speed and connect a 10KW load. will the power be available 24hrs with out interruption? Sorry to ask you too many questions sir, don't mistake me.
Congratulations on such an amazing achievement, can't wait to see your channel grow even bigger.
Excelent gadget. One firm in Jalandhar has been actually taking advantage of the principle since late 70 & early eighty. I am not aware of the present situation.
The law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time.[1] In the case of a closed system the principle says that the total amount of energy within the system can only be changed through energy entering or leaving the system. Energy can neither be created nor destroyed; rather, it can only be transformed or transferred from one form to another.
So when energy exctracted from closed system to run pump or light, mechanical kinetic energy stored in flywheel will decrease and when stored kinetic energy is completely transformed to electric energy and consumed system will stop.
Vậy là điện tuần hoàn hoàn toàn là đáp ứng được cỗ máy đó tạo được bao nhiêu kwh các kĩ sư
Maravilloso estimado amigo !!!
There is nothing like free energy,bas vedio viral karne ke tarike hai
When gelelio told earth shape is sphere he was impresoned, don't get discouraged by bad comments
Geliliyo nijam chepadu. Kaani etanu abadam cheputhunadu. Anduke it's not have any merit in it. It's a scam. Inkevaru leru prapancham lo. Etane medavi. Eam kotdanam undi endulo. It's just a pakka scam.
Absolute scam! They have mental issues
"Law of conservation of energy" RIP🙏A big salute to you and The patent awarding agency 🙏
Actually they converted gravitational energy to electrical energy
@@dheerajaithal9791 gravitation is not an energy!
then y we r using up fuel to rocket into space ,if its not energy force@@Gw5vx
Gravitational force and inertia gets used for creating extra energy and compensate for losses
you are right bro flywheel can't provide extra energy from gravitational force because energy losses will increase in the form of friction and motor and Dynamo in the form of heat so this is just a stupid idea 💡😂
We can train with free of cost.running train wheels could be positive feedback to flywheels.... great project...
Congratulations good job 👍👍
Great Technology sir i need this technology in my Island..
Bahut Atsa masin nikaldaya bina petrol bina diseal wow
Wish to share Abraham Lincoln quote :)
You can fool all the people sometimes, some people all the time but you cannot fool all the people, all the time.
Fake
It will stop, it just takes longer because of the flywheel. The giant flywheel needs an external input energy to start breaking the inertia and run to its optimal speed, at that point the flywheel already had stored the initial power introduced into it at the startup, without an external power supplied afterwards, the flywheel's stored energy will be used up by the load and other energy losses that will diminish its power until those gigantic flywheel comes into a Full Stop!! Power input = Power output + heat loss + friction + air resistance + work against gravity + load, etc. --- First Law of Thermodynamics, "Energy can not be created or destroyed, it can only be transformed."
So when does it go flying apart?
Good educational and informative content you have shown. Good to see this kind of technology that too in our India 🇮🇳
Hi Is this product in India, where is their address or company?
Please stop relating this to India. This is embarrassing and false.
Great & Good morning Sir Our Country is proud of you 🙏🙏🙏🙏
Do you realize the cost of the flywheels and the gearboxes , electric motors and generators. Seems like lot of cost and machine work just to deal with frequent blackouts
Practically it wont run even few seconds on load (which will act as brake). If we take the efficiency as 99.99% it will spin for few milliseconds theoretically (*as the load on it increases the losses will also increase). This is high school knowledge. The momentum stored in the flywheel; moment of inertia (Gd²) is 0.5xmass x radius². If you rotate for a minute or 2 hour the energy stored will be the same.
Right it's just a storage device in the form of momentum.
@@learnandcreation3744 But it will store only a (small) fraction of the energy that is used (consumed) in spinning it. Its totally a hoax.
i agree, but it helps boost the power. If we keep on running the system on smaller horsepower, it is able to take the jerk load up to an extent. It is a power booster.
@@harpalsinghgrewal165 No. the power consumed in rotating the wheel will be much more than the power stored in the flywheel.
It's is mechanical amplifier,, ok.. change in input and output ,,,but how extra energy coming?
The earth spins without a reduction in speed. Humans need more knowledge on perpetual motion.
Pls post Success stories where implemented in clients location.
That is more easy to know the concept
Yes finally You have amended the policy of the government ❤❤❤❤ congratulations
Serious investment and great setup indeed. Imagine if the spin-up source is regenerative..
Could you please measure the power consumed to spin up the whole flywheel setup and then the amount of useful electrical energy extracted back from it before spinning it up again? What would be the ratio between input and output ?
Curious how the output ratios with the input, with all the mechanical frictions, friction with air and the flat surface of the spinning wheel etc.
Yet to be convinced though, that this mechanical energy store is better or even as good as a chemical battery setup.
No RAW data how can we belive, one of the video, mentioned 15A used by motor and 28A generated. But how long? We need data, can it be run day and night? 365 days?
Friction be like *: am i a joke to you, how can it be possible to run days 😂
Muy bueno videos 👍 👏
Vow......It's excellent
You didn’t show the VFD, it’s supposed to be off right?
Hum logon nay bara saal pehly ye experiment Kia tha samjhy Dr SB I'm from Pakistan
Chal Bilkul raha hai 90kw me 6 ac 1.5ton run karne chahiye 150 fans chalne chahiye all house any thing sab chalni chahiye ye gareeb keliye nahi hai ameer ke liye hai Weldone wonderful work
Unbelievable I can't believe
What about energy lossed
100kv power design and fly wheel how much cast sirw
Wow 👍
Gyrobus flywheel was officially used long back for fast charging and to run public transportation bus ...just search for Gyrobus...but how the system is able to multiply input energy and generate more energy than input ?
There is no multiplication here.
Spinning up all those flywheels is just inputting energy that goes down once power is removed.
No one is adding up all the loses due to friction of the bearings and the air around each wheel.
plus the heat from moving the generator and its own bearings.
This method will be more effective with high frequency inductor and capacitor which will enable voltage and current stability
Nice this is amazing
Great work
One farmer in Dewas MP used one motor power and run around 28 motors based likely on this principle only, but not heard more of him afterwards
But this technology is a possibility
@SohamGreens : The designer might be given with "secret & bitter" R.I.P. THERAPHY... (rest- in - peace)...
Sir what about E =mc√2
Congrats. You have solved the worlds energy problem and pollution problem in one shot. Artic ice will not melt anymore and himalayan glacier will recover. Thank you for saving planet earth. 😴😴
@Mr Technical Brohi ️😃😃😃
It's just a mechanical storage device. So some losses are there too. It can't sustain longer time if load will be higher otherwise conservation of energy will be wrong.
Actually there are some mistakes and voids in the energy v=conservation law
How do you say okay I'm going to have to let you have it now conservation of energy sucks because they are wrong always they're just trying to keep everybody down keep everybody in slavery
- Расскажите, как работает ваше устройство?
- У-у-у-у...
Plz also share the detail of input motor and output. Also flywheel load.
Lakin sir jis motor se flywheel ko rotate kiya jaa raha h usko too electricity di jaa rahi h . Too free kese ho gya .
First input dene ke bad system 450 pe aane ke bad sir ne electrical supply main band kar de.
Iska use underground me kiya jaye aur upar ev cars ko charge karene ke liye ise use me liya jaye
if this is true it works this technology for zero cost energy or it is a super jdniale invention this man should get the nobel prize
Isko chote model me chnge kro then markit me utaro bhut achaa rhe ga bhai
This is how a power grid works...powering the province in small amound of water turbine source
one big problem with this technology i noticed, the bearings were very expensive and laborious to replaced, they easily wear-off and dangerous..
It's is mechanical amplifier,, ok.. change in input and output ,,,but how extra energy coming?
Love it sir ......ek bar mulaqat krni thi bss ap se
Neither power can be created nor destroyed. Only you can convert one energy to another.
Ye we 15 year ago made this system and working in skardu.
1st start by line power and when run the self generator by fly wheel then line poelwer off.
The principal here is, you consume less electricity to produce more electricity.. its not completely free energy but it requires electricity to generate electricity 🔌🔌🔌
The extra energy u recieve is freee!
Do you get electricity bill or you generate your own electricity?
Excellent
Great 👍 👌
Very good
Good but yah waqth key sath sath RPM km krega bro or last main stop ✋ hoga.
12 ton rotating wheel at RPM of 450....if any mishap happen it will damage the whole workshop
@lahsukramuk__ : At ground floor level, IMPACT POST is a MUST- consist of "post grade" poured concrete POST, reinforced with 2-3 inches diam. deformed STEEL bar...
Underground basement, 10-12.feet below the ground, was an ideal installation site, of FLYWHEEL type of Genset...
Good video 💪💪💪💪💪
👌❤
You can use vacuum enclosure for more efficiency by eliminating air drag.
Even the magnets can be used
What about vibration, sound, heat all are kind of energy comes for??
Efficiency?
ใช้งานได้จริง แต่ต้องใช้ ระบบเกียร์ ลดรอบ ให้ความเร็วต่ำและใช้ Generator.ทึ่มีความเร็วรอบต่ำเช่น 60rpm. 80rpm.ฯลฯ.พลังงาน บิด ย่อมมากขึ้น.
Not saying this is fake because obviously alot of time and money was invested into this project. I would like to see meters showing input and output
It's OK but sir generator has maintenance that's costly
The brushes will be changed in every
Monthly or within 10 to 15 days as I think
Marvelous, Fantabulous, excellent invention . My best wishes. God bless .
Excellant sir, this creation tangibly debunks thermodynamic roles, n seems to be based on Vedic understanding of energy (infinite). You spoke of using spoked flywheel for accelerated n amplified performance. If u mimic the sudarshan chakra, with exactly 108 equidistant spokes, u will find the sweet spot for the constant to produce highest performance. Very excited n eager to know more. Best wishes! 🙏
Bullshit....... Go and read your science book in 8th standard.
But as per Gita and physics energy cant be created or destroyed. It just transforms from one state to another. Here the excess energy created will it tilt the solar system or just our Glaxy?
Gita doesn't say energy can't be created or destroyed. What do you think God's Bramha and Shiva do? In fact, the battery laid by Agastya does create, transfer and destroy energy as required in endless cycles. The limits of white man physics are now obvious to many. If you still want to follow, your choice. But the Hindu science is clear about limitless-ness of energy.
@@maarunan3256 Agastya aavtaar in Hyderabad. Vadnagar sant in Delhi🙏🙏
Please don't disgrace vedic science like this. Even the creators of the video did not bring vedic into this fake looking video.
Their face, this was discovered by our master in Chittoor district on 1992. The project did not come into use due to lack of encouragement from the then Chandrababu government.
Hi I am impressed by your work. I want to know what grade of magnet you used to create this beautiful work? Neodymium N52 or N50? THANKS
Неодим√52 наверно
Nice
Can you build custom apparatus for customer?
One cannot get more energy than that is “charged” in the flywheel given by the equation = 1/2 mV^2
So, there is no free lunch. The efficiency of this system shall be approx 80% and hence the system shall stop after delivering 80% of what it has received. 20% is the loss…
Are you trying to fool the viewers or you mis understood the law of conservation of energy. If you are saying these fly wheel will run for ever. Why have you started it with the motor? It was stationery in the beginning. By using 5hp or 10hp motor you rotated 50 ton 100 ton fly wheel at 450 RPM for x minutes. That much of electrical energy converted into mechanical energy, you have connected another generator to convert that mechanical energy to electrical energy and connected lesser load. It will run for some time till the kinetic energy is converted into electrical energy. If there was no load connected the flywheel will rotate for longer time. This is highschool science.
Practically it wont run even few seconds on load (which will act as brake). If we take the efficiency as 99.99% it will spin for few milliseconds theoretically (*as the load on it increases the losses will increase)
High school science never takes in to account gravity for kinetic energy or angular momentum equations. This patent from Bhaskar covers that untapped gravity for producing electricity.
Visit his workshop mister
Actually u did not understood concept i think he is extracting energy after some point with the less energy and generating more with the velocity and the difference between the low power consumption and high genaration and the difference is actual power generation well I am not good in it but I understood concept
He is a scientist. Obviously he knows that high school science. Still he spent lots of time and money. I think there are something that we don’t understand. I am requesting that scientist please describe the theory/principle and please consult this local electric sub division and supply your electricity. Also please apply for patent.
No, it won't run for 24 hrs 360 days.
Don't fool us please
Congratulations to this invention
46 kw genrat kar Raha hai
Consume kitni kw kar raha hai
But i think maintenance charges will touch other electricity generator's raw material's cost
Means its energy unit cost is equivalent to others energy units by maintenance
Agree, what is the Flywheel weight and Plumber block maintenance cost
👏👏👏👏👏
👍👍👍
Why such technology is not available in the market for people consumption
सर यदि यह सही प्रोजेक्ट है तो 60 किलोवाट के प्रोजेक्ट के लिए कितना रु का इस्टिमेट बनेगा कृपया आप मेरे समस्या का निवारण कर सकते है ।।
Please install a system in an Industry and provide energy at low cost. Publish the power input, power output and power gain data. Congratulations. If you prove a practical use for one year, then you can start mass production.. one question, Say now you are using a 4' dia, 12 ton flywheel, if you use a spokes flywheel 16' dia and is a 3 ton flywheel is enough? let me know, thanks. May Lord Venkateswara bless you.
Scam when the yellow is not disconnected from the grid load then how come it ia green energy ...it is constantly taking energy from the grid
👍گوڈ 🇵🇰
Once Physics says that a perpetual motion machine is not possible then it is not. Even if you don't put any external load, still the generator out put will not be sufficient to run the motors as input can never be equal to out put due to frictional losses. Eventually the machine will stop only thing is, bigger the momentum longer is the time before it stops.
দাদা আপনাদের পাওয়ার প্লান্ট দেখে অনেক ভালই লাগছে এটা বানাতে কত টাকা খরচা আসে আমি বাংলাদেশ থেকে বলছি আপনারা জানাবেন
زبردست
BAI GOOD BAI ZARIEY. TUB YLALL. KICA. HALIY JI
Ooooooh.
Now we provide power to the World.
🤭🤭🙃🙃🙃
The hard work behind making of this setup is appreciable but, fundamental law of energy cannot be break in which it energy can't be created nor destroyed it is just converted into one form to another. In this setup the energy supplied to gain momentum of flywheel is just converted back into electrical energy by alternator, your claim can't be true until and unless you kept powering the flywheels and extracting energy back from it which i think that it might be not suitable way as mechanical losses and other losses are acting in this procedure undoubtedly this setup can be used for backup power supply with no interruption between switching but as you claim that it can generated energy can't be justified.
Correct..
Right 👍
Foolish fellow he don't know simple physics
Very good sir
Sir how much does this plant cost?
India and Pakistan and Bangladesh seem to be the only people pursuing this technology. However, they do not sell any finished product.