✨ Miele Dishwasher - Won't Drain - 5 Minute Fix ✨
Вставка
- Опубліковано 2 жов 2024
- ✨ Miele Dishwasher - Won't Drain - 5 Minute Fix ✨
This Video shows a Quick and Easy way to free up your Miele’s Drain Impeller.
All you need is a kitchen knife or screwdriver and 5 minutes of your time.
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-UA-cam Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊
Article I Wrote on Fixing a Dishwasher that Won’t Drain: www.familyhand... *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens *
*
Click Here To Order A Miele Dishwasher Original Manufacturer FILL VALVE: luwaluxury.com... Waterproof System for G800, G1000 and G2000 series
Click Here To Order A Miele Non-Return Valve For Your Miele Dishwasher: luwaluxury.com... Non-Return Valve, G2000, G4000 and G5000 Series
Click Here To Order Miele Dishwasher Cleaner and Conditioner: luwaluxury.com... Dishwasher Conditioner
Click Here To Order A New Miele Dishwasher Drain Hose: luwaluxury.com... Drain Hose for G2000, G4000, G5000 series ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly. - Навчання та стиль
Thank you you are amazing
Thanks so much 👍😊
Thanks. Different model but same principle. Dishwasher back online, and no money out of the bank account. You’re a legend
Thanks so much Matthew😊😊😊
You fixed my machine! (Well, we did...). To help others: My impellor was still turning, actually quite freely, but rooting around with my finger I found a clump of hair/lint/grossness that was wrapped around the core of the impellor blades. It wasn't noticeable at first, but after pulling it out and giving it a light scrub with a pipe brush (glass straw brush) and dish soap to get rid of the light grease build up, it fixed my problem. BIG THANK YOU.
Nicely Done😊👍
Hi Scott , you made my day! Thank you very much. It's indeed a piece of glass in there. A plumber here in Germany is very expensive and you saved me about 200 euros. 1000 thanks!
Awesome,
Thanks Iva😊
Thank you, it worked 😀
Worked for me! I was about to get a new dishwasher. You saved me big bucks.
That is awesome news😊
Man, you saved me a few bucks, thanks a lot !!!
Happy to help😊😊😊
Thank you for this video! Fixed the problem & I became a household hero for a few minutes.
You are a hero👍
Thank you! I needed a picture of older valve- this was hard to find and you are the only one with this G892 SCU PLUS type HG01 info. Just great!
Fixed mine too. Gotta love the internet.
Nice job Drew👍😊
Thank you so much. Found some hair in the impeller, which had tangled up the rotor, removed with tweezers, and wallah! During Covid, it's really great to learn this stuff and save some money for my family.
Thank-you so much! I'm a pensioner and a widow and really impractical but have to try and deal with things like this. I watched your video twice then had a go and removed a cherry stone a bit of plastic and managed to put it back together again. And it works! You don't know just how momentous this is for me - thank-you, thank-you THANK-YOU
Hi Scott, thanks, just got back from the store and there was water on the floor :-( Found your video and 10 mins later Miele is chugging on again - thanks a million, much appreciated (Keith in Switzerland)
Nice job Keith, and thanks for your feedback from Switzerland👍
Thank you Scottthefixitguy - I had some lemon pips stuck in the non return valve so the ball bearing wouldn't move. I love it when I can fix it and save myself massive call out charges. Fab!!!
+jaffaboy1999
Great Job,
I've seen that same problem with the Miele dishwasher one-way valve many times while working out in the field
Thank you it worked!
You’re welcome 👍
Life saver thank you
You’re very welcome 👍
I just wanted to writhe the very same comment. Hopefully the fix will work...
Thanks for this! Helped me find the uncooked pasta shell that was clogging the drain line!
Fixed my Machine again today with the fork trick. Second time now. 20y and still going strong
Nice work!😊
Thanks. It worked for our dishwasher. It was an olive pit that caused the problem.
Cheers man. Had this fault and was worried the dishwasher was a write off as cost of getting repaired would be too great. Followed your instructions and working perfectly again. 👌
Thank you ! Will try this as I have the exact issue
Awesome thank you😊
It's still not draining. Helppppppp
Thank you! Your video was exactly to the point and led me straight to my problem.
Excellent, thanks Rico😊
Thank you! This video was unbelievably helpful.
Thanks Micah😃👍
Super helpful thanks so much!
Glad it was helpful!👍😊
Again - thanks so much saved me a great deal of time and money.
Awesome! Thanks loads, found some plastic bits stopping the ball bearing moving. Now sorted + no need to call someone out for a repair!
You made my day, thanks!
Awesome,
Thank you😊
I emptied the dirty water from the bottom with a cup before I started the process so I could see the base. Mine must be a later model as no metal clip over the impellor just a plastic clip incorporated in the body. I found that some corn kernels (from my kids making popcorn!) had got stuck in the impellor but once out all came good. Had to turn machine on and off and on, now working again. Many thanks for this videa.
Great job Kevin👍😊
Excellent advice, miele dw running again, thanks
Thanks Jeff😊👍
Nice video. I had a pistachio shell next to steal ball ..
I’ve seen that same thing at least 3 times😂😂😂
Thanks for the detailed instructions. Ball bearing was stuck. A little rubber nub was stuck in there.
Yes, thank you! - last time I paid for Miele to do this for me.......
+プラニディンタモイラ
Excellent to hear it's working
Thanks to you!
Thank you 🙏
You’re welcome 😃
Hi Scott! I cleaned all the filters, cleaned the valves, checked the impeller, and the dishwasher still won’t fill. Is there anything else that I can check? Thanks!
You might have water caught in the drip tray below the dishwasher,
That will keep the dishwasher from filling with new water.
You can remove the two panels located below the Dishwasher Door and unplug it, and then use a sponge to sponge out the water and after that it should fill.
Thanks. Big help
You’re welcome😊
Danke schön 👍👌
Thank you😊
Thank you man, it totally worked. (Some popcorn found its way there)
You're welcome👍
Helpful, thank you.
Hi,
Do you happen to know what the 'botton' like object is to the left of the pump?
Thanks
Hi Scott, could you tell me what is the metal prong on the left of the part you are working on in this video, i pushed mine inside and now it won't come out?? Anyone! Thanks from Australia
Hi Eric,
That’s the temperature sensor.
Just unplug your Miele.
Remove the panels below the door and reach in and push it back out👍
Thank you for this tutorial! Indeed the impeller was blocked by a piece of something woody.
Glad it helped!😊😊
Hi Scott, David here. Just subscribed. I have a Mile too, a different brand.
Just unblocked the washer follow your instruction. The culprit was a piece unpop popcorn. It stuck between the shinny ball bearing.
Thanks for your upload. Please upload more life hacks to save mum and dad.
09/09/21
7 years since you may the video, but my savior for helping me fixing it!
Awesome, thanks so much Dennis😊I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
You’ll get Live Appliance help when ever you need it.
Is it normal if you remove the non return valve that water flows back? My machine (19 yrs old) doesn't pump all water usually on the 3rd cycle of any program the inlet/drain light flashes. Sometimes it completes the program. Can it be the attachment of my drain hose? I did everything you suggested from the videos :)
When you remove the valve you should get a fair amount of water coming back. Sometimes the extra water that ends up in the dishwasher isn’t a drain issue but instead it’s the fill valve not closing all the way and letting extra water come in. You could check the water level in the sump before going to bed and then the next morning see if it went up.
@@ScottTheFixItGuyChannel Thanks for your quick response. I've watched your video about replacing the fill valve. I think the sounds you described are there.
Should I compare the level after 1 completed program you ment? Or just level of water if the dishwasher was not used for a night? Is it typical that it switches off during the final cycle of the program in this case? (So the water gets drained for a certain amount of time and it checks the water level after that to see if it can continue the drying cycle?)
That’s right, and sometimes a leaky intake valve will let water sneak in and that will cause an intake/drain light to flash.
I got under the sink to locate the drain hose. It’s thin and flexible. I knew it was the one because when I shake it, the water in the dishwasher is affected. So I unscrewed the hose clamp and simply blew into the hose. It’s working fine now. Thanks Scott for getting me started.
Very good,
Thanks Ray
I did everything you said, I’m still getting an drain error beep 😢
Thanks Jill,
Can you email me at:
Scottthefixitguy@yahoo.com
Thanks for the great vidoe. But my Miele dishwasher drains at the beginning of a cycle, but NOT at the end of a wash or rinse cycle. I can open the door, power-cycle the machine, set it to rinse, close the door, and it drains the water out with gusto. (I have the drain hose detached from the garbage disposal to make sure i see the drain flow into the sink). Can i be sure it is not an issue with the pump, valve, or any blockage in the drain line? Would that mean a controller issue?
Thank you so much for taking the time to create and share this video. It helped me fix a issue where a rogue grape was causing a blockage. Saved me £100 in fallout charges. Wonderful stuff.
Excellent Neil,
Nice job👍
I did all this.Nothing is in there.Pump is not stuck but still not working and red light is still here. 😢
How high does the water get when it fills?
@@ScottTheFixItGuyChannel there is no water at the bottom so it means pump is working.I think the problem is with the arrival of water.
I did all of the steps and didn't find any obstructive objects. I finally went in the garage and grabbed the shopvac and just sucked out whatever was in the holes. Closed the door, turned it back on and it worked! Hope I didn't cause any potential harm, but as of now (5 minutes ago) its running and were doing a load. Thanks Scott!
Nice Job
Hi! My Miele dishwasher seems to have the drain going constantly, and ive tried the solution from your film but it still wont stop. In the process i managed to press, i do admit a little too hard, on the metal looking bar that you can see on the lower left at 0m 22s, so that it popped into the hole it sticks out of. I have basically screwed up my washing machine? 🙃
Best regards!
You’re still ok.
Just unplug it and remove the panel below the dishwasher door and then remove the small panel below that and reach in the opening to find that silver (temperature sensor) then push it back into that hole with the rubber grommet. Next, sponge out any water that you find in that metal bottom plate below the dishwasher.
After you put it back together it will run like new again 👍
@@ScottTheFixItGuyChannel wow! I believe this was my first comment on a youtube video since youtube became a thing, and this actually solved my issue. So breaking my silence is definetly deserved!
The temperature sensor was dangling just behind the panel as you described, and the bottom pan was filled with about 0.5 liters of water. Using a sponge i could dry the bottom pan up and when i turned on the power again, the drainage sound was gone, and the machine workes exactly as before!
Thank you so mutch for your input!
Hello again! I try my luck once more by going to the wizard himself!
The problem occurs more frequent now then before, and now it looks like im not able to get more than 3 cycles before having to empty the pan bellow. Do you know of there is a solution to this? Could it be that the machine is not standing correctly?
@@ScottTheFixItGuyChannelbump! 🎉
wow......just fixed mine too...saved £100 for sure! ......I actually found something lodged in the ball bearing part .....nothing in the impeller......That still stopped the pump from draining ....all good now
Great job Johnny😊👍
Hi there! Sadly this hasnt fixed mine! Prop and pipe are clear but water still isnt going down - any thoughts?
I would check the airgap up near the kitchen faucet.
Thanks for this video, it saved me from spending 200 euro for the miele service ;-)
+Der Markus
Excellent 😀
I accidentally pushed the silver knob (on the bottom left of your video) and it went in and disappeared can I fix it?
You can,
Just unplug it and remove the panels below the dishwasher door and reach in to push the temperature probe back through it’s rubber grommet👍
I tried using this fix but sadly nothing was clogging the drain, the ball or the impeller. I still get the drainage light, though.
Can you send me that question to:
Scottthefixitguy@yahoo.com
Hi, thanks for this video. I find that the bottom area that holds the xs water is very dirty and smelly, even when I do saniwash and do a wash with a vinegar rinse. Is there some other way to fix that? Had I known this dishwasher was always "wet" with that water in the bottom I never would have bought it cause it just doesn't seem very sanitary to me. It alway smells bad.
it could be that the non-return valve is not working as intended - and thus even though the water is seemingly being pumped out, it simply returns back in
Hi Scott, please help
Great video! Did find both a corn and a lemon pip in the impeller section. But but...the noise persists :(
Any further tips?
I can share a video of the noise it makes (only in the drain cycle and it does seem to drain though!)
Hi Ravi,
I would remove all the water near the drain impeller with a turkey baster and then carefully look under the impeller for a small piece of broken glass👍
@@ScottTheFixItGuyChannel tried this. Turkey baster and then vacuum cleaned it. It did feel like some sediment was under the impeller. It's clean now. But the sound persists!!
Is there any other moving part within i could check?
Thanks in advance
I bought a SC G 621 plus in 2001 in Germany. This was the second time in 16 years I had a problem. The first time I used a long thin piece of metal for the circulation pump and now this (another problem) video has saved me again. Thx
Thanks so much. Here's to another 16 years
Found a chicken wing bone in my impeller. Now it drains fine. Thanks a lot!
Glad it helped😊
Life saver. The wife's been going mental all week. Now she thinks I'm an engineering superhuman thanks to you!
Thanks Gary,
You are in engineering superhuman because you fixed it😊
Thank you. Worked like a charm.
Thanks so much😊
Thank you on Christmas Day.
You’re most welcome 👍
Merry Christmas 😊
Followed your instructions, for me as a women, very easy to follow.
Awesome,
That’s what I like to hear😊
Thank you so much. We apparently have had this problem, at least to some extent, for quite some time.
We had paid several hundred dollars a while back to try to get it fixed, though it didn't help.
We are confident that this has fixed it. Thank you!!!
Excellent , thank you😊
I accidentally pushed that little know that can be seen at 0:40 inside. Am I screwed?
Me too. Did you find out anything ?
Wow, I didn't even know you could take that off! I don't want to admit what I found wrapped round the Impellor, or stuck in the small pipe leading to it. I am now sat typing this listening to the sweet sound of a working dishwasher. Thanks so much Scott.
+Caroline Bannister
Thanks Caroline😀
If my advice has helped you, please visit: scottthefixitguy.com
To donat to:
Scott's Coffee Fund --
Help Keep Scott Caffeinated😀
🌎 Thank You
thank you sooooo much for your instructions. You just saved me hundreds of Euros. I feel great, that i fixed my dishwasher. Greetings from Germany!
+MunicYvonne
Very happy to help our German friends👍
Mine has nothing in it and it still won't drain!
Can you send that same question to my email? At: scottthefixitguy@yahoo.com
You are a legend, thanks for saving a plumbing bill for me.
We found something stuck in the ball barring part. Thank you so much 😊
I have a new return valve to give away for cost of shipping. It did not resolve our F18 problem.
Fantastic help. Fixed at first effort. Great video. We could see exactly what to do. Found a drink can ring tab impeding the workings, Thanks.
Hallo Scott, a really good video. I just had the problem that the water was not pumped out. And I had the problem, that the disassembly of the valve housing was a little stiff . But with your instruction to pull a little harder, it worked . In my case a little plastic part from a drings bottle blocked the impeller of the Pump. So thanks for your Video.
Glad it helped👍😊
But if it’s stuck how do you fix that? I don’t see anything stuck in mine but it won’t move more than a quarter turn each direction
Thanks Scott from Oz. Your video has helped me fix the drain issues on numerous occasions. Running a near empty cycle now.
Thanks so much Oz😊😊😊
Hi Scott, Thanks for the video. My Miele is a different model and has a different return valve. Principle is the same. Now that is fixed, my wife has to wait a few more years for a new dishwasher.
Glad it helped👍😊
Thanks so much! 3rd time I've done this so you've saved me a fortune!
Thanks for fix. My model did not have a stainless spring. The non return valve was clipped in by a plastic clip which had to be pressed back. fish bone was the issue.
Nice job😊
Thank you so very much as i did what you said and found a chip of a plate had the pump stuck...so put it on a few mins ago and it is running perfectly...
Thanks so much Chloe😊
Thank you Drew.20 year old Miele is working again.Impeller had a fibrous clump around a blade.I have subscribed! Gotta love Drew!
Thanks so much John for subscribing 😊😊😊
thanks, you sincerely saved me a lot of money for the technician!!!
thanks so much for your help!!!
Thank you
Your very welcome👍
I am having drain issue with my Miele dishwasher as well, but my problem seems to be different. I've tried to clean it as instructed by the manual and your video. However, when I gave it a try, my dishwasher still flashed the "Intake/Drain" light and water still wouldn't be drained. However, there's one thing that makes my situation different:
If I turn off the dishwasher, then turn it back on and start a new cleaning cycle (I used the Rinse & Hold cycle to test, fyi), the water accumulated will immediately be drained. Because my drain line is hooked up to a garbage disposal, I could see water coming out from the drain line right away. Unfortunately, once those water is drained, and new water starts to enter the dishwasher and accumulate, the "Intake/Drain" light will flash and water wouldn't be drained again.
Since the water can indeed be drained, my gut feeling is that the problem is not related to any mechanical draining mechanism (ie, the motor, the drain pump, etc). But I have no idea what the actual problem is. Anyone has a similar problem?
Sounds like it’s not happy with how much water comes in during fill.
At 5 minutes is the water just touching the bottom of the white filter handle?
Thank you savior 🙏🏼
You’re very welcome 👍😊
Thanks a lot. I just discovered and removed a cherry stone, which partly blocked the metal ball. That surely saved my quite a few euros!!! (My wife had almost called a technician from Miele!)
Nice Job Alexander👍
brilliant, sorted our Miele out, piece of glass as predicted. Tysm
Thank’s So Much Darce, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
You’ll get Live Appliance help when ever you need it.
It’s just $5.00
Nice video.
I'm wondering about the silver/metallic rod that (just as big as a drill bit) sticks out at the very bottom at the drainage area.
what is it for? I accidentally pushed it in and don't know how to retrieve it.
Hi Jon,
You can push it back in from under the front panel.its a temp sensor.
Any idea what would be causing it to drain only after a cycle is complete? It drains fine when first starting the cycle and goes through the whole thing but when opened, intake/drain is blinking and water is in the bottom, but everything is clean.
Can you send that same question along with some pictures to: scottthefixitguy@yahoo.com
Worked for me. The ball was stuck just like explained. Thanks for sharing Scott!
Excellent ,
Thanks Jorge👍
Thank you mate my girlfriend thinks I’m a genius now !
That’s all that matters👍😂😂😂
Thank you!!!! I was able to fix it. It was the impellor issue for me as well!
Thanks Nicholas😊
Happy Easter Scott, I followed your directions and it started to hum as it did before youtube, but then it started to work for a few minutes then stopped (it wasn't working before I followed your directions) then it made a funny noise and the intake drain is now flashing. Can it be the motor?
Hi Wendy, there’s a small piece of glass below the white plastic impeller .
Look carefully with a good flashlight and pull it out.
@@ScottTheFixItGuyChannel Hi again, I don't see any glass but after going through your directions agin last night, including the half toothless fork method, i got it to work on economy mode. I am very grateful!!
Awesome,
Thanks Wendy😊😊
Thanks much Scott!! It helped us today!!
Glad to hear it!😊👍
Thanks for your help. Now my dishwasher is working again :)
Awesome 👍👍👍
Thank you!!! We were just about to pull the whole dishwasher out, because we were sure the problem was in the pipe. Took us literally 3 minutes to fix the problem.
Thanks so much Danya😊
Many thanks, Scott.
Using the claw part of the hammer, we managed to deal with the hardest part of the job, which was to pull out the tube that holds the ball bearing, on top of which we found an olive pit perfectly lodged itself at the entrance of the hole, stopping the impeller from rotating. It was really less than a 5-minute job. Now I can show my husband how to do it, in case it happens again in the future!
Have a good weekend.
Tam
+ACACIA LODGE
Nice job Tam👍
Thanks for the tip re:claw part of the hammer!!
Oh thank God, I've been trying for two hours to get the damn thing off. I'll try that tomorrow, too sore, hot and bothered now. 🥵🤬🙃
Hi Scott, thank you for a great video, I have had this issue for a long time, but I need to do these step every day after every time I run the dishwasher, it just won't drain, after each cycle I have to do those step to drain the water and do rinse to drain the water and then use the dishwasher again for the next day, I check the non-return valve and there is noting stock to it and the ball inside moves around please advice!
I think the rubber seal inside is worn out .
I would call Miele USA and order a new one way valve 👍
@@ScottTheFixItGuyChannel , would you happen to have the part number or maybe a picture of it? , are you talking about (non-return valve 5269111) or one way valve is something different?
Thank you!
You're welcome!
Thank You !
You’re welcome 😊
How old is the dishwasher ?
18 years old👍
And which is the reference ?@@ScottTheFixItGuyChannel
worked exactly as described. Thank you Scott.
You’re most welcome😊